Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2023-54253 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: set page extent mapped after read_folio in relocate_one_page One of the CI runs triggered the following panic assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 sp : ffff800093213720 x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000 x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880 x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028 x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000 x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8 x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_set_dirty+0x38/0xa0 btrfs_page_set_dirty+0x58/0x88 relocate_one_page+0x204/0x5f0 relocate_file_extent_cluster+0x11c/0x180 relocate_data_extent+0xd0/0xf8 relocate_block_group+0x3d0/0x4e8 btrfs_relocate_block_group+0x2d8/0x490 btrfs_relocate_chunk+0x54/0x1a8 btrfs_balance+0x7f4/0x1150 btrfs_ioctl+0x10f0/0x20b8 __arm64_sys_ioctl+0x120/0x11d8 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x158 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000) This is the same problem outlined in 17b17fcd6d44 ("btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the fix is the same. I originally looked for the same pattern elsewhere in our code, but mistakenly skipped over this code because I saw the page cache readahead before we set_page_extent_mapped, not realizing that this was only in the !page case, that we can still end up with a !uptodate page and then do the btrfs_read_folio further down. The fix here is the same as the above mentioned patch, move the set_page_extent_mapped call to after the btrfs_read_folio() block to make sure that we have the subpage blocksize stuff setup properly before using the page. | ||||
| CVE-2023-54192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block We got a kernel panic if old_addr is NULL. https://bugzilla.kernel.org/show_bug.cgi?id=217266 BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] __f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] ? vfs_write+0x2ae/0x3f0 ? vfs_write+0x2ae/0x3f0 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f69095fe53f | ||||
| CVE-2023-54235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/DOE: Fix destroy_work_on_stack() race The following debug object splat was observed in testing: ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510 WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0 ... Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: ? debug_print_object+0x7d/0xb0 ? __pfx_doe_statemachine_work+0x10/0x10 debug_object_free.part.0+0x11b/0x150 doe_statemachine_work+0x45e/0x510 process_one_work+0x1d4/0x3c0 This occurs because destroy_work_on_stack() was called after signaling the completion in the calling thread. This creates a race between destroy_work_on_stack() and the task->work struct going out of scope in pci_doe(). Signal the work complete after destroying the work struct. This is safe because signal_task_complete() is the final thing the work item does and the workqueue code is careful not to access the work struct after. | ||||
| CVE-2025-68191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: use netdev_warn() instead of netdev_WARN() netdev_WARN() uses WARN/WARN_ON to print a backtrace along with file and line information. In this case, udp_tunnel_nic_register() returning an error is just a failed operation, not a kernel bug. udp_tunnel_nic_register() can fail due to a memory allocation failure (kzalloc() or udp_tunnel_nic_alloc()). This is a normal runtime error and not a kernel bug. Replace netdev_WARN() with netdev_warn() accordingly. | ||||
| CVE-2025-21086 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.5 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. | ||||
| CVE-2025-68258 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: multiq3: sanitize config options in multiq3_attach() Syzbot identified an issue [1] in multiq3_attach() that induces a task timeout due to open() or COMEDI_DEVCONFIG ioctl operations, specifically, in the case of multiq3 driver. This problem arose when syzkaller managed to craft weird configuration options used to specify the number of channels in encoder subdevice. If a particularly great number is passed to s->n_chan in multiq3_attach() via it->options[2], then multiple calls to multiq3_encoder_reset() at the end of driver-specific attach() method will be running for minutes, thus blocking tasks and affected devices as well. While this issue is most likely not too dangerous for real-life devices, it still makes sense to sanitize configuration inputs. Enable a sensible limit on the number of encoder chips (4 chips max, each with 2 channels) to stop this behaviour from manifesting. [1] Syzbot crash: INFO: task syz.2.19:6067 blocked for more than 143 seconds. ... Call Trace: <TASK> context_switch kernel/sched/core.c:5254 [inline] __schedule+0x17c4/0x4d60 kernel/sched/core.c:6862 __schedule_loop kernel/sched/core.c:6944 [inline] schedule+0x165/0x360 kernel/sched/core.c:6959 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016 __mutex_lock_common kernel/locking/mutex.c:676 [inline] __mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760 comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868 chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414 do_dentry_open+0x953/0x13f0 fs/open.c:965 vfs_open+0x3b/0x340 fs/open.c:1097 ... | ||||
| CVE-2022-50850 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ipr: Fix WARNING in ipr_init() ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails. notifier callback ipr_halt [ipr] already registered WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29 notifier_chain_register+0x16d/0x230 Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks agpgart cfbft CPU: 3 PID: 299 Comm: modprobe Tainted: G W 6.1.0-rc1-00190-g39508d23b672-dirty #332 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:notifier_chain_register+0x16d/0x230 Call Trace: <TASK> __blocking_notifier_chain_register+0x73/0xb0 ipr_init+0x30/0x1000 [ipr] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2025-68335 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel() Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from the fact that in case of early device detach via pcl818_detach(), subdevice dev->read_subdev may not have initialized its pointer to &struct comedi_async as intended. Thus, any such dereferencing of &s->async->cmd will lead to general protection fault and kernel crash. Mitigate this problem by removing a call to pcl818_ai_cancel() from pcl818_detach() altogether. This way, if the subdevice setups its support for async commands, everything async-related will be handled via subdevice's own ->cancel() function in comedi_device_detach_locked() even before pcl818_detach(). If no support for asynchronous commands is provided, there is no need to cancel anything either. [1] Syzbot crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762 ... Call Trace: <TASK> pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115 comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207 do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline] comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] ... | ||||
