Export limit exceeded: 409360 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409360 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72334 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix malformed ISO_END/CONT handling Core specification (Part C vol 4 sec 5.4.5) does not exclude empty ISO_CONT, ISO_END packets. We currently reject them if they are last. If controller sends malformed sequence ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends too long ISO_END, we panic on skb_put. If controller sends too short ISO_END we accept it. Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check skb->len properly before skb_put. Combine the ISO_CONT/END code paths as they require the same initial checks. Reject too short ISO_END packets. | ||||
| CVE-2026-72330 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | ||||
| CVE-2026-72329 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | ||||
| CVE-2026-72312 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix VF bringup affecting PF promiscuous state Mbox handling of nix_set_rx_mode for a VF with promiscuous and all_multi flags set to false causes deletion of the PF's promiscuous and allmulti MCAM rules. This occurs because the APIs that enable/disable these rules operate only on the PF, even when the mbox request is made via a VF interface. Guard both rvu_npc_enable_allmulti_entry() and rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so that a VF bringing up or tearing down its interface cannot inadvertently clear the PF's MCAM rules. | ||||
| CVE-2026-72310 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. | ||||
| CVE-2026-72302 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations. | ||||
| CVE-2026-72284 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs Ignore KVM's internal "service pending PV EOI" request if the vCPU has disabled PV EOIs since the request was made. Asserting that PV EOIs are enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e. if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables PV EOIs. kernel BUG at arch/x86/kvm/lapic.c:3338! Oops: invalid opcode: 0000 [#1] SMP CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0xb40 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-72280 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Drop bogus WARN for write to ZCR_EL2 It is entirely possible for a guest to write to the ZCR_EL2 sysreg alias while in a nested context, as it is expected if FEAT_NV2 is advertised to the L1 hypervisor. Get rid of the bogus WARN which, since the hyp vectors were installed at this point, has the effect of a hyp_panic... | ||||
| CVE-2026-72262 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get The ipc_control_data buffer is allocated as kzalloc(max_size), where max_size covers the entire struct sof_ipc_ctrl_data including its flexible array payload. However, the bounds checks in bytes_ext_put and _bytes_ext_get compared user data lengths against max_size directly, ignoring that cdata->data sits at an offset of sizeof(struct sof_ipc_ctrl_data) bytes into the allocation. This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past the end of the heap buffer from unprivileged userspace via the ALSA TLV kcontrol interface, and similarly allowed over-reading adjacent heap data on the get path. Fix all bounds checks to subtract sizeof(*cdata) from max_size so they reflect the actual space available at the cdata->data offset. Also fix the error-path restore in bytes_ext_put which wrote to cdata->data instead of cdata, causing the same overflow. | ||||
| CVE-2026-72261 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Validate size in snd_sof_update_control In snd_sof_update_control(), firmware-provided cdata->num_elems is checked against local_cdata->data->size but never against the actual allocation size. If local_cdata->data->size was previously set to an inconsistent value, the memcpy could write past the allocated buffer. Add a bounds check to ensure num_elems fits within the available space in the ipc_control_data allocation before copying. | ||||
| CVE-2026-72255 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst The br_netfilter fake rtable is embedded in struct net_bridge and is attached to bridged packets with skb_dst_set_noref(). If such a packet is queued to NFQUEUE, __nf_queue() upgrades that fake dst with skb_dst_force(). At that point the queued skb can hold a real dst reference after bridge teardown has started. The problem is not that every bridged packet needs its own dst reference. The problem is that NFQUEUE can keep the bridge private fake dst alive after unregister begins. Fix this by keeping the bridge fake dst model unchanged and pinning the bridge master device only while the packet sits in NFQUEUE. Record the bridge device in nf_queue_entry when the queued skb carries a bridge fake dst, take a device reference for the queue lifetime, and drop it when the queue entry is freed. Also make sure queued entries are reaped when that bridge device goes down, and drop the redundant nf_bridge_info_exists() test from the fake dst detection. This keeps netdev_priv(br->dev) alive until verdict completion, so the embedded fake rtable and its metrics backing storage cannot be freed out from under dst_release(). It also avoids the constant refcount bump and avoids using ipv4-specific dst helpers for IPv6 bridge traffic. | ||||
| CVE-2026-72254 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: reject fib expression on the netdev egress hook A fib expression in a netdev egress base chain dereferences nft_in(pkt), NULL on the transmit path, causing a NULL pointer dereference at eval. nft_fib_validate() masks the hook with NF_INET_* values, but netdev hook numbers are a separate enum that aliases them (NF_NETDEV_EGRESS == NF_INET_LOCAL_IN), so an egress chain passes validation and then faults. Add nft_fib_netdev_validate() that limits each result/flag to the netdev hook where the device it reads exists: the input-device cases (OIF, OIFNAME, ADDRTYPE with F_IIF) to ingress, the output-device case (ADDRTYPE with F_OIF) to egress, ADDRTYPE with no device flag to both. Also restrict nft_fib_validate() to NFPROTO_IPV4/IPV6/INET so its NF_INET_* masks are not applied to another family's hooks. | ||||
| CVE-2026-72253 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: validate skb_dst() before accessing it tc ingress and openvswitch do not guarantee routing information to be available. These subsystems use the conntrack helper infrastructure, and the SIP helper relies on the skb_dst() to be present if sip_external_media is set to 1 (which is disabled by default as a module parameter). This effectively disables the sip_external_media toggle for these subsystems without resulting in a crash. | ||||
