Export limit exceeded: 408716 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408716 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408716 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74367 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74338 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | ||||
| CVE-2026-74336 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end) and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read *ptr), so it can read up to two bytes beyond the TIM element -- an out-of-bounds read of adjacent skb/heap data when the TIM is the last element in the frame. The +2 appears to account for the element id/len header, but tim already points past that header at the element payload, so the addend is wrong. Pass the correct element end, (const u8 *)tim + tim_len. | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-74307 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not belong to the same superblock as the original file. Currently, this validation is performed inside ext4_move_extents() by mext_check_validity(), but only after lock_two_nondirectories() has already acquired the inode locks. When the donor fd refers to a file on a different filesystem (e.g., overlayfs), this late validation creates a circular lock dependency: CPU0 (overlayfs write) CPU1 (ext4 ioctl) ---- ---- inode_lock(ovl_inode) mnt_want_write_file(filp) sb_start_write(ext4_sb) [sb_writers] backing_file_write_iter() vfs_iter_write(real_file) file_start_write(real_file) sb_start_write(ext4_sb) [blocked by freeze] lock_two_nondirectories() inode_lock(ovl_inode) [blocked] With a concurrent freeze operation holding sb_writers write side, this forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock. Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files, it fundamentally requires both files to reside on the same ext4 filesystem. Moving the superblock check before any lock acquisition is both semantically correct and eliminates the circular dependency by ensuring that cross-filesystem donor fds are rejected before sb_writers or inode locks are taken. | ||||
| CVE-2026-74277 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length of the current scatterlist segment `s` is incorrectly assigned from the head entry `sg->length` instead of the current entry `s->length`. This typo causes all P2PDMA segments in the scatterlist to inherit the length of the first segment, leading to corrupted DMA lengths for multi- segment scatterlists. Fix this by using `s->length` instead of `sg->length`. | ||||
| CVE-2026-74273 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Block region delete during region creation Expand the range lock, rename it "regions_lock", to disable region deletion in the critical period between construct_region() and attach_target(), as well as the period between device_add() and registering the remove actions. Otherwise, userspace can confuse the kernel. It can violate the assumption the region stays registered through the completion of cxl_add_to_region(). It can violate the assumption that devm_add_action_or_reset() is working with a live 'struct cxl_region'. It is ok for the region to disappear outside of those windows as that mirrors device hotplug flows where the proper locks are held. | ||||
| CVE-2026-74260 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers. This patch also disables BH when transmitting the skb to address a possible migration to different CPU leading to imbalanced decrementation of the recursion counters. This is modeled after Florian Westphal's dev_xmit_recursion*() API available since commit 97cdcf37b57e ("net: place xmit recursion in softnet data") according to its current state in the tree. | ||||
| CVE-2026-72499 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq. | ||||
| CVE-2026-72497 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a max slot check for SQ The variable WQE mode must be validated against the maximum slots supported by HW. The max supported value is 64K. Adding a max and min check and fail if user supplied value is more than the max supported and zero. | ||||
| CVE-2026-72493 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped). | ||||
| CVE-2026-72477 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: call _ntfs_bad_inode() when failing to rename It is safe to call _ntfs_bad_inode on live inodes since: commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.") The WARN_ON was added when it wasn't safe by: commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails") Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further operations on the inconsistent inode. | ||||
| CVE-2026-72454 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are enabled or disabled, so that it always reflects the set of devices allowed to generate IBIs. Also update when IBIs are freed, to cover the corner case when an IBI is freed without first being disabled (e.g. oldedev in i3c_master_add_i3c_dev_locked()). Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new array, and add a lockdep assertion to enforce that hci->lock is held by callers. Demote a message in PIO and DMA IBI handling, from an error to a debug message, because there is a race window when the condition can arise normally. | ||||
| CVE-2026-72440 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix writes_pending and barrier reference leaks on write failures raid1_make_request() acquires a writes_pending reference with md_write_start() before calling raid1_write_request(). Several failure paths in raid1_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid1_write_request() return a status indicating whether the write request was successfully queued. This allows raid1_make_request() to call md_write_end() when raid1_write_request() fails. Additionally, if wait_blocked_rdev() fails after wait_barrier() succeeds, the associated barrier reference is not released. Call allow_barrier() before returning from that path to keep the barrier accounting balanced. | ||||
| CVE-2026-72439 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending leak on write request failures raid10_make_request() acquires a writes_pending reference with md_write_start() before dispatching write requests. Several failure paths in raid10_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid10_write_request() return a status indicating whether the write request was successfully queued. This allows raid10_make_request() to release the writes_pending reference with md_write_end() when a write request fails. | ||||
| CVE-2026-72423 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard conntrack opts error writes The conntrack lookup and allocation kfuncs take an opts pointer together with an opts__sz argument. The verifier checks only the memory range described by opts__sz, but the wrappers unconditionally write opts->error whenever the internal lookup or allocation helper returns an error. For an invalid size smaller than the end of opts->error, that write can land outside the verifier-checked range. Keep returning NULL for invalid arguments, but only report the error through opts->error when the supplied size includes the field. This preserves error reporting for the supported 12-byte and 16-byte layouts, and for other invalid sizes that still include opts->error. | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72388 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock Since dma_fence objects can be shared with other subsystems, they may be accessed from hardirq context in those drivers, and we have to take that into account by also using the IRQ-safe variant when acquiring the lock. While at it, switch to the guard model. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||