Description
net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it.
The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor.
The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.
The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor.
The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||
|---|---|---|---|---|---|---|---|---|---|
| zephyrproject | zephyr | unaffected |
|
No data.
No data.
| Vendor | Product | Confidence | Versions | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Zephyrproject | Zephyr | 100% |
|
Found an issue or want to improve our Enrichment? You can suggest it directly by opening an issue on our dedicated GitHub repository .
Remediation
No solution or workaround provided in the CVE record.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Sun, 11 Oct 2026 18:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Zephyrproject
Zephyrproject zephyr |
|
| Vendors & Products |
Zephyrproject
Zephyrproject zephyr |
Sun, 11 Oct 2026 17:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor. The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact. | |
| Title | Out-of-bounds read in IPv6 route forwarding when the nexthop neighbor has no link-layer address | |
| Weaknesses | CWE-125 | |
| References |
| |
| Metrics |
cvssV3_1
|
MITRE
Status: PUBLISHED
Assigner: zephyr
Published:
Updated: 2026-10-11T17:14:55.032Z
Reserved: 2026-08-11T19:57:38.944Z
Link: CVE-2026-19577
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-11T18:16:58.433
Modified: 2026-10-11T18:16:58.433
Link: CVE-2026-19577
Redhat
No data.
OpenCVE Enrichment
Updated: 2026-10-11T18:30:19Z
Weaknesses
-
CWE-125
Out-of-bounds Read