Export limit exceeded: 25815 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25815 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90123 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interrupt core calls the irq_domain_activate() callback from __setup_irq() with desc->lock held and interrupts disabled. Both aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a compatible string with fwnode_device_is_compatible(). fwnode_device_is_compatible() invokes fwnode_property_match_string(), which allocates with GFP_KERNEL. That's obviously not possible with interrupts disabled and a raw spinlock held. Both call sites are only ever handed OF nodes, so use of_device_is_compatible() instead: it walks the property in place and does not allocate. | ||||
| CVE-2026-90125 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv(). | ||||
| CVE-2026-90134 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the address returned by kmap_local_page() and later access or unmap the page using page_address(). This is invalid for highmem pages, and local mappings must also be unmapped using the address returned by kmap_local_page(). Map each destination page in ntfs_decompress() only while producing the current sub-block. Use memcpy_from_page(), memcpy_to_page(), and memzero_page() for the other page accesses. Remove unnecessary local mappings from ntfs_write_cb(), where pages are accessed through the vmap() mapping. | ||||
| CVE-2026-87886 | 2 Acronis, Linux | 5 Acronis Backup, Backup Extension For Plesk, Backup Plugin For Cpanel \& Whm and 2 more | 2026-09-18 | N/A |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. | ||||
| CVE-2026-90107 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() resets a flow struct with a blind memset: spin_lock_bh(&lgr->llc_flow_lock); memset(flow, 0, sizeof(*flow)); flow->type = SMC_LLC_FLOW_NONE; spin_unlock_bh(&lgr->llc_flow_lock); If flow->qentry is non-NULL at this point the pointer is overwritten without the allocation being freed, leaking one kmalloc object. A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set flow->qentry after the legitimate message has been consumed by the waiter via smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that window the duplicate is stashed into flow->qentry, and then lost when smc_llc_flow_stop() zeros the struct. Call smc_llc_flow_qentry_del() inside the lock before the memset. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal case where no entry is pending is a no-op. | ||||
| CVE-2026-90115 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop. | ||||
| CVE-2026-90129 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued. | ||||
| CVE-2026-90130 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-90136 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works | ||||
| CVE-2026-93046 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case. | ||||
| CVE-2026-90168 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2023-1390 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2026-09-18 | 7.5 High |
| A remote denial of service vulnerability was found in the Linux kernel’s TIPC kernel module. The while loop in tipc_link_xmit() hits an unknown state while attempting to parse SKBs, which are not in the queue. Sending two small UDP packets to a system with a UDP bearer results in the CPU utilization for the system to instantly spike to 100%, causing a denial of service condition. | ||||
| CVE-2023-1380 | 5 Canonical, Debian, Linux and 2 more | 14 Ubuntu Linux, Debian Linux, Linux Kernel and 11 more | 2026-09-18 | 7.1 High |
| A slab-out-of-bound read problem was found in brcmf_get_assoc_ies in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux Kernel. This issue could occur when assoc_info->req_len data is bigger than the size of the buffer, defined as WL_EXTRA_BUF_MAX, leading to a denial of service. | ||||
| CVE-2023-1118 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel Eus and 1 more | 2026-09-18 | 7.8 High |
| A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. | ||||
| CVE-2023-35788 | 5 Canonical, Debian, Linux and 2 more | 20 Ubuntu Linux, Debian Linux, Linux Kernel and 17 more | 2026-09-18 | 7.8 High |
| An issue was discovered in fl_set_geneve_opt in net/sched/cls_flower.c in the Linux kernel before 6.3.7. It allows an out-of-bounds write in the flower classifier code via TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets. This may result in denial of service or privilege escalation. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-89804 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix mismatched DMA unmap size for large folios Device-private THP migration maps migration buffers with page_size() and records that length in dma_info->size. For a compound folio page_size() is PAGE_SIZE << order, but two teardown sites still pass a literal PAGE_SIZE to dma_unmap_page(): - nouveau_dmem_migrate_to_ram() on the success path, and - nouveau_dmem_migrate_copy_one() on the copy-error path. For an order > 0 folio this unmaps less than was mapped, leaking the remainder of the IOMMU/IOVA mapping. The other unmap sites, in nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already use the saved size; use it here too. | ||||
| CVE-2026-89809 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD queue triggers a NULL pointer dereference because the for loop that calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the if (pqn->q) block that initializes mqd_mgr. The queue list can contain entries where pqn->q is NULL (kernel queues where only pqn->kq is valid). In the original code: if (pqn->q) { ... mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type]; size = mqd_mgr->mqd_stride(...); } for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block mqd = q->mqd + size * xcc; r = mqd_mgr->debugfs_show_mqd(m, mqd); } When iterating over a queue node where pqn->q is NULL: 1. The if (pqn->q) block is skipped 2. mqd_mgr remains uninitialized (NULL from declaration) 3. The for loop executes anyway 4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode RIP: 0010:0x0 Call Trace: pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu] kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu] seq_read_iter+0x132/0x4b0 ... Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr and related variables are only used when properly initialized. (cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de) | ||||
| CVE-2026-89775 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation Computing the effects of a TLB invalidation involves looking at the size of the mapping cached by the TLB. For S1 mappings such as VNCR, this is deducted from the combination of the base granule size and the mapping level. However, this implies that the S1 MMU is *on*. When the MMU is off, we indicate this with the level being set to a "creative" value of -127 (S1_MMU_DISABLED). This ends-up being misinterpreted by pgshift_level_to_ttl() as it doesn't handle negative levels at all (the level is immediately cast to a u8 and only the bottom two bits considered), leading to an invalidation size of 0. Not helpful. Tidy-up pgshift_level_to_ttl() to handle these negative levels, and ttl_to_size() to always return SZ_1G when no valid TTL is present. This allows the removal of open-coded checks for similar situations. Note that the check for a negative value not explicitely checking for S1_MMU_DISABLED is deliberate, so that actual negative levels introduced with LVA2 and D128 can take the same path if we ever support them. | ||||
| CVE-2026-89789 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free gtp_newlink()'s error path frees tid_hash and addr_hash without waiting for an RCU grace period after clearing sk_user_data. A concurrent gtp_encap_recv() in softirq may still hold the gtp_dev pointer obtained via rcu_dereference_sk_user_data() and access the freed memory. BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152) Call Trace: <IRQ> gtp0_pdp_find+0x1f6/0x200 gtp_encap_recv+0x527/0x24b0 udp_queue_rcv_one_skb+0x75f/0xc10 Add synchronize_net() before the kfree calls in out_hashtable, which covers all error paths from both gtp_encap_enable() and gtp_create_sockets(). | ||||