Export limit exceeded: 25313 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25313 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98337 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't start a ROC while scanning The ROC work can be pending when a scan starts (which requires ROC list to be empty, but that's possible), and then a new ROC can be added to the list and the work will pick it up. Avoid starting that ROC if a scan made it between things, as otherwise we'll hit a warning later: WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0 Workqueue: events_unbound cfg80211_wiphy_work Call Trace: __ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537 ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513 | ||||
| CVE-2026-98264 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: reset device before deleting virtqueues virtsnd_remove() and virtsnd_freeze() delete the virtqueues before resetting the device. del_vqs() frees the vring backing, but does not provide a generic device quiesce operation. In particular, modern virtio-pci keeps enabled queues active until the device is reset. Reset the device before deleting the virtqueues so it can no longer access the vring memory when that memory is released. This also covers probe failures after DRIVER_OK, which unwind through virtsnd_remove(). | ||||
| CVE-2026-98363 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted any larger value from the SCP firmware. The shared-memory reply only holds MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB). The missing upper bound dates back to the original SCPI DVFS support. Reject zero and out-of-range counts in one check and return -EINVAL. | ||||
| CVE-2026-98271 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: do not leave stale header offsets after pskb_carve() pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove the first bytes of a packet and reallocate skb->head. All the headers that were present before the operation are gone, but both functions call skb_headers_offset_update(skb, 0), which is a no-op : skb->mac_header, skb->network_header, skb->transport_header and skb->csum_start keep their old values and now describe bytes which are no longer there. Both helpers size the new head from the old skb_end_offset(), so the stale offsets still land inside the new allocation. They point past skb_tail_pointer() though, to bytes that were never initialized. pskb_carve_inside_nonlinear() is the worst case, because it leaves a zombie skb with an empty linear part (skb->data == skb_tail_pointer(skb), skb_headlen(skb) == 0), while skb_mac_header_was_set() is still true and skb->mac_header is way ahead of skb->data. The only user of pskb_extract() is rds_tcp_data_recv(), and the carved skb is queued on tinc->ti_skb_list. When the RDS incoming message is released, rds_tcp_inc_free() calls skb_queue_purge(), which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is visible from drop_monitor, which then tries to pull back to the (bogus) mac header : skbuff: __skb_pull(len=234) skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0 end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288 shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5)) csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0) hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60 kernel BUG at ./include/linux/skbuff.h:2847! Add skb_carve_reset_headers() to mark the mac and transport headers as not set, reset the network header, clear skb->mac_len, and drop a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes anything). Invalidate the inner offsets as well. Unlike mac_header and transport_header they have no "unset" sentinel, so a leftover non-zero value still looks like a real header. Zero skb->inner_mac_header, skb->inner_network_header, skb->inner_transport_header, skb->inner_protocol and skb->encapsulation, so that all the header state is invalidated in one place. v2: fixed an inaccurate changelog. The stale offsets stay inside the new skb->head, which is never smaller than the old one, they simply point past skb_tail_pointer() to bytes that are gone. Thanks to Xuanqiang Luo for insisting on this. Also invalidate the inner header state, as suggested by the netdev AI review : https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com | ||||
| CVE-2026-98272 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scheme is supported only if the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8). This is already checked in mvpp2_probe() during the initial activation of percpu_pools. However, mvpp2_change_mtu() may later call mvpp2_bm_switch_buffers(priv, true) without this check, which can lead to an out-of-bounds access in the priv->page_pool array in mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ entries, and mvpp2_get_nrxqs() may return exactly that value. The per-CPU scheme then doubles it to nrxqs * 2, exceeding the array bounds. Check that the hardware version is MVPP22 or newer and that the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS before switching to per-CPU mode. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-98308 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when hardware streams are exhausted. Move the tracepoint after the NULL check because its payload accesses the assigned stream tag. Detected by static analysis and reviewed with AI-assisted source auditing. | ||||
