Export limit exceeded: 25815 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25815 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89516 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip. tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID check and the BUG_ON would leave a window where destroy_dsq() can invalidate the id between the two reads and still trigger the BUG_ON. | ||||
| CVE-2026-89509 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: Embed counter driver data in rdma_counter allocation Commit 7e53b31acc7f ("RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()") requires drivers implementing counter ops to embed struct rdma_counter in a driver-specific struct, register its size via INIT_RDMA_OBJ_SIZE, and provide a counter_init callback. The ionic driver was merged without this adaptation, causing a NULL pointer dereference in alloc_and_bind() since rdma_zalloc_drv_obj() allocates zero bytes when size_rdma_counter is unset. Consolidate struct ionic_counter into a new struct ionic_rdma_counter that embeds struct rdma_counter, replace the xarray with a lightweight ida for ID allocation, and add the required counter_init and INIT_RDMA_OBJ_SIZE declarations. | ||||
| CVE-2026-89506 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Add UVERBS_ATTR_UHW to UVERBS_METHOD_REG_MR The original commit missed that three drivers (mthca, irdma, siw) have UHW data associated with reg_mr that cannot be passed through the ioctl. They also assume that the udata cannot be NULL, so failing to pass a valid udata can trigger a NULL udata crash in those drivers. This never happens in real systems since in rdma-core ibv_cmd_reg_mr_ex() does not accept a udata and those three drivers don't use it, however a malicious userspace could trigger it. | ||||
| CVE-2026-89505 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Guard legacy bundles without method_elm The legacy write() path dispatches through a uverbs_api_write_method, but the uverbs_attr_bundle passed to provider code does not have an ioctl method element. If malformed provider input causes the common uverbs validation code to emit an error message, uverbs_get_handler_fn() dereferences the uninitialized method_elm pointer. Initialize method_elm explicitly for legacy bundles and make uverbs_get_handler_fn() return NULL when no ioctl method is present. The legacy dispatcher continues to use its local write method, while the ioctl path continues to use the registered ioctl handler. | ||||
| CVE-2026-89502 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Free cpu_buffer::free_page with subbuf_order When sub-buffers use an order greater than 0, cpu_buffer->free_page is allocated with subbuf_order. Use the correct order for cpu_buffer->free_page. | ||||
| CVE-2026-89455 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix use-after-free of event IRQs during teardown plda_pcie_irq_domain_deinit() removes pcie->event_domain via irq_domain_remove(), but the per-event IRQs mapped from that domain are requested with devm_request_irq() in plda_init_interrupts(). The actual free_irq() for a devm-managed IRQ is deferred by devres until after the calling probe()/remove() function returns. This means irq_domain_remove() can free the domain's internal data before the deferred free_irq() for IRQs still mapped into it has run. When devres later processes that deferred cleanup, it can end up dereferencing the already-freed domain. Free each event IRQ explicitly with devm_free_irq() before removing the domain. This triggers the free immediately and removes the IRQ from the devres tracking list, so devres will not attempt to free it a second time later. Also dispose of the event, INTx, and MSI IRQ mappings with irq_dispose_mapping() before their owning domains are removed. Finally, guard the calls to irq_set_chained_handler_and_data() for pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when those fields hold a valid (>0) IRQ number. This is a pre-existing issue, flagged by automated review during work on an earlier, unrelated patch to this driver. Build-tested and boot-tested on StarFive VisionFive v1.2A board | ||||
| CVE-2026-89454 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts() plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but does not unwind them when later step fails. If platform_get_irq() or either irq_create_mapping() fails in plda_init_interrupts(), the domains are never deinitialized. If irq_create_mapping() fails, port->intx_irq stays initialized. Hence, remove the IRQ domains in the error path by calling plda_pcie_irq_domain_deinit(). Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and msi_irq mappings itself before removing their domains, the msi_irq mapping failure path can go directly to err_irq_domain_deinit instead of disposing of port->intx_irq separately first. This issue was found by automated review of sashiko-bot [mani: commit log] | ||||
