Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409268 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43406 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header. | ||||
| CVE-2026-43405 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL. | ||||
| CVE-2026-43402 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting the pid's rcu.func pointer. Instead of patching free_kthread_struct() to handle the missed cleanup, consolidate all kthread exit paths. Turn kthread_exit() into a macro that calls do_exit() and add kthread_do_exit() which is called from do_exit() for any task with PF_KTHREAD set. This guarantees that kthread-specific cleanup always happens regardless of the exit path - make_task_dead(), direct do_exit(), or kthread_exit(). Replace __to_kthread() with a new tsk_is_kthread() accessor in the public header. Export do_exit() since module code using the kthread_exit() macro now needs it directly. | ||||
| CVE-2026-43383 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this. | ||||
| CVE-2026-43374 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed. | ||||
| CVE-2026-43370 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618) | ||||
| CVE-2026-43368 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] <TASK> [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60) | ||||
| CVE-2026-43366 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks. | ||||
| CVE-2026-43365 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport. | ||||
| CVE-2026-43362 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption. | ||||
| CVE-2026-43350 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: require a full NFS mode SID before reading mode bits parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS mode SID and reads sid.sub_auth[2] to recover the mode bits. That assumes the ACE carries three subauthorities, but compare_sids() only compares min(a, b) subauthorities. A malicious server can return an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still matches sid_unix_NFS_mode and then drives the sub_auth[2] read four bytes past the end of the ACE. Require num_subauth >= 3 before treating the ACE as an NFS mode SID. This keeps the fix local to the special-SID mode path without changing compare_sids() semantics for the rest of cifsacl. | ||||
| CVE-2026-43341 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length. | ||||
| CVE-2026-43339 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection. | ||||
| CVE-2026-43334 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned. | ||||
| CVE-2026-43332 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path. | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43321 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Properly mark live registers for indirect jumps For a `gotox rX` instruction the rX register should be marked as used in the compute_insn_live_regs() function. Fix this. | ||||
| CVE-2026-43304 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: define and enforce CEPH_MAX_KEY_LEN When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway. | ||||
| CVE-2026-43303 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several subsystems (slub, shmem, ttm, etc.) use page->private but don't clear it before freeing pages. When these pages are later allocated as high-order pages and split via split_page(), tail pages retain stale page->private values. This causes a use-after-free in the swap subsystem. The swap code uses page->private to track swap count continuations, assuming freshly allocated pages have page->private == 0. When stale values are present, swap_count_continued() incorrectly assumes the continuation list is valid and iterates over uninitialized page->lru containing LIST_POISON values, causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860 Fix this by clearing page->private in free_pages_prepare(), ensuring all freed pages have clean state regardless of previous use. | ||||
| CVE-2026-43280 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise When user provides a bogus pat_index value through the madvise IOCTL, the xe_pat_index_get_coh_mode() function performs an array access without validating bounds. This allows a malicious user to trigger an out-of-bounds kernel read from the xe->pat.table array. The vulnerability exists because the validation in madvise_args_are_sane() directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without first checking if pat_index is within [0, xe->pat.n_entries). Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug builds, it still performs the unsafe array access in production kernels. v2(Matthew Auld) - Using array_index_nospec() to mitigate spectre attacks when the value is used v3(Matthew Auld) - Put the declarations at the start of the block (cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29) | ||||