Export limit exceeded: 25220 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25220 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98293 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the parent socket with a reference held, which is dropped by sock_put() once the child socket has been set up. The error path taken when iso_sock_alloc() fails only calls release_sock() and returns, leaking the reference and thus the parent socket itself. Drop the reference on that path as well. | ||||
| CVE-2026-98343 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_put() drops the last reference on chan->device->ref, dma_device_release() runs and may free the dma_device along with its channels. dma_chan_put() then still reads chan->device->owner via dma_chan_to_owner() for the trailing module_put(). KASAN catches it: slab-use-after-free in dma_chan_put+0x3e6/0x4c0 Read of size 8 by task insmod/6319 Freed by task 6319: kfree+0x225/0x470 dma_chan_put+0x395/0x4c0 dmaengine_put+0xf8/0x160 Cache the module owner in dma_chan_put() before the put so the trailing module_put() does not need chan->device. | ||||
| CVE-2026-98355 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: guard against null kobj name In the client, if `init_path()` errors, the callee tries to clean up with `rtrs_clt_close_conns()`. However, this can lead to calling the event tracing code with `clt_path->kobj->name` being `NULL` and thus causing a null pointer dereference when trying to copy from it. This just adds a guard to check that the name is not `NULL` before copying from it. The server appears to have a similar pattern. | ||||
| CVE-2026-98371 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | ||||
| CVE-2026-98296 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copies skb->len bytes into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy. Oversized packets are currently rejected only in btintel_pcie_send_frame(); any future caller of btintel_pcie_send_sync() would silently overflow the DMA buffer. Add the bounds check in btintel_pcie_send_sync() itself, right before skb_push() and the DMA copy. | ||||
| CVE-2026-98302 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp] Read of size 8 at addr 0000000000000010 by task ip/302 Call Trace: <TASK> mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] netif_set_mac_address+0x1e4/0x2c0 do_setlink+0x684/0x2680 </TASK> Address 0x10 is the offset of tx_curr_get, the third pointer in struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which ResetAdapter() calls immediately afterwards, dereferences smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective hw_state test; the transmit queue merely crashes first. Both are covered by the guard below. Skip the adapter reset when the interface is down. dev_addr_set() is left unconditional, so the new address is still recorded in dev->dev_addr. Nothing is lost by not resetting the adapter here: skfp_open() deliberately re-reads the factory address on every open, read_address(smc, NULL); eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a); and the comment above it states this is done to discard exactly such an address override across a close/open cycle. An address set while the interface is down could not have survived the following open even before this change, so the guard removes no working behaviour. Guarding the hardware side of ndo_set_mac_address() with netif_running() is established practice; skge_set_mac_address() has done so since commit 2eb3e621c4e0 ("skge: set mac address bonding fix"). Guarding the reset as a whole, rather than NULL-checking the queues, is also what the rest of the driver expects. After a previous open/close the queue pointers are stale but non-NULL, so there is no crash, yet ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable Board Interrupts") while skfp_close() has already called free_irq() - the adapter would be brought back online with no handler installed. The only other ResetAdapter() caller is skfp_interrupt(), which by construction runs only while the device is open. Found by automated driver testing against an emulated SysKonnect FDDI adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires CAP_NET_ADMIN. | ||||
