Export limit exceeded: 29169 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26198 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50582 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Prevent integer underflow By using a ratio of delay to poll_enabled_time that is not integer time_remaining underflows and does not exit the loop as expected. As delay could be derived from DT and poll_enabled_time is defined in the driver this can easily happen. Use a signed iterator to make sure that the loop exits once the remaining time is negative. | ||||
| CVE-2016-20022 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 8.4 High |
| In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. | ||||
| CVE-2023-54180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. | ||||
| CVE-2018-25117 | 2 Linux, Vestacp | 2 Linux, Control Panel | 2026-04-15 | N/A |
| VestaCP commit a3f0fa1 (2018-05-31) up to commit ee03eff (2018-06-13) contain embedded malicious code that resulted in a supply-chain compromise. New installations created from the compromised installer since at least May 2018 were subject to installation of Linux/ChachaDDoS, a multi-stage DDoS bot that uses Lua for second- and third-stage components. The compromise leaked administrative credentials (base64-encoded admin password and server domain) to an external URL during installation and/or resulted in the installer dropping and executing a DDoS malware payload under local system privileges. Compromised servers were subsequently observed participating in large-scale DDoS activity. Vesta acknowledged exploitation in the wild in October 2018. | ||||
| CVE-2025-40335 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq input args This will help on validating the userq input args, and rejecting for the invalid userq request at the IOCTLs first place. | ||||
| CVE-2025-68762 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: initialize work queue before error checks Prevent a kernel warning when netconsole setup fails on devices with IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in __flush_work) occurs because the cleanup path tries to cancel an uninitialized work queue. When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL, it fails early and calls skb_pool_flush() for cleanup. This function calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been initialized yet, triggering the warning. Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the work queue is properly initialized before any potential failure points. This allows the cleanup path to safely cancel the work queue regardless of where the setup fails. | ||||
| CVE-2025-68752 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. The fix is similar to commit 329d050bbe63 ("gve: Implement settime64 with -EOPNOTSUPP"). | ||||
| CVE-2025-40299 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement gettimex64 with -EOPNOTSUPP gve implemented a ptp_clock for sole use of do_aux_work at this time. ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has implemented either gettimex64 or gettime64. Stub gettimex64 and return -EOPNOTSUPP to prevent NULL dereferencing. | ||||
| CVE-2025-40312 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Verify inode mode when loading from disk The inode mode loaded from corrupted disk can be invalid. Do like what commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk") does. | ||||
| CVE-2025-40298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. | ||||
| CVE-2025-40293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Don't overflow during division for dirty tracking If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow to 0 and this triggers divide by 0. In this case the index should just be 0, so reorganize things to divide by shift and avoid hitting any overflows. | ||||
| CVE-2025-40210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" I've found that pynfs COMP6 now leaves the connection or lease in a strange state, which causes CLOSE9 to hang indefinitely. I've dug into it a little, but I haven't been able to root-cause it yet. However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"). Tianshuo Han also reports a potential vulnerability when decoding an NFSv4 COMPOUND. An attacker can place an arbitrarily large op count in the COMPOUND header, which results in: [ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 when NFSD attempts to allocate the COMPOUND op array. Let's restore the operation-per-COMPOUND limit, but increased to 200 for now. | ||||
| CVE-2021-47744 | 2 Cypress, Linux | 3 Ctm-200, Ctm-one, Linux | 2026-04-15 | 7.5 High |
| Cypress Solutions CTM-200/CTM-ONE 1.3.6 contains hard-coded credentials vulnerability in Linux distribution that exposes root access. Attackers can exploit the static 'Chameleon' password to gain remote root access via Telnet or SSH on affected devices. | ||||
| CVE-2025-40330 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Shutdown FW DMA in bnxt_shutdown() The netif_close() call in bnxt_shutdown() only stops packet DMA. There may be FW DMA for trace logging (recently added) that will continue. If we kexec to a new kernel, the DMA will corrupt memory in the new kernel. Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW. This will stop the FW DMA. In case the call fails, call pcie_flr() to reset the function and stop the DMA. | ||||
| CVE-2025-68215 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP cleanup on driver removal in error path Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] <TASK> [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded | ||||
| CVE-2022-50677 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: fix use after free in _ipmi_destroy_user() The intf_free() function frees the "intf" pointer so we cannot dereference it again on the next line. | ||||
| CVE-2025-40339 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved. | ||||
| CVE-2025-68344 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: wavefront: Fix integer overflow in sample size validation The wavefront_send_sample() function has an integer overflow issue when validating sample size. The header->size field is u32 but gets cast to int for comparison with dev->freemem Fix by using unsigned comparison to avoid integer overflow. | ||||
| CVE-2025-68343 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing header The driver expects to receive a struct gs_host_frame in gs_usb_receive_bulk_callback(). Use struct_group to describe the header of the struct gs_host_frame and check that we have at least received the header before accessing any members of it. To resubmit the URB, do not dereference the pointer chain "dev->parent->hf_size_rx" but use "parent->hf_size_rx" instead. Since "urb->context" contains "parent", it is always defined, while "dev" is not defined if the URB it too short. | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||