| CVE-2026-89453 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Put PCI device after handling PPR faults iommu_call_iopf_notifier() looks up the requester with pci_get_domain_bus_and_slot(), which returns a PCI device with its reference count incremented. Neither the successful iommu_report_device_fault() path nor the abort path drops that reference, so every handled PPR request leaks a PCI device reference. This is the same ownership rule that was fixed for the old iommu_v2 ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was added later as a separate PPR/IOPF notifier path. Drop the PCI device reference after handling the PPR entry. | ||||
| CVE-2026-89449 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add iommu_mock_device_add() first calls iommu_fwspec_init(), which on success allocates both dev->iommu (via dev_iommu_get()) and dev->iommu->fwspec. If the subsequent device_add(dev) call fails, the error path only calls iommu_fwspec_free(dev), which frees fwspec but leaves dev->iommu still allocated. This triggers the following kmemleak report when fuzzing with Syzkaller: BUG: memory leak unreferenced object 0xffff888011e0a200 (size 192): comm "syz.1.1695", pid 24885, jiffies 4295222527 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................ backtrace (crc 25df5bb3): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4575 [inline] slab_alloc_node mm/slub.c:4899 [inline] __kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408 iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087 iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385 mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline] iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline] iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072 iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev) in the device_add() failure path. dev_iommu_free() frees both fwspec and the outer dev_iommu struct and clears dev->iommu. | ||||
| CVE-2026-89447 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Avoid locking internal accesses during unmap iommufd_access_notify_unmap() skips internal accesses because they do not have an external unmap callback to invoke. However, the current test calls iommufd_lock_obj() before checking whether the access is internal. If iommufd_lock_obj() succeeds, the loop then sees the internal access and continues, bypassing the matching iommufd_put_object() used by the normal unmap path. This leaks the object reference taken by iommufd_lock_obj(). Check for internal accesses first so skipped entries are never locked. | ||||
| CVE-2026-89446 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Release current IOAS on xa_store() failure iommufd_take_all_iova_rwsem() takes an object reference and the iova_rwsem write lock before storing the IOAS in the temporary ioas_list xarray. If xa_store() fails, the current IOAS has not been inserted into ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS objects already present in that xarray, so it cannot release the current IOAS. Release the current IOAS rwsem and object reference before unwinding the previously stored entries. | ||||
| CVE-2026-81018 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Free system certificate signatures Multi-certificate support also allows the system authentication object to store ->signature and ->save_signature, which leak when the driver is removed. Free the signatures to avoid leaking memory. | ||||
| CVE-2026-81009 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/query: cap user size passed to copy_struct_to_user io_handle_query_entry() clamps hdr.size for the inbound copy_from_user() but keeps the original user value as usize. copy_struct_to_user() uses that usize and, when it is larger than the kernel result, clear_user()s the trailing bytes. As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing, including on the error path where res_size stays 0. The interface is reachable without a ring via IORING_REGISTER_QUERY. Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_* interfaces. | ||||
| CVE-2026-80999 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from the probe path, which may sleep and is not timing-critical. When the reset GPIO is provided by a sleeping controller such as an I2C I/O expander, gpiod_set_value() warns: WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61 Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT) Workqueue: events_unbound deferred_probe_work_func pc : gpiod_set_value+0x44/0x80 lr : rtl83xx_probe+0x1d8/0x3a0 Call trace: gpiod_set_value+0x44/0x80 (P) rtl83xx_probe+0x1d8/0x3a0 realtek_mdio_probe+0x24/0xa0 mdio_probe+0x38/0x78 really_probe+0xc4/0x3e0 __driver_probe_device+0x15c/0x1b8 driver_probe_device+0xb4/0x120 __device_attach_driver+0xb8/0x1a0 bus_for_each_drv+0x88/0xf0 __device_attach+0xa0/0x1d8 device_initial_probe+0x54/0x68 bus_probe_device+0x38/0xa0 deferred_probe_work_func+0xb8/0x120 process_one_work+0x184/0x4e8 worker_thread+0x188/0x308 kthread+0x130/0x150 ret_from_fork+0x10/0x20 Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can be used without triggering the warning. The reset GPIO has been driven with the non-sleeping gpiod_set_value() since the driver was added in v4.19. The call has since been refactored across several files - from realtek-smi.c / realtek-mdio.c into the common rtl83xx.c module and then into the rtl83xx_reset_assert() and rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore applies as-is only to kernels that carry those helpers (v6.9+); older stable kernels need the same gpiod_set_value_cansleep() conversion at the corresponding open-coded call sites. | ||||
