Export limit exceeded: 412821 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412821 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412821 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412821 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23259 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: free potentially allocated iovec on cache put failure If a read/write request goes through io_req_rw_cleanup() and has an allocated iovec attached and fails to put to the rw_cache, then it may end up with an unaccounted iovec pointer. Have io_rw_recycle() return whether it recycled the request or not, and use that to gauge whether to free a potential iovec or not. | ||||
| CVE-2026-23247 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: secure_seq: add back ports to TS offset This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets") tcp_tw_recycle went away in 2017. Zhouyan Deng reported off-path TCP source port leakage via SYN cookie side-channel that can be fixed in multiple ways. One of them is to bring back TCP ports in TS offset randomization. As a bonus, we perform a single siphash() computation to provide both an ISN and a TS offset. | ||||
| CVE-2026-23226 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: add chann_lock to protect ksmbd_chann_list xarray ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del). Adds rw_semaphore chann_lock to struct ksmbd_session and protects all xa_load/xa_store/xa_erase accesses. | ||||
| CVE-2026-23217 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: trace: fix snapshot deadlock with sbi ecall If sbi_ecall.c's functions are traceable, echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter may get the kernel into a deadlock. (Functions in sbi_ecall.c are excluded from tracing if CONFIG_RISCV_ALTERNATIVE_EARLY is set.) __sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code raises an IPI interrupt, which results in another call to __sbi_ecall and another snapshot... All it takes to get into this endless loop is one initial __sbi_ecall. On RISC-V systems without SSTC extension, the clock events in timer-riscv.c issue periodic sbi ecalls, making the problem easy to trigger. Always exclude the sbi_ecall.c functions from tracing to fix the potential deadlock. sbi ecalls can easiliy be logged via trace events, excluding ecall functions from function tracing is not a big limitation. | ||||
| CVE-2026-23214 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reject new transactions if the fs is fully read-only [BUG] There is a bug report where a heavily fuzzed fs is mounted with all rescue mount options, which leads to the following warnings during unmount: BTRFS: Transaction aborted (error -22) Modules linked in: CPU: 0 UID: 0 PID: 9758 Comm: repro.out Not tainted 6.19.0-rc5-00002-gb71e635feefc #7 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:find_free_extent_update_loop fs/btrfs/extent-tree.c:4208 [inline] RIP: 0010:find_free_extent+0x52f0/0x5d20 fs/btrfs/extent-tree.c:4611 Call Trace: <TASK> btrfs_reserve_extent+0x2cd/0x790 fs/btrfs/extent-tree.c:4705 btrfs_alloc_tree_block+0x1e1/0x10e0 fs/btrfs/extent-tree.c:5157 btrfs_force_cow_block+0x578/0x2410 fs/btrfs/ctree.c:517 btrfs_cow_block+0x3c4/0xa80 fs/btrfs/ctree.c:708 btrfs_search_slot+0xcad/0x2b50 fs/btrfs/ctree.c:2130 btrfs_truncate_inode_items+0x45d/0x2350 fs/btrfs/inode-item.c:499 btrfs_evict_inode+0x923/0xe70 fs/btrfs/inode.c:5628 evict+0x5f4/0xae0 fs/inode.c:837 __dentry_kill+0x209/0x660 fs/dcache.c:670 finish_dput+0xc9/0x480 fs/dcache.c:879 shrink_dcache_for_umount+0xa0/0x170 fs/dcache.c:1661 generic_shutdown_super+0x67/0x2c0 fs/super.c:621 kill_anon_super+0x3b/0x70 fs/super.c:1289 btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2127 deactivate_locked_super+0xbc/0x130 fs/super.c:474 cleanup_mnt+0x425/0x4c0 fs/namespace.c:1318 task_work_run+0x1d4/0x260 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x694/0x22f0 kernel/exit.c:971 do_group_exit+0x21c/0x2d0 kernel/exit.c:1112 __do_sys_exit_group kernel/exit.c:1123 [inline] __se_sys_exit_group kernel/exit.c:1121 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1121 x64_sys_call+0x2210/0x2210 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe8/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x44f639 Code: Unable to access opcode bytes at 0x44f60f. RSP: 002b:00007ffc15c4e088 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00000000004c32f0 RCX: 000000000044f639 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004c32f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Since rescue mount options will mark the full fs read-only, there should be no new transaction triggered. But during unmount we will evict all inodes, which can trigger a new transaction, and triggers warnings on a heavily corrupted fs. [CAUSE] Btrfs allows new transaction even on a read-only fs, this is to allow log replay happen even on read-only mounts, just like what ext4/xfs do. However with rescue mount options, the fs is fully read-only and cannot be remounted read-write, thus in that case we should also reject any new transactions. [FIX] If we find the fs has rescue mount options, we should treat the fs as error, so that no new transaction can be started. | ||||