| CVE-2026-98314 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since substream->timer is set to the new timer just once, after a successful registration -- so the failure path stays safe. | ||||
| CVE-2026-98322 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr. | ||||
| CVE-2026-98332 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: only operate on TDLS peers in the TDLS code ieee80211_tdls_oper() can operate on the AP station, which then yields various warnings when the AP station is removed then or at a later point in time after being confused for a TDLS peer. Always check that the station is a TDLS peer. | ||||
| CVE-2026-98335 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: abort chanswitch when leaving a mesh The code in ieee80211_stop_mesh() leaves CSA active, but leaving the mesh released the channel context, so the CSA finalize work crashes: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272 Call Trace: ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093 ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.c:1147 ieee80211_mesh_finish_csa+0x131/0x210 net/mac80211/mesh.c:1542 ieee80211_set_after_csa_beacon net/mac80211/cfg.c:4085 [inline] __ieee80211_csa_finalize net/mac80211/cfg.c:4133 [inline] ieee80211_csa_finalize+0x633/0x1150 net/mac80211/cfg.c:4155 cfg80211_wiphy_work+0x2ab/0x450 net/wireless/core.c:438 Abort the channel switch properly. | ||||
| CVE-2026-98336 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't offload TC setup on AP_VLAN interfaces AP_VLAN interfaces are purely virtual, so don't try to offload TC setup to drivers. We can't really use the AP interface either since we may not know it all the time, and it could technically even change. Just reject the TC offload so things get done in software. | ||||
| CVE-2026-98347 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Avoid restoring OPER_UP after multicast flush ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to prevent multicast joins while ipoib_mcast_dev_flush() is running, and restores the flag afterwards if it was previously set. This restore races with ipoib_ib_dev_down(). If the interface is brought down while the flush is in progress, ipoib_ib_dev_down() clears IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device has already gone down. Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP being cleared to terminate its rtnl_trylock() retry loop. If the flag is left set after shutdown, the workqueue retries forever, causing teardown to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while holding RTNL. Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag. Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast joins are allowed, avoiding the race with device shutdown. | ||||
| CVE-2026-98351 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: free skb when disconnected When the simulated link is disconnected, virt_wifi_start_xmit() returns NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this return value as consumed, so every packet sent while disconnected leaks its skb. Free the skb before returning the drop status. | ||||
| CVE-2026-98356 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: check create_singlethread_workqueue() in DCB setup bnxt_re_init_dcb_wq() ignores a failed allocation. The async DCB handler later calls queue_work() on the NULL pointer. | ||||
| CVE-2026-98259 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/dax: check zero or empty entry before converting xarray entry Calling dax_to_folio() with empty entry causes kernel panic below when booting a VM with DAX enabled storage. This patch checks empty entry before calling dax_to_folio() on dax_associate_entry(), dax_disassociate_entry(), and dax_busy_page(). Commit 98c183a4fccf ("fs/dax: don't disassociate zero page entries") added guards in the associate and disassociate paths, but the guards still come after dax_to_folio(), and dax_busy_page() still has the same problem. [ 0.737679] EXT4-fs (pmem0p1): mounted filesystem 79676804-7c8b-491a-b2a6-9bae3c72af70 ro with ordered data mode. Quota mode: disabled. [ 0.737891] VFS: Mounted root (ext4 filesystem) readonly on device 259:1. [ 0.739119] devtmpfs: mounted [ 0.739476] Freeing unused kernel memory: 1920K [ 0.740156] Run /sbin/init as init process [ 0.740229] with arguments: [ 0.740286] /sbin/init [ 0.740321] with environment: [ 0.740369] HOME=/ [ 0.740400] TERM=linux [ 0.743162] Unable to handle kernel paging request at virtual address fffffdffbf000008 [ 0.743285] Mem abort info: [ 0.743316] ESR = 0x0000000096000006 [ 0.743371] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.743444] SET = 0, FnV = 0 [ 0.743489] EA = 0, S1PTW = 0 [ 0.743545] FSC = 0x06: level 2 translation fault [ 0.743610] Data abort info: [ 0.743656] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 0.743720] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.743785] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.743848] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000b9d17000 [ 0.743931] [fffffdffbf000008] pgd=10000000bfa3d403, p4d=10000000bfa3d403, pud=1000000040bfe403, pmd=0000000000000000 [ 0.744070] Internal error: Oops: 0000000096000006 [#1] SMP [ 0.748888] CPU: 0 UID: 0 PID: 1 Comm: init Not tainted 6.18.4 #1 NONE [ 0.749421] pstate: 004000c5 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.749969] pc : dax_disassociate_entry.constprop.0+0x20/0x50 [ 0.750444] lr : dax_insert_entry+0xcc/0x408 [ 0.750802] sp : ffff80008000b9e0 [ 0.751083] x29: ffff80008000b9e0 x28: 0000000000000000 x27: 0000000000000000 [ 0.751682] x26: 0000000001963d01 x25: ffff0000004f7d90 x24: 0000000000000000 [ 0.752264] x23: 0000000000000000 x22: ffff80008000bcc8 x21: 0000000000000011 [ 0.752836] x20: ffff80008000ba90 x19: 0000000001963d01 x18: 0000000000000000 [ 0.753407] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 0.753970] x14: ffffbf3154b9ae70 x13: 0000000000000000 x12: ffffbf3154b9ae70 [ 0.754548] x11: ffffffffffffffff x10: 0000000000000000 x9 : 0000000000000000 [ 0.755122] x8 : 000000000000000d x7 : 000000000000001f x6 : 0000000000000000 [ 0.755707] x5 : 0000000000000000 x4 : 0000000000000000 x3 : fffffdffc0000000 [ 0.756287] x2 : 0000000000000008 x1 : 0000000040000000 x0 : fffffdffbf000000 [ 0.756871] Call trace: [ 0.757107] dax_disassociate_entry.constprop.0+0x20/0x50 (P) [ 0.757592] dax_iomap_pte_fault+0x4fc/0x808 [ 0.757951] dax_iomap_fault+0x28/0x30 [ 0.758258] ext4_dax_huge_fault+0x80/0x2dc [ 0.758594] ext4_dax_fault+0x10/0x3c [ 0.758892] __do_fault+0x38/0x12c [ 0.759175] __handle_mm_fault+0x530/0xcf0 [ 0.759518] handle_mm_fault+0xe4/0x230 [ 0.759833] do_page_fault+0x17c/0x4dc [ 0.760144] do_translation_fault+0x30/0x38 [ 0.760483] do_mem_abort+0x40/0x8c [ 0.760771] el0_ia+0x4c/0x170 [ 0.761032] el0t_64_sync_handler+0xd8/0xdc [ 0.761371] el0t_64_sync+0x168/0x16c [ 0.761677] Code: f9453021 f2dfbfe3 cb813080 8b001860 (f9400401) [ 0.762168] ---[ end trace 0000000000000000 ]--- [ 0.762550] note: init[1] exited with irqs disabled [ 0.762631] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | ||||
| CVE-2026-98316 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix race between rawmidi and disconnect Although we tried to fix the potential UAF issues at USB disconnect on bcd2000 driver, there is still an overlooked case -- namely, when a rawmidi trigger callback has been already running at USB disconnect handling, the in-flight function (e.g. bcd2000_midi_send()) could still access the URB, because the previous URB NULL-check & clearance was considered only for the URB complete callbacks, but not about the parallel rawmidi operations. For addressing the race, this patch introduced a new spinlock that covers each rawmidi operation as well as the rawmidi handling in the complete callback. The URB is cleared with the lock, so it guarantees that the pending rawmidi task already finished or a NULL check is effective. | ||||