| CVE-2026-98310 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory __xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM reference. Shrinking a bo outside system memory invalidates its GPU mappings, which needs the device resumed, so while it is runtime suspended the page table zap trips an assert and the TLB invalidation returns -ENODEV: WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe] xe_bo_shrink+0x20f/0x2b0 [xe] __xe_shrinker_walk+0x174/0x410 [xe] xe_shrinker_scan+0x10c/0x1e0 [xe] do_shrink_slab+0x176/0x7e0 drop_caches_sysctl_handler+0x9c/0xf0 Take a reference before walking a memory type other than XE_PL_SYSTEM and stop there if it cannot be acquired. Reuse the shrinker's existing acquire path, which resumes the device directly where reclaim allows that and otherwise queues the PM worker for a later scan. Stop the walk once the scan target is met, so a satisfied scan does not wake the device. System memory is still reclaimed while the device is suspended. Gate this on xe_device_is_l2_flush_optimized(), the same condition under which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode vm, so reclaim is unaffected elsewhere. The System CCS copy already has its own reference in xe_bo_shrink(). Only a non-fault-mode vm can reach this, since a fault-mode vm requires LR mode and that holds a runtime PM reference for the vm's lifetime. Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is runtime suspended. v2: simplify needs_rpm check. (Matt) retarget Fixes tag since the issue occurs with the non-fault-mode path added by 4e7ebff69aed. v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas) v4: stop the walk once the scan target is met. (Sashiko) v5: rebase on the freed page accounting fix. (Sashiko) v6: reuse the shrinker acquire path so runtime pm can be resumed directly instead of always queueing a worker. (Thomas) v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas) (cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) | ||||
| CVE-2026-98319 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not set, a drm_pending_vblank_event will be allocated. If later, there is an allocation failure or another failure at setup_out_fence(), that event will not have base.fence set and it will not be released at complete_signaling(). Release the event and set crtc_state->event to NULL just like in the DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at drm_event_reserve_init(). That is, prepare_signaling() releases the event and there is nothing to be done at complete_signaling(). Use drm_event_cancel_free() as that will also undo drm_event_reserve_init() in case it has been called. | ||||
| CVE-2026-98344 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix device kref underflow in dma_chan_put() dma_chan_get() takes chan->device->ref only on the slow path: /* no kref on fast path */ if (chan->client_count) { __module_get(owner); chan->client_count++; return 0; } if (!try_module_get(owner)) return -ENODEV; if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero() dma_chan_put() drops the ref unconditionally, so every fast-path get/put pair drops one extra device reference. The bug fires when two conditions hold together: a non-private provider has a persistent client holding chan->client_count > 0 and another client cycles dmaengine_get()/dmaengine_put(). When the kref hits zero, the subsequent dma_find_channel() returns NULL even though the provider module is still loaded. Fix this by dropping device->ref only on the last put, matching the single slow-path get. | ||||
| CVE-2026-98352 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ credits in the ADDR_RESOLVED handler via ib_cq_pool_get(), before the peer is connected. create_cm() can return -ERESTARTSYS from wait_event_interruptible_timeout() without destroying the CM ID. The init_conns() and stop-and-destroy paths then call destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards rdma_destroy_id(). CMA serializes the handler against rdma_destroy_id() with handler_mutex, but that does not order the GET against destroy_con_cq_qp(). If ADDR_RESOLVED has already passed the DESTROYING check, it can take con_mutex, GET credits, and then lose the con to kfree. Device unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup(). Set a per-connection flag under con_mutex before CQ/QP teardown so a racing ADDR_RESOLVED cannot borrow credits after teardown has begun. | ||||
| CVE-2026-98284 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups() uses krealloc() under netlink_table_grab(). Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old bitmap is freed immediately. Two readers of nlk->groups / nlk->ngroups do not hold the netlink table lock: 1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the rhashtable walk in __netlink_diag_dump(), which only holds RCU. Only the mc_list part of the dump takes nl_table_lock. 2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been lockless since commit 21e4902aea80 ("netlink: Lockless lookup with RCU grace period in socket release"). Both can read a freed buffer, and sk_diag_dump_groups() can also read past the end of the old (smaller) buffer if it happens to load the old @groups pointer together with the new @ngroups value, copying the result into a NETLINK_DIAG_GROUPS attribute. This is the same class of bug that commit f773608026ee ("netlink: access nlk groups safely in netlink bind and getname") fixed for bind() and getname(); these two readers were missed. Simply grabbing the table lock in sk_diag_dump_groups() is not an option, because it is also called with nl_table_lock already held from the mc_list section of the dump. Make the lockless readers safe instead: - Allocate a new bitmap and free the old one after an RCU grace period, instead of relying on the implicit kfree() done by krealloc(). - Publish @groups before @ngroups, both with release semantics, and have the lockless readers load @ngroups first. A reader can then never pair the new (bigger) size with the old (smaller) buffer, and a reader picking up the new pointer while still seeing the old size is guaranteed to see the initialized bitmap. netlink_realloc_groups() is called from process context (bind() and setsockopt()), so kfree_rcu_mightsleep() can be used, once the table has been released. | ||||
