Export limit exceeded: 25995 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25995 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98196 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has completed before the timer structure is freed. | ||||
| CVE-2026-98202 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (such as rmi_i2c and rmi_spi) invoke rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev device during system power management events. However, transport drivers are fully registered and operational even if the physical RMI driver failed to bind or probe the rmi_dev device. When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or rmi_enable_irq() without driver data attached causes a NULL pointer dereference and General Protection Fault when attempting to lock data->enabled_mutex. Fix this by checking if driver data is attached to rmi_dev in rmi_driver_suspend() and rmi_driver_resume(), exiting early if no driver data is present. | ||||
| CVE-2026-98232 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable() scsi_cdl_enable() uses length fields returned by MODE SENSE to locate the ATA feature mode page in a 64-byte stack buffer. A target can report a total length shorter than its mode header and block descriptors. The unsigned subtraction used for the MODE SELECT length can wrap, and the separately computed buf_data can point beyond buf. During automatic scan, enable is false, so the read-modify-write of buf_data[4] can clear the low two bits of a target-selected out-of-bounds stack byte. scsi_mode_select() can then copy up to 64 bytes from outside the buffer into the outgoing MODE SELECT payload, disclosing stack contents to the target. This is reachable while scanning a USB storage device that identifies as an ATA device and advertises CDL support. No filesystem mount or userspace access to the block device is required. On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific, one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator sampling executed a fixed proof command inside the guest and created a UID-0-owned marker during automatic enumeration, with KASLR and NX enabled. The issue was independently found during security research at Drivesec S.r.l. Cap the available length to the buffer size. Validate and consume the mode header and block descriptor lengths before using the page, and require the five bytes needed to access the CDL field. | ||||
| CVE-2026-98054 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_get() which on success takes the module reference. If any follow up operation causes strace_open() to fail, the refcount shall be put down. | ||||
| CVE-2026-98082 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to leak bioc memory on btrfs_ordered_extent::bioc_list: - An error occurred for btrfs_insert_one_raid_extent() Then the function btrfs_insert_raid_extent() immediately return without freeing any bioc in the bioc_list. - An ordered extent hit an IO error In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and skip the call on btrfs_insert_raid_extent() completely. Fix the problem by: - Introduce a new helper, btrfs_cleanup_ordered_bioc_list() Which will remove all bioc from the bioc_list, and release the bioc. - Call the above helper for btrfs_insert_raid_extent() So that the cleanup helper is always called no matter what. - Call the above helper for btrfs_finish_one_ordered() This is called just before the final release on the ordered extent. This was reported by Sashiko when reviewing another patch. | ||||
| CVE-2026-98083 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects. | ||||
| CVE-2026-98052 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcb->last = true for the final fragment of an SKB; non-final fragments left the field untouched. If a descriptor slot was reused while it still held a stale true from a previous SKB (possible when tx_spb_ring_full() underreported fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and call dev_consume_skb_any() prematurely, freeing the sk_buff while its remaining fragments were still in flight. Unconditionally clear txcb->last before the conditional set so every descriptor slot starts from a known false state regardless of what a prior transmission left behind. | ||||
| CVE-2026-98051 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised next_index from intf->tx_spb_index on every iteration, so incr_ring() always produced the same result and only one slot was ever tested. Move the initialisation before the loop so each iteration advances next_index and the function correctly checks that cnt consecutive descriptor slots are available before allowing a new transmission. | ||||
| CVE-2026-98050 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: <TASK> gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated--- | ||||
| CVE-2026-64041 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: fs210x: fix possible buffer overflow In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) | ||||
| CVE-2026-64042 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Check BAR resources before exporting a DMABUF A DMABUF exports access to BAR resources and, although they are requested at startup time, we need to ensure they really were reserved before exporting. Otherwise, it's possible to access unreserved resources through the export. Add a check to the DMABUF-creation path. | ||||
| CVE-2026-64043 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: fix race between deleting interface and adding new peer While deleting an existing ovpn interface, there is a very narrow window where adding a new peer via netlink may cause the netdevice to hang and prevent its unregistration. It may happen during ovpn_dellink(), when all existing peers are freed and the device is queued for deregistration, but a CMD_PEER_NEW message comes in adding a new peer that takes again a reference to the netdev. At this point there is no way to release the device because we are under the assumption that all peers were already released. Fix the race condition by releasing all peers in ndo_uninit(), when the netdevice has already been removed from the netdev list. Also ovpn_peer_add() has now an extra check that forces the function to bail out if the device reg_state is not REGISTERED. This way any incoming CMD_PEER_NEW racing with the interface deletion routine will simply stop before adding the peer. Note that the above check happens while holding the netdev_lock to prevent racing netdev state changes. ovpn_dellink() is now empty and can be removed. | ||||
| CVE-2026-93288 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which clears the logger pointer without an RCU grace period. Immediately after, ops_free_list() frees the per-net state while concurrent packets might still be executing nf_log_packet() under rcu_read_lock()." Clear the pointer via .pre_exit to make sure rcu readers have completed before pernet storage is free'd. The change in nf_log_syslog.c is only done for consistency: it doesn't use pernet data. | ||||
| CVE-2026-72131 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Prevent shared tags across queues on Apple A11 On Apple A11, tags of pending commands must be unique across the admin and IO queues, else the firmware crashes with "duplicate tag error for tag N", with N being the tag. Apply the existing workaround for M1 of reserving two tags for the admin queue to A11. | ||||
| CVE-2024-41062 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. | ||||
| CVE-2026-98116 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation with an mmap_count check performed under the PCM stream lock, but the lock is released long before the buffer is actually freed: snd_pcm_sync_stop(), constraint refinement and do_free_pages() all happen in between. snd_pcm_mmap_data(), on the other hand, takes no lock at all: it validates against the old buffer's state and dma_bytes, remaