Export limit exceeded: 404439 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25229 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25229 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93264 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk and is propagated to the device, causing the device to see the chunk as empty and reject the memory registration. Fix the calculation so it will be performed only if the number of pages isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in the above loop correctly. Also prevent out-of-bounds reach in the chunks array in such scenario. | ||||
| CVE-2026-93270 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for 'dst_reg = src_reg + <percpu_base_off>'. However, the interpreter ignores the 'off' at its ALU64_MOV_X label. The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when the interpreter loads memory from the register, it will hit a page fault. [ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034 [ 2.546485] #PF: supervisor read access in kernel mode [ 2.547167] #PF: error_code(0x0000) - not-present page [ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062 [ 2.548912] Oops: Oops: 0000 [#1] SMP PTI Set jit_required as true in order to disallow interpreter fallback in core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is patched to the prog. BTW, rename the helper bpf_map_supports_cpu_flags() to bpf_map_is_percpu_map(). | ||||
| CVE-2026-93261 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Fix NULL pointer dereference in __lock_set_class() register_lock_class() can return NULL when the lock class pool is exhausted, graph_lock() fails, or key validation fails. However, __lock_set_class() uses the return value directly in pointer arithmetic without a NULL check: class = register_lock_class(lock, subclass, 0); hlock->class_idx = class - lock_classes; If class is NULL, this computes a wild offset that corrupts hlock->class_idx. The subsequent reacquire_held_locks() call will invoke hlock_class() with this corrupted index, leading to a NULL or out-of-bounds pointer dereference. Add the missing NULL check, consistent with how __lock_acquire() already handles this case at the same call site. | ||||
| CVE-2026-93266 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: RSI: fix field-spanning write warning in attestation token init The challenge is passed in registers a1 through a8. However, copying to ®s.a1 makes FORTIFY treat the destination as the single a1 field, resulting in a field-spanning write warning. [1] Overlay the SMCCC register structure with an RSI-specific argument layout and copy the challenge into an explicit 64-byte array. This keeps the existing a1-a8 argument encoding while giving the copy a correctly sized destination object. [1] memcpy: detected field-spanning write (size 64) of single field "®s.a1" at ./arch/arm64/include/asm/rsi_cmds.h:119 (size 8) WARNING: ./arch/arm64/include/asm/rsi_cmds.h:119 at rsi_attestation_token_init+0xdc/0xf8 [arm_cca_guest], CPU#0: cat/3314 | ||||
| CVE-2026-93263 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: eswin: Zero-initialize stack-allocated clk_init_data eswin_clk_register_pll() and eswin_register_clkdiv() declare a struct clk_init_data on the stack and only initialize some of its fields (parent_data respectively parent_hws). clk_core_populate_parent_map() checks parent_names first and parent_data second before falling back to parent_hws, so leftover stack garbage in the uninitialized fields hijacks parent resolution and the clk core dereferences a bogus pointer: Unable to handle kernel NULL pointer dereference at virtual address 000000000000000c Oops [#1] epc : __clk_register+0x31a/0x7f0 [<ffffffff805dc774>] __clk_register+0x31a/0x7f0 [<ffffffff805dcd76>] devm_clk_hw_register+0x2a/0x94 [<ffffffff805e319a>] eswin_register_clkdiv+0x80/0xd0 [<ffffffff805e34a0>] eswin_clk_register_clks+0x162/0x1a0 [<ffffffff805e3736>] eic7700_clk_probe+0x146/0x180 [<ffffffff8065d23c>] platform_probe+0x3c/0x7a Observed on EIC7700 hardware (with the driver backported to a 6.17 tree); whether the bug triggers depends entirely on what the stack happens to contain when the registration helpers run. Zero-initialize both structures. | ||||
| CVE-2018-15982 | 6 Adobe, Apple, Google and 3 more | 12 Flash Player, Flash Player Installer, Mac Os X and 9 more | 2026-10-01 | 7.8 High |
| Flash Player versions 31.0.0.153 and earlier, and 31.0.0.108 and earlier have a use after free vulnerability. Successful exploitation could lead to arbitrary code execution. | ||||
| CVE-2022-30333 | 4 Debian, Linux, Opengroup and 1 more | 4 Debian Linux, Linux Kernel, Unix and 1 more | 2026-10-01 | 9.8 Critical |