| CVE-2026-98289 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unify scc_index when finalising SCC in __unix_walk_scc(). Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.") changed Tarjan's algorithm to update lowlink with lowlink, which is called lowpoint (unix_vertex.scc_index). unix_vertex_dead() assumes all vertices in an SCC share the same lowpoint, but this is not always true if an SCC has two or more back edges, depending on the order of DFS. For example, the graph below has two back edges from B to A and from C to B. A --> B --> C ^ | ^ | `----' `----' If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A), each index and scc_index will be updated as follows. A --> B --> C C = (3, 3) (index, scc_index) B = (2, 2) A = (1, 1) A ... B ... C C = (3, 2)<-. ^ | B = (2, 2) -' `----' A = (1, 1) A ... B ... C C = (3, 2) ^ | . . B = (2, 1)<-. `----' .... A = (1, 1) -' Then, unix_vertex_dead() thinks that B is passed to another SCC with scc_index 2, and the SCC is not garbage-collected. This does not happen if DFS walks in a different order below or starts from B. 1 3 A --> B --> C ^ | ^ | `----' `----' 2 4 Let's unify scc_index across the SCC when finalising it. Note that updating v->index was previously done in unix_scc_dead(), when called from __unix_walk_scc(), just to save one loop. Since __unix_walk_scc() now iterates over the SCC anyway, the update is moved back to __unix_walk_scc() and 'fast' argument is dropped. | ||||
| CVE-2026-98291 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the FRBD array access, allowing frbd_index == rxq->count to pass through and index one element past the end of the array. Change the check to >= rxq->count so every out-of-range index is rejected. This issue was reported by Claude Mythos. | ||||
| CVE-2026-64040 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix error return when vfs_mkdir() fails When vfs_mkdir() fails, the error code is not extracted from the returned error pointer. This causes mkdir_error to be reached with ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a proper error pointer. Fix this by extracting the error code from the error pointer when vfs_mkdir() fails. | ||||
| CVE-2026-98370 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix compat ALLOCSPI request use-after-free xfrm_state_netlink() builds the ALLOCSPI response with dump_one_state(), which already calls alloc_compat() with the response skb and header. xfrm_alloc_userspi() then calls alloc_compat() again, but passes the original request skb and its header. For a compat request, the translator therefore interprets the 228-byte compat xfrm_userspi_info as the 232-byte native layout and reads four bytes past the declared payload. It also publishes the translated child through the request's frag_list. A multicast clone of the request shares skb_shared_info and can observe that child. xfrm_user_rcv_msg() frees it after the request handler returns, racing a compat receiver which may still be copying from it and resulting in a use-after-free. Remove the redundant conversion. The response keeps its correct compat translation from dump_one_state(), and no child is attached to the inbound request. | ||||
| CVE-2026-98273 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] | ||||
| CVE-2026-98278 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the route to the tunnel's remote endpoint and set ctx->dev to its device, which is the tunnel itself when that route resolves back to the tunnel. dev_fill_forward_path() then makes no progress and trips WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to offload a flow through the tunnel. That routing loop is a configuration any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and ip6_tnl_xmit() already treat it as a tx error, so remove the warning and just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE when accessing forward path array") did for the path stack overflow. | ||||
| CVE-2026-98294 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Do not write to the serial port after it is closed hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP is set (for example, for the WCN399x family). A failed hci_dev_open_sync() following a successful qca_setup() calls hdev->close() but not hdev->shutdown(), so the port is closed while power->vregs_on is left true. qca_serdev_remove() then passes its power->vregs_on test and calls qca_power_off(), which writes to the closed port unconditionally. Seen on a WCN3988 by unbinding the driver after a controller failure. The trace below is from a 7.0.0 based kernel, where qca_power_off() was still named qca_power_shutdown(): Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: tty_set_termios+0x50/0x238 (P) ttyport_set_baudrate+0x84/0xc0 serdev_device_set_baudrate+0x24/0x40 qca_power_shutdown+0x158/0x1fc [hci_uart] qca_serdev_remove+0x54/0x68 [hci_uart] serdev_drv_remove+0x1c/0x2c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xc0 Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place it closes the port, before writing to it. The regulator disable is left unconditional so the controller is still powered down. The dangling serport->tty that turns this into a use-after-free is addressed in a separate patch. | ||||
| CVE-2026-98298 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist putting each entry into 'sg', but the entry length is read from 'sgl' (the list head) instead of 'sg' (the current entry): for_each_sg(sgl, sg, sg_len, i) { addr = sg_dma_address(sg); avail = sg_dma_len(sgl); /* should be 'sg' */ Consequently 'avail' is always the length of the first entry. For multi-sg lists this causes out-of-bounds reads when a later entry is shorter than the first, and silent data loss when it is longer. Single-sg or uniformly-sized lists happen to mask the issue. | ||||
| CVE-2026-98304 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops every rule off the list, and bcmgenet_open() calls it on each ifup. Every rule the user configured is silently lost: # ethtool -N eth0 flow-type ether dst $MAC action 0 Added rule with ID 0 # ethtool -n eth0 | grep -c Filter: 1 # ip link set eth0 down && ip link set eth0 up # ethtool -n eth0 | grep -c Filter: 0 Initialise the lists once at probe and restore the rules on open, as bcmgenet_resume() already does. | ||||