| CVE-2026-80993 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phylink: correctly validate returned PCS in phylink_inband_caps In phylink_inband_caps(), the PCS returned by mac_select_pcs is only checked if NULL but mac_select_pcs can also return an error pointer. This can cause a kernel panic as phylink_pcs_inband_caps() only checks if passed PCS is not NULL and directly dereference ops from the phylink_pcs struct. Use the IS_ERR_OR_NULL macro to address both case where the returned PCS can be NULL or an error pointer and prevent a kernel panic. | ||||
| CVE-2026-80960 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate on-media seg_num against the cache device size seg_num is read from the crc32c-only superblock, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes cache->segments[] and is the value every later on-media segment id is bounded against, yet it is never checked against the device. Because cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for a segment id past the device resolves to ordinary kernel memory beyond the mapping; a new-cache init reaching such an id has cache_seg_init() -> cache_dev_zero_range() memset() 12 KiB over that memory -- an out-of-bounds write into the kernel heap at table load. A zero seg_num makes the segment allocations ZERO_SIZE_PTR. Reject a seg_num that is zero, larger than the device can hold, or larger than PCACHE_CACHE_SEGS_MAX before it is used. | ||||
| CVE-2026-80957 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: detect a cycle in the last-kset chain during replay cache_replay() follows the on-media last-kset chain by next_cache_seg_id with no cond_resched(). A forged chain that points back into a segment it has already visited makes the replay loop follow it forever. Cap the last-kset hops at cache->n_segs; a valid chain visits each segment at most once. | ||||
| CVE-2026-80956 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: only hand out initialized cache segments get_cache_segment() scans the segment map up to cache->n_segs, the physical device segment count, but cache_segs_init() only initializes the first cache_info->n_segs segments. A crafted image with cache_info->n_segs smaller than the device count leaves the remaining pcache_cache_segment structs zeroed (segment.data == NULL), and the allocator can hand one to cache_kset_close(), which writes through the returned segment's data pointer with no NULL check. Bound the allocator's search to cache_info->n_segs so only initialized segments are ever returned. A conforming cache sets n_segs equal to the device segment count, so this rejects nothing legitimate. | ||||
| CVE-2026-80946 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse: copy request headers via a stack buffer for io-uring The fuse-io-uring transport copies req->in.h out to the ring in fuse_uring_copy_to_ring() and req->out.h back in fuse_uring_commit(). Both headers live inside the fuse_request slab object, whose cache (fuse_req_cachep) is created without a usercopy whitelist, so copying them directly to/from userspace trips CONFIG_HARDENED_USERCOPY and panics: usercopy: Kernel memory exposure attempt detected from SLUB object 'fuse_request' (offset 56, size 40)! kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort (mm/usercopy.c:90) Call Trace: __check_heap_object (mm/slub.c:8268) __check_object_size (mm/usercopy.c:197 mm/usercopy.c:258 mm/usercopy.c:223) copy_header_to_ring (fs/fuse/dev_uring.c:618) fuse_uring_prepare_send (fs/fuse/dev_uring.c:776 fs/fuse/dev_uring.c:785) fuse_uring_send_in_task (fs/fuse/dev_uring.c:1306) tctx_task_work_run (io_uring/tw.c:96) task_work_run (kernel/task_work.c:233) io_run_task_work (io_uring/tw.h:84) io_cqring_wait (io_uring/wait.c:278) __do_sys_io_uring_enter (io_uring/io_uring.c:2685) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Bounce both headers through an on-stack copy so the usercopy touches stack memory, not the slab object. | ||||
| CVE-2026-80942 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars() The memory allocated inside rtl92du_init_shared_data() is not freed in any of the subsequent error paths in rtl92du_init_sw_vars(). Fix that by adding a call to rtl92du_deinit_shared_data() in the error path. | ||||