| RARLAB UnRAR before 6.12 on Linux and UNIX allows directory traversal to write to files during an extract (aka unpack) operation, as demonstrated by creating a ~/.ssh/authorized_keys file. NOTE: WinRAR and Android RAR are unaffected. | ||||
| CVE-2026-93267 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in uverbs_free_dmah() When accessing a dmah via the netlink path the only synchronization mechanism for the said dmah is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of uverbs_free_dmah(), which is too late, since by that point vendor-specific resources associated with the dmah might already be freed. This can leave a short window where the dmah remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of uverbs_free_dmah(), ensuring that the dmah is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a dmah that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-93283 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix device_register() error path When device_register() fails in i3c_master_register_new_i3c_devs(), put_device() is called to drop the reference taken by device_register(). That drops the last reference, so the device's release callback i3c_device_release() runs and frees the i3c_device. Two problems follow from that: i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because desc->dev->desc still points back at the descriptor. Clear it before calling put_device(). After put_device() frees the i3c_device, desc->dev is left pointing at freed memory, so clear desc->dev as well. That prevents, for example, i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and dereferencing it. | ||||
| CVE-2026-93809 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: flush pending RCU callbacks on module unload Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks before freeing module text, preventing late callback execution in freed memory. BUG: unable to handle page fault for address: ffffffffc1d59c40 PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0 Oops: 0010 [#1] SMP NOPTI RIP: 0010:0xffffffffc1d59c40 Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16. RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286 RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590 RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290 RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100 R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700 R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? rcu_do_batch+0x163/0x450 ? rcu_core+0x177/0x1c0 ? __do_softirq+0xc1/0x280 ? asm_call_irq_on_stack+0xf/0x20 </IRQ> ? do_softirq_own_stack+0x37/0x50 ? irq_exit_rcu+0xc4/0x100 ? sysvec_apic_timer_interrupt+0x36/0x80 ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? cpuidle_enter_state+0xd4/0x360 ? cpuidle_enter+0x29/0x40 ? cpuidle_idle_call+0x108/0x1a0 ? do_idle+0x77/0xf0 ? cpu_startup_entry+0x19/0x20 ? secondary_startup_64_no_verify+0xbf/0xcb (cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) | ||||
| CVE-2026-93278 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown cvm_oct_rx_shutdown calls free_irq and netif_napi_del without disabling the napi instance first. As the free_irq only waits for completion of hard interrupt handlers, the napi poll function could still be active. If cvm_oct_remove proceeds to free the plat structure (which holds the NAPI instances), the active poll function will access freed memory, resulting in a use-after-free crash. | ||||
| CVE-2026-93281 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix HE extended capability length check rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability byte 10, but rejects only datalen values below 10. Byte 10 requires at least 11 bytes. Require datalen >= 11 before reading data[10]. | ||||
| CVE-2026-93271 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate ath11k can receive HT/VHT/HE frames whose reported MCS is above the maximum that can be expressed in the corresponding mac80211 rate space (e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11). The frame itself is valid and decodes correctly, but for such a frame ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches mac80211 it trips the rate sanity check and the frame is dropped with a splat: ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12 WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211] Dropping the frame would discard otherwise valid data, so instead cap the reported MCS to the maximum the rate space can express and deliver the frame. Set rx_status->encoding before the range check and assign rate_idx from the capped value, so a frame with an out-of-range MCS no longer leaves partial or bogus rate metadata behind. Also downgrade the logging level since they are not treated as invalid frames now. The only loss is that such a frame is reported as the capped MCS in the rx rate statistics. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93273 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594: Fix device node reference leaks in multiphase loop In tps6594_regulator_probe(), the multi-phase configuration loop calls of_find_node_by_name() to find buck nodes by name, and of_get_parent() twice to navigate to the PMIC parent node. None of the acquired node references (np, intermediate parent, np_pmic_parent) are ever released via of_node_put(), causing a reference leak on every loop iteration. Additionally, of_find_node_by_name() can return NULL, but the result was immediately passed to of_node_full_name() and of_get_parent() without a NULL check, which could lead to a NULL pointer dereference. Fix this by: - Adding a NULL check for np after of_find_node_by_name() - Storing the intermediate parent node in a local variable np_parent - Calling of_node_put() on np, np_parent and np_pmic_parent at the end of each loop iteration | ||||
| CVE-2026-93275 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix stop/start with no update If pt_event_stop() is called without PERF_EF_UPDATE flag, then perf_aux_output_end() is not called. A subsequent call to pt_event_start() will call perf_aux_output_begin() again which violates the rule against nesting and triggers a WARNING in perf_aux_output_begin(). Originally, pt_event_stop() was never called without PERF_EF_UPDATE, because the only code paths to do so are from event overflow, and Intel PT does not do that. However the introduction of group throttling by commit 9734e25fbf5ae ("perf: Fix the throttle logic for a group") meant that an Intel PT event could be throttled if it was part of a group. Throttling calls PMU ->stop() / ->start() callbacks without flags. An example is when AUX area sampling is used. The following commands hit the issue: echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \ -- bash -c 'for i in `seq 1 100000` ; do true ; done' Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit indicates that an AUX output context is still open. Amend pt_event_start() / pt_event_stop() accordingly so that begin/end stay balanced: - In non-snapshot mode, stop() always closes the buffer (the buffer may have run out of space, and that accounting is done by the update), so a following start() opens a fresh one as before. - In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the buffer open so that pt_event_snapshot_aux() can still copy from it, and start() then only re-enables tracing instead of calling perf_aux_output_begin() again. Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set (as is required by the documentation), so a final call to perf_aux_output_end() is assured. | ||||
| CVE-2026-93796 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-01 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: null RX pointers after free When iwl_pcie_tx_init() fails after RX init, nic init unwinds via iwl_pcie_rx_free(). The freed RX members stayed non-NULL on the live transport object, so later teardown or retry could touch stale RX state. Set rx_pool, global_table, rxq, and alloc_page to NULL after free to make repeated cleanup and retry paths safe. | ||||
| CVE-2026-93817 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix addr_filter_ranges lifetime Lee Jia Jie reported that since event::addr_filter_ranges is used under RCU, it should be RCU freed. | ||||
| CVE-2026-93804 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: ibss: wait for in-flight TX on disconnect While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes stations, turns the carrier off and immediately tells the driver to leave as well. While there may be synchronize_net() in station flush and in this code later, packets can still be transmitted due to cross-CPU race conditions after carrier off is set. Therefore, it's possible for a race to happen where a TX to the driver occurs while or after telling it to leave the IBSS. This can be confusing to drivers, and in the case of iwlwifi leads to an attempt to use invalid queues. Move netif_carrier_off() to occur before sta_info_flush() during IBSS disconnect, and add synchronize_net() if flushing didn't, so that the synchronize_net() always happens between turning the carrier off and telling the driver, avoiding this race. | ||||
| CVE-2026-93828 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix handling of damaged volume in exfat_create_upcase_table() When the size of the upcase table is set to zero in the dentry for any reason(e.g. corrupted media or misbehaving device), an integer overflow causes the module to loop indefinitely. If the size of the upcase table is read zero, do not attempt to load the table. Instead, fallback to loading the default upcase table. If the size of the upcase table is zero or no upcase table is found, raise exfat_fs_error() to mark the volume read-only. | ||||