Export limit exceeded: 91441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (91441 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-106112 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106114 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 5.3 Medium |
| ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106117 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, decoding a strip TIFF using CCITT Group 3 or Modified Huffman compression can pass attacker-expanded runs to BitWriterUtils.WriteBits without first checking the current row width. T4TiffCompression.WritePixelRun can accumulate oversized makeup-code runs, and ModifiedHuffmanTiffCompression.Decompress validates the width only after writing. The unchecked writes can overflow the strip buffer, corrupt heap memory, and terminate the process. This strip-path vulnerability is distinct from the tiled decompressor-width mismatch. This issue is fixed in version 4.1.1. | ||||
| CVE-2026-106118 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1. | ||||
| CVE-2026-103871 | 2026-10-07 | 5.4 Medium | ||
| A flaw was found in pulp-python's PyPI simple index. Project names are written into the HTML index without escaping. A user who can publish a Python package can store markup in the package name. A person who opens that index in a browser runs the markup in the origin that served the page, and the attacker or user can take limited actions as that person on that site during the visit. The flaw does not run commands on the server. | ||||
| CVE-2026-98181 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses req->properties[num_properties + i] as write index while simultaneously incrementing `num_properties` inside the loop. At iteration i, num_properties has also incremented by i, so the write is done at `initial_num_properties + 2*i`, skipping every other index and advancing by 2 per iteration. With just 2 connector and 32 plane properties the last write happens at index 64, one slot past the end of the 64-slot (indices 0–63) allocation. A USB device can trigger OOB by advertising the maximum number of properties. Fix by dropping the redundant `+ i`; num_properties is already the correct running index, as gud_connector_fill_properties() fills the preceding slots. | ||||
| CVE-2026-98250 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of NFSEXP_PNFS in the netlink codepath The rework of how block layouts were checked moved the check for NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That patch didn't account for the new call in nfsd4_setup_layout_type(). | ||||
| CVE-2026-98301 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: move switchdev call outside rcu This is a follow-up of one of sashiko's pre-existing bug reports. br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs while holding rcu_read_lock() which invokes the blocking switchdev notifier chain and may sleep. Nonzero MSTI changes come from netlink with rtnl held. Move the switchdev call before entering the rcu section and assert that rtnl is held. The call cannot be deferred because netlink needs its error and extack. Also DSA reads the old bridge MST state during the callback and checks it. A deferred callback will be late and will see the updated state. | ||||
| CVE-2026-106346 | 1 Google | 1 Chrome | 2026-10-07 | 8.8 High |
| Improper state validation in DevTools in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-98289 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unify scc_index when finalising SCC in __unix_walk_scc(). Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.") changed Tarjan's algorithm to update lowlink with lowlink, which is called lowpoint (unix_vertex.scc_index). unix_vertex_dead() assumes all vertices in an SCC share the same lowpoint, but this is not always true if an SCC has two or more back edges, depending on the order of DFS. For example, the graph below has two back edges from B to A and from C to B. A --> B --> C ^ | ^ | `----' `----' If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A), each index and scc_index will be updated as follows. A --> B --> C C = (3, 3) (index, scc_index) B = (2, 2) A = (1, 1) A ... B ... C C = (3, 2)<-. ^ | B = (2, 2) -' `----' A = (1, 1) A ... B ... C C = (3, 2) ^ | . . B = (2, 1)<-. `----' .... A = (1, 1) -' Then, unix_vertex_dead() thinks that B is passed to another SCC with scc_index 2, and the SCC is not garbage-collected. This does not happen if DFS walks in a different order below or starts from B. 1 3 A --> B --> C ^ | ^ | `----' `----' 2 4 Let's unify scc_index across the SCC when finalising it. Note that updating v->index was previously done in unix_scc_dead(), when called from __unix_walk_scc(), just to save one loop. Since __unix_walk_scc() now iterates over the SCC anyway, the update is moved back to __unix_walk_scc() and 'fast' argument is dropped. | ||||