| CVE-2023-54313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_get_acl_rcu() Following process: P1 P2 path_openat link_path_walk may_lookup inode_permission(rcu) ovl_permission acl_permission_check check_acl get_cached_acl_rcu ovl_get_inode_acl realinode = ovl_inode_real(ovl_inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL ovl_inode_upper upperdentry = ovl_i_dentry_upper(ovl_inode) d_inode(upperdentry) // returns NULL IS_POSIXACL(realinode) // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 205.472797] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted 6.3.0-12064-g2edfa098e750-dirty #1216 [ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300 [ 205.489584] Call Trace: [ 205.489812] <TASK> [ 205.490014] ovl_get_inode_acl+0x26/0x30 [ 205.490466] get_cached_acl_rcu+0x61/0xa0 [ 205.490908] generic_permission+0x1bf/0x4e0 [ 205.491447] ovl_permission+0x79/0x1b0 [ 205.491917] inode_permission+0x15e/0x2c0 [ 205.492425] link_path_walk+0x115/0x550 [ 205.493311] path_lookupat.isra.0+0xb2/0x200 [ 205.493803] filename_lookup+0xda/0x240 [ 205.495747] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2025-68380 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix peer HE MCS assignment In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to firmware as receive MCS while peer's receive MCS sent as transmit MCS, which goes against firmwire's definition. While connecting to a misbehaved AP that advertises 0xffff (meaning not supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff is assigned to he_mcs->rx_mcs_set field. Ext Tag: HE Capabilities [...] Supported HE-MCS and NSS Set [...] Rx and Tx MCS Maps 160 MHz [...] Tx HE-MCS Map 160 MHz: 0xffff Swap the assignment to fix this issue. As the HE rate control mask is meant to limit our own transmit MCS, it needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive MCS. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-68728 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix uninit memory after failed mi_read in mi_format_new Fix a KMSAN un-init bug found by syzkaller. ntfs_get_bh() expects a buffer from sb_getblk(), that buffer may not be uptodate. We do not bring the buffer uptodate before setting it as uptodate. If the buffer were to not be uptodate, it could mean adding a buffer with un-init data to the mi record. Attempting to load that record will trigger KMSAN. Avoid this by setting the buffer as uptodate, if it’s not already, by overwriting it. | ||||
| CVE-2025-68732 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix race in syncpt alloc/free Fix race condition between host1x_syncpt_alloc() and host1x_syncpt_put() by using kref_put_mutex() instead of kref_put() + manual mutex locking. This ensures no thread can acquire the syncpt_mutex after the refcount drops to zero but before syncpt_release acquires it. This prevents races where syncpoints could be allocated while still being cleaned up from a previous release. Remove explicit mutex locking in syncpt_release as kref_put_mutex() handles this atomically. | ||||
| CVE-2025-68733 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix bug: unprivileged task can create labels If an unprivileged task is allowed to relabel itself (/smack/relabel-self is not empty), it can freely create new labels by writing their names into own /proc/PID/attr/smack/current This occurs because do_setattr() imports the provided label in advance, before checking "relabel-self" list. This change ensures that the "relabel-self" list is checked before importing the label. | ||||
| CVE-2023-54231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix memory leak in wx_setup_rx_resources When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't release DMA buffer. Add dma_free_coherent() in the error path to release the DMA buffer. | ||||
| CVE-2025-68759 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring() In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA allocations in a loop. When an allocation fails, the previously successful allocations are not freed on exit. Fix that by jumping to err_free_rings label on error, which calls rtl8180_free_rx_ring() to free the allocations. Remove the free of rx_ring in rtl8180_init_rx_ring() error path, and set the freed priv->rx_buf entry to null, to avoid double free. | ||||
| CVE-2023-54232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. | ||||
| CVE-2023-54031 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa queue index attr to avoid such bugs. | ||||
| CVE-2023-53992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ocb: don't leave if not joined If there's no OCB state, don't ask the driver/mac80211 to leave, since that's just confusing. Since set/clear the chandef state, that's a simple check. | ||||
| CVE-2025-68322 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Avoid crash due to unaligned access in unwinder Guenter Roeck reported this kernel crash on his emulated B160L machine: Starting network: udhcpc: started, v1.36.1 Backtrace: [<104320d4>] unwind_once+0x1c/0x5c [<10434a00>] walk_stackframe.isra.0+0x74/0xb8 [<10434a6c>] arch_stack_walk+0x28/0x38 [<104e5efc>] stack_trace_save+0x48/0x5c [<105d1bdc>] set_track_prepare+0x44/0x6c [<105d9c80>] ___slab_alloc+0xfc4/0x1024 [<105d9d38>] __slab_alloc.isra.0+0x58/0x90 [<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0 [<105b8e54>] __anon_vma_prepare+0x60/0x280 [<105a823c>] __vmf_anon_prepare+0x68/0x94 [<105a8b34>] do_wp_page+0x8cc/0xf10 [<105aad88>] handle_mm_fault+0x6c0/0xf08 [<10425568>] do_page_fault+0x110/0x440 [<10427938>] handle_interruption+0x184/0x748 [<11178398>] schedule+0x4c/0x190 BUG: spinlock recursion on CPU#0, ifconfig/2420 lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0 While creating the stack trace, the unwinder uses the stack pointer to guess the previous frame to read the previous stack pointer from memory. The crash happens, because the unwinder tries to read from unaligned memory and as such triggers the unalignment trap handler which then leads to the spinlock recursion and finally to a deadlock. Fix it by checking the alignment before accessing the memory. | ||||