| CVE-2026-23213 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Disable MMIO access during SMU Mode 1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access MMIO registers during this window (e.g., from interrupt handlers or other driver threads) can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, set the `no_hw_access` flag to true immediately after triggering the reset. This signals other driver components to skip register accesses while the device is offline. A memory barrier `smp_mb()` is added to ensure the flag update is globally visible to all cores before the driver enters the sleep/wait state. (cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4) | ||||
| CVE-2026-23208 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Prevent excessive number of frames In this case, the user constructed the parameters with maxpacksize 40 for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer size for each data URB is maxpacksize * packets, which in this example is 40 * 6 = 240; When the user performs a write operation to send audio data into the ALSA PCM playback stream, the calculated number of frames is packsize[0] * packets = 264, which exceeds the allocated URB buffer size, triggering the out-of-bounds (OOB) issue reported by syzbot [1]. Added a check for the number of single data URB frames when calculating the number of frames to prevent [1]. [1] BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506 Call Trace: copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611 prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333 | ||||
| CVE-2026-23207 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer check in IRQ handler Now that all other accesses to curr_xfer are done under the lock, protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the spinlock. Without this protection, the following race can occur: CPU0 (ISR thread) CPU1 (timeout path) ---------------- ------------------- if (!tqspi->curr_xfer) // sees non-NULL spin_lock() tqspi->curr_xfer = NULL spin_unlock() handle_*_xfer() spin_lock() t = tqspi->curr_xfer // NULL! ... t->len ... // NULL dereference! With this patch, all curr_xfer accesses are now properly synchronized. Although all accesses to curr_xfer are done under the lock, in tegra_qspi_isr_thread() it checks for NULL, releases the lock and reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer(). There is a potential for an update in between, which could cause a NULL pointer dereference. To handle this, add a NULL check inside the handlers after acquiring the lock. This ensures that if the timeout path has already cleared curr_xfer, the handler will safely return without dereferencing the NULL pointer. | ||||
| CVE-2026-23143 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix misalignment bug in struct virtnet_info Use the new TRAILING_OVERLAP() helper to fix a misalignment bug along with the following warning: drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] This helper creates a union between a flexible-array member (FAM) and a set of members that would otherwise follow it (in this case `u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This overlays the trailing members (rss_hash_key_data) onto the FAM (hash_key_data) while keeping the FAM and the start of MEMBERS aligned. The static_assert() ensures this alignment remains. Notice that due to tail padding in flexible `struct virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data` (at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at offset 84 in struct virtnet_info) are misaligned by one byte. See below: struct virtio_net_rss_config_trailer { __le16 max_tx_vq; /* 0 2 */ __u8 hash_key_length; /* 2 1 */ __u8 hash_key_data[]; /* 3 0 */ /* size: 4, cachelines: 1, members: 3 */ /* padding: 1 */ /* last cacheline: 4 bytes */ }; struct virtnet_info { ... struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */ /* XXX last struct has 1 byte of padding */ u8 rss_hash_key_data[40]; /* 84 40 */ ... /* size: 832, cachelines: 13, members: 48 */ /* sum members: 801, holes: 8, sum holes: 31 */ /* paddings: 2, sum paddings: 5 */ }; After changes, those members are correctly aligned at offset 795: struct virtnet_info { ... union { struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */ struct { unsigned char __offset_to_hash_key_data[3]; /* 792 3 */ u8 rss_hash_key_data[40]; /* 795 40 */ }; /* 792 43 */ }; /* 792 44 */ ... /* size: 840, cachelines: 14, members: 47 */ /* sum members: 801, holes: 8, sum holes: 35 */ /* padding: 4 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 8 bytes */ }; As a result, the RSS key passed to the device is shifted by 1 byte: the last byte is cut off, and instead a (possibly uninitialized) byte is added at the beginning. As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also moved to the end, since it seems those three members should stick around together. :) | ||||