| CVE-2026-98372 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix stack OOB read in iptfs_skb_reset_frag_walk() iptfs_skb_reset_frag_walk() advances to the fragment containing @offset with an unbounded loop: while (offset >= walk->past + walk->frags[walk->fragi].len) walk->past += walk->frags[walk->fragi++].len; walk->fragi is advanced and walk->frags[walk->fragi] is dereferenced without ever checking fragi against walk->nr_frags. When the requested offset is at or beyond the total length spanned by the walk's fragments, fragi runs past nr_frags and off the end of the fixed-size on-stack frags[MAX_SKB_FRAGS + 1] array, reading out-of-bounds stack memory. The two callers behave differently: iptfs_skb_add_frags() already guards against this with if (!walk->nr_frags || offset >= walk->total + walk->initial_offset) return len; but iptfs_skb_can_add_frags() has no such guard and calls iptfs_skb_reset_frag_walk() unconditionally, so it performs the out-of-range walk. Its own "fragi < walk->nr_frags" bound check runs only afterwards, too late to prevent the read. This is reachable from the receive path: a crafted IP-TFS (AGGFRAG) payload delivered to an IPTFS SA drives iptfs_reassem_cont() -> iptfs_skb_can_add_frags() with an offset past the fragment total, e.g.: BUG: KASAN: stack-out-of-bounds in iptfs_skb_reset_frag_walk+0x235/0x250 Read of size 4 at addr ffff888008ad7210 by task repro/345 iptfs_skb_reset_frag_walk+0x235/0x250 net/xfrm/xfrm_iptfs.c:392 iptfs_skb_can_add_frags+0x155/0x310 net/xfrm/xfrm_iptfs.c:420 iptfs_reassem_cont+0xcf8/0x1140 net/xfrm/xfrm_iptfs.c:902 iptfs_input_ordered+0x552/0x670 net/xfrm/xfrm_iptfs.c:1280 iptfs_input+0x3d6/0xde0 net/xfrm/xfrm_iptfs.c:1741 xfrm_input+0x282f/0x6140 net/xfrm/xfrm_input.c:700 xfrm4_esp_rcv+0x93/0x120 net/ipv4/xfrm4_protocol.c:104 ip_rcv+0x278/0x2d0 net/ipv4/ip_input.c:612 Give iptfs_skb_can_add_frags() the same up-front guard that iptfs_skb_add_frags() already has, so the walk is never entered with an out-of-range offset. When it triggers, the caller falls back to the existing linearize-and-copy path, which is safe. | ||||
| CVE-2026-98240 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: initialize `options_len` before referencing options The following command triggers a kernel panic: ip link add d0 type dummy; ip link set d0 up ip route add 10.30.0.0/16 \ encap ip id 300 geneve_opts 4660:66:11223344 dev d0 memcpy: detected buffer overflow: 4 byte write of buffer size 0 kernel BUG at lib/string_helpers.c:1044! ... ip_tun_parse_opts.part.0.cold+0x10/0x10 ip_tun_build_state+0x116/0x2a0 On kernels built with GCC 15+ and `CONFIG_FORTIFY_SOURCE`, the fortified `memcpy()` got 0 sized destination with request of 4 bytes length: static int ip_tun_parse_opts_geneve(...) { ... attr = tb[LWTUNNEL_IP_OPT_GENEVE_DATA]; data_len = nla_len(attr); /* == 4 */ struct geneve_opt *opt = ip_tunnel_info_opts(info) + opts_len; memcpy(opt->opt_data, nla_data(attr), data_len); /* ^^^^^^^^^^^^^ 0 since options_len is assigned afterwards */ Fixed by initializing the counter before the options are referenced. Matching what `tunnel_key_opts_set()` already does. | ||||
| CVE-2026-98285 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix bugs caused by switchdev deletion errors Allowing switchdev to prevent vlan deletion and error out in __vlan_del could cause multiple different issues - inconsistent state, memory leaks when flushing, NULL pointer dereference on bridge error when flushing. It doesn't make sense to allow it to stop __vlan_del, so log the error and continue with software vlan deletion. This is also consistent with 8021q behaviour. | ||||
| CVE-2026-98300 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners because tcp_rcv_state_process() drops skb for TCP_CLOSE and opt_skb was freed immediately anyway. [0]: sk->sk_forward_alloc WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28 Modules linked in: CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162 Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41 RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005 RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000 R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0 Call Trace: <TASK> __sk_destruct+0x82/0xae0 net/core/sock.c:2356 rcu_do_batch kernel/rcu/tree.c:2645 [inline] rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622 run_ksoftirqd kernel/softirq.c:1076 [inline] run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068 smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160 kthread+0x396/0x4a0 kernel/kthread.c:436 ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||