| CVE-2026-72251 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: reload possible stale data pointer quoting sashiko: ------------------------------------------------------------------------ [..] noticed a potential memory bug and header corruption involving the SIP NAT helper. In net/netfilter/nf_nat_sip.c:nf_nat_sip(): if (skb_ensure_writable(skb, skb->len)) { nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, 0, 0, NULL, 0)) { If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the old data buffer is freed. However, nf_nat_sip() fails to update *dptr to point to the new buffer. It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP packet, which would overwrite the sequence number with a checksum update. ------------------------------------------------------------------------ nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen. But clones are possible, so rebuild dptr. Disable nf_nat_mangle_udp_packet() branch for TCP streams. It doesn't look like this can ever happen, else we should have received bug reports about this, so just check the conntrack is UDP and drop otherwise. The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages, so I don't think this is ever expected to be true for a TCP stream. | ||||
| CVE-2026-72250 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here. | ||||
| CVE-2026-72235 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: retrieve ethhdr after potential skb realloc on RX pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the VLAN header but missed for the ethernet header which is later used for the TT and AP isolation handling. | ||||
| CVE-2026-72225 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit() jbd2_journal_initialize_fast_commit() validates journal capacity by checking (journal->j_last - num_fc_blks < JBD2_MIN_JOURNAL_BLOCKS). Both j_last and num_fc_blks are unsigned, so when num_fc_blks exceeds j_last the subtraction wraps to a large value, bypassing the bounds check. The resulting underflow corrupts j_last, j_fc_first, and j_free, leading to journal abort. Fix by checking num_fc_blks against j_last before the subtraction, returning -EFSCORRUPTED. | ||||
| CVE-2026-72222 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin svc_xprt across the asynchronous TLS handshake callback svc_tcp_handshake() stores the raw svc_xprt pointer in tls_handshake_args.ta_data and submits the request through tls_server_hello_x509(). The handshake core takes only sock_hold(req->hr_sk); nothing references the embedding struct svc_sock that svc_tcp_handshake_done() reaches via container_of(). Two close races leave the in-flight callback writing through a freed svc_sock. svc_sock_free() calls tls_handshake_cancel() and discards its return value: a false return means handshake_complete() has already set HANDSHAKE_F_REQ_COMPLETED but hp_done() may not have finished, yet svc_sock_free() proceeds to kfree(svsk). The cancel-loser fall-through inside svc_tcp_handshake() itself produces the same window: when wait_for_completion_interruptible_timeout() returns <= 0 (timeout or signal) and tls_handshake_cancel() returns false, the function does not drain, returns, and svc_handle_xprt() calls svc_xprt_received(), which clears XPT_BUSY and can drop the last reference. A concurrent close then runs svc_sock_free() while svc_tcp_handshake_done() is still updating xpt_flags and walking svsk->sk_handshake_done. The corruption surfaces as set_bit/clear_bit RMW into the freed xpt_flags slab slot and as complete_all() walking and writing the freed wait_queue_head_t list embedded in sk_handshake_done -- a slab-corruption primitive, not a benign read. The path is reachable on any TLS-enabled NFS server whenever a connection close overlaps the tlshd downcall delivery window; the interruptible wait means signal delivery suffices, not just SVC_HANDSHAKE_TO expiry. Take svc_xprt_get(xprt) immediately before tls_server_hello_x509() so the in-flight callback owns its own reference. Release it on the two edges where the callback is guaranteed not to fire -- submission failure from tls_server_hello_x509() and a successful tls_handshake_cancel() -- and at the tail of svc_tcp_handshake_done() after complete_all(). [cel: rewrote commit message to describe the actual change] | ||||
| CVE-2026-72221 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: wait for in-flight TLS handshake callback when cancel loses race When wait_for_completion_interruptible_timeout() in svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and tls_handshake_cancel() then returns false, handshake_complete() has won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and is about to invoke svc_tcp_handshake_done(), but the callback's side effects on xpt_flags and on svsk->sk_handshake_done have not yet committed. The current code reads xpt_flags immediately to decide whether the session succeeded. Two races result. If the callback has executed set_bit(XPT_TLS_SESSION) but not yet clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session, enqueues the transport, and returns. svc_xprt_received() then clears XPT_BUSY, a worker thread picks the transport up, the dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set, and xpo_handshake is invoked a second time. That svc_tcp_handshake() calls init_completion(&svsk->sk_handshake_done) while the original callback concurrently calls complete_all() on it, corrupting the embedded swait_queue. If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet entered svc_tcp_handshake_done(), svc_tcp_handshake() reads XPT_TLS_SESSION as clear and tears the connection down even though the handshake is about to succeed. Wait for the callback to commit before inspecting xpt_flags. The completion is guaranteed to fire because handshake_complete() invokes svc_tcp_handshake_done() unconditionally once it has set HANDSHAKE_F_REQ_COMPLETED. | ||||
| CVE-2026-72213 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd and non-rsvd hugetlb cgroup charges. When map_chg is set, hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg with the non-rsvd cgroup pointer. As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong (non-rsvd) cgroup pointer into the folio's rsvd slot. When the folio is later freed, free_huge_folio() unconditionally calls both hugetlb_cgroup_uncharge_folio() and hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the wrong cgroup from the folio and decrements a counter that was never charged for that cgroup, causing a page_counter underflow: page_counter underflow: -512 nr_pages=512 WARNING: mm/page_counter.c:61 at page_counter_cancel Fix this by introducing a separate h_cg_rsvd pointer exclusively for the rsvd charge path, keeping the rsvd and non-rsvd charges fully independent through their charge, commit, and error uncharge paths. | ||||