| CVE-2026-23137 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing. | ||||
| CVE-2026-23035 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv mlx5e_priv is an unstable structure that can be memset(0) if profile attaching fails. Pass netdev to mlx5e_destroy_netdev() to guarantee it will work on a valid netdev. On mlx5e_remove: Check validity of priv->profile, before attempting to cleanup any resources that might be not there. This fixes a kernel oops in mlx5e_remove when switchdev mode fails due to change profile failure. $ devlink dev eswitch set pci/0000:00:03.0 mode switchdev Error: mlx5_core: Failed setting eswitch to offloads. dmesg: workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 $ devlink dev reload pci/0000:00:03.0 ==> oops BUG: kernel NULL pointer dereference, address: 0000000000000370 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 15 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc5+ #115 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100 RSP: 0018:ffffc9000083f8b8 EFLAGS: 00010286 RAX: ffff8881126fc380 RBX: ffff8881015ac400 RCX: ffffffff826ffc45 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881035109c0 RBP: ffff8881035109c0 R08: ffff888101e3e838 R09: ffff888100264e10 R10: ffffc9000083f898 R11: ffffc9000083f8a0 R12: ffff888101b921a0 R13: ffff888101b921a0 R14: ffff8881015ac9a0 R15: ffff8881015ac400 FS: 00007f789a3c8740(0000) GS:ffff88856aa59000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000370 CR3: 000000010b6c0001 CR4: 0000000000370ef0 Call Trace: <TASK> mlx5e_remove+0x57/0x110 device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140 | ||||
| CVE-2026-23017 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix error handling in the init_task on load If the init_task fails during a driver load, we end up without vports and netdevs, effectively failing the entire process. In that state a subsequent reset will result in a crash as the service task attempts to access uninitialized resources. Following trace is from an error in the init_task where the CREATE_VPORT (op 501) is rejected by the FW: [40922.763136] idpf 0000:83:00.0: Device HW Reset initiated [40924.449797] idpf 0000:83:00.0: Transaction failed (op 501) [40958.148190] idpf 0000:83:00.0: HW reset detected [40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8 ... [40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf] [40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf] ... [40958.177932] Call Trace: [40958.178491] <TASK> [40958.179040] process_one_work+0x226/0x6d0 [40958.179609] worker_thread+0x19e/0x340 [40958.180158] ? __pfx_worker_thread+0x10/0x10 [40958.180702] kthread+0x10f/0x250 [40958.181238] ? __pfx_kthread+0x10/0x10 [40958.181774] ret_from_fork+0x251/0x2b0 [40958.182307] ? __pfx_kthread+0x10/0x10 [40958.182834] ret_from_fork_asm+0x1a/0x30 [40958.183370] </TASK> Fix the error handling in the init_task to make sure the service and mailbox tasks are disabled if the error happens during load. These are started in idpf_vc_core_init(), which spawns the init_task and has no way of knowing if it failed. If the error happens on reset, following successful driver load, the tasks can still run, as that will allow the netdevs to attempt recovery through another reset. Stop the PTP callbacks either way as those will be restarted by the call to idpf_vc_core_init() during a successful reset. | ||||
| CVE-2026-23007 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: zero non-PI portion of auto integrity buffer The auto-generated integrity buffer for writes needs to be fully initialized before being passed to the underlying block device, otherwise the uninitialized memory can be read back by userspace or anyone with physical access to the storage device. If protection information is generated, that portion of the integrity buffer is already initialized. The integrity data is also zeroed if PI generation is disabled via sysfs or the PI tuple size is 0. However, this misses the case where PI is generated and the PI tuple size is nonzero, but the metadata size is larger than the PI tuple. In this case, the remainder ("opaque") of the metadata is left uninitialized. Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the metadata is larger than just the PI tuple. | ||||