| CVE-2026-98332 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: only operate on TDLS peers in the TDLS code ieee80211_tdls_oper() can operate on the AP station, which then yields various warnings when the AP station is removed then or at a later point in time after being confused for a TDLS peer. Always check that the station is a TDLS peer. | ||||
| CVE-2026-98352 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ credits in the ADDR_RESOLVED handler via ib_cq_pool_get(), before the peer is connected. create_cm() can return -ERESTARTSYS from wait_event_interruptible_timeout() without destroying the CM ID. The init_conns() and stop-and-destroy paths then call destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards rdma_destroy_id(). CMA serializes the handler against rdma_destroy_id() with handler_mutex, but that does not order the GET against destroy_con_cq_qp(). If ADDR_RESOLVED has already passed the DESTROYING check, it can take con_mutex, GET credits, and then lose the con to kfree. Device unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup(). Set a per-connection flag under con_mutex before CQ/QP teardown so a racing ADDR_RESOLVED cannot borrow credits after teardown has begun. | ||||
| CVE-2026-105186 | 1 Itsourcecode | 1 Online Admission System | 2026-10-06 | 6.3 Medium |
| A flaw has been found in itsourcecode Online Admission System 1.0. This impacts an unknown function of the file /new.php. Executing a manipulation of the argument schedid can lead to sql injection. The attack can be launched remotely. The exploit has been published and may be used. | ||||
| CVE-2026-105182 | 1 Sourcecodester | 1 Online Reviewer Management System | 2026-10-06 | 7.3 High |
| A security flaw has been discovered in SourceCodester Online Reviewer Management System 1.0. Impacted is an unknown function of the file /reviewer_0/admins/assessments/activities/btn_functions.php?action=update. The manipulation of the argument Title results in sql injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-105178 | 1 Sourcecodester | 1 Drug Recommendation System | 2026-10-06 | 4.7 Medium |
| A security flaw has been discovered in SourceCodester Drug Recommendation System 1.0. The impacted element is the function mysqli_real_escape_string of the file /Admin/add_symptom.php of the component Symptom Creation. Performing a manipulation of the argument txtname results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-98233 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: clear RX owner on VNET header error Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2 ring slot before converting the virtio-net header. If the conversion fails, the drop path leaves the slot claimed. With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves the only slot unavailable, so the ring also drops the next valid packet. Clear the ownership bit on this error path. TPACKET_V3 already clears its block state here. | ||||
| CVE-2026-105149 | 1 Moosocial | 1 Moosocial | 2026-10-06 | 7.3 High |
| A security flaw has been discovered in mooSocial up to 3.2.4. This issue affects some unknown processing of the file /stores/all-products. Performing a manipulation of the argument rating results in sql injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-105135 | 1 Internlm | 1 Mindsearch | 2026-10-06 | 10 Critical |
| A vulnerability has been found in InternLM MindSearch 0.1.0. This issue affects the function ExecutionAction.run of the file mindsearch/agent/graph.py of the component Planner Agent. The manipulation of the argument inputs leads to code injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-105089 | 1 Wwbn | 1 Avideo | 2026-10-06 | 8.7 High |
| WWBN AVideo through 29.2.0 contains a stored cross-site scripting vulnerability that allows users with upload permission to inject script by setting a malicious video trailer1 URL. The value is rendered unescaped in YouPHPFlix2 templates and channel playlists, letting attackers break out of onclick strings or iframe src attributes to execute JavaScript in victims' browsers. | ||||
| CVE-2026-105166 | 1 Kishor-23 | 2 Food-waste-management-system, Food Waste Management System | 2026-10-06 | 7.3 High |
| A vulnerability was found in kishor-23 food-waste-management-system 411989e3ecb82895e53dca7865f72145f03d7d93/b3a70b2c492dc9904de5be1ad9389bd79b87f82c. The affected element is the function insert of the file fooddonateform.php of the component Food Donation Form. Performing a manipulation of the argument image-choice results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. | ||||