| CVE-2026-22996 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv mlx5e_priv is an unstable structure that can be memset(0) if profile attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to reference the netdev and mdev associated with that struct. Instead, store netdev directly into mlx5e_dev and get mdev from the containing mlx5_adev aux device structure. This fixes a kernel oops in mlx5e_remove when switchdev mode fails due to change profile failure. $ devlink dev eswitch set pci/0000:00:03.0 mode switchdev Error: mlx5_core: Failed setting eswitch to offloads. dmesg: workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 $ devlink dev reload pci/0000:00:03.0 ==> oops BUG: kernel NULL pointer dereference, address: 0000000000000520 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_remove+0x68/0x130 RSP: 0018:ffffc900034838f0 EFLAGS: 00010246 RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10 R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0 R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400 FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0 Call Trace: <TASK> device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140 | ||||
| CVE-2026-100077 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Recover HW before retire hung submit During recovery, it is not safe to retire the hung submit before we recover the GPU. Retiring the submit triggers BO free and that can result in GPU pagefaults since the GPU may be actively accessing those BOs. To fix this, retire the submits after gpu recovery is complete in recover_worker(). Patchwork: https://patchwork.freedesktop.org/patch/730655/ | ||||
| CVE-2026-100076 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management xmit_frame together with its xmit_buf from the driver's fixed-size management-TX pools via alloc_mgtxmitframe(). On the normal path the frame is handed to dump_mgntframe(), which transfers ownership and eventually returns both objects to their pools (the frame and, for beacons, the buf in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion path). Several error/edge paths return early after a successful alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never transferred and neither object is freed: - issue_beacon(): beacon larger than 512 bytes - issue_probersp(): cur_network->ie_length > MAX_IE_SZ - issue_probersp(): kzalloc() of the SSID scratch buffer fails - issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP Because alloc_mgtxmitframe() removes the frame and buf from their free lists (list_del_init) without placing them on any pending list, an orphaned pair is on no list and referenced by nobody, so it is only reclaimed at driver teardown. Repeated hits progressively exhaust the management-TX pools until alloc_mgtxmitframe() returns NULL and the interface can no longer send beacons or probe/assoc responses. Free the frame and buffer on these paths, matching the existing correct error handling in issue_assocreq(). | ||||
| CVE-2026-100074 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_refcount field as unique BPF_REFCOUNT is not marked as a unique field, while it should be. Fix this oversight. | ||||
| CVE-2026-100072 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: platform: Use acpi_bus_get_primary_device() The acpi_get_first_physical_node() usage in acpi_platform_fill_resource() and acpi_create_platform_device() is generally unsafe because in theory the device returned by it may be freed at any time [1]. It is also inefficient because acpi_get_first_physical_node() is called multiple times for the same argument which can be avoided. Address these issues by using acpi_bus_get_primary_device() instead of acpi_get_first_physical_node() and adjusting the code to call it just once at the beginning of and acpi_create_platform_device() and drop the device reference acquired by it upon the return from that function. | ||||
| CVE-2025-71313 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer. | ||||
| CVE-2025-71306 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec() KASAN reported a stack-out-of-bounds access in ima_appraise_measurement from is_bprm_creds_for_exec: BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0 Read of size 1 at addr ffffc9000160f940 by task sudo/550 The buggy address belongs to stack of task sudo/550 and is located at offset 24 in frame: ima_appraise_measurement+0x0/0x16a0 This frame has 2 objects: [48, 56) 'file' [80, 148) 'hash' This is caused by using container_of on the *file pointer. This offset calculation is what triggers the stack-out-of-bounds error. In order to fix this, pass in a bprm_is_check boolean which can be set depending on how process_measurement is called. If the caller has a linux_binprm pointer and the function is BPRM_CHECK we can determine is_check and set it then. Otherwise set it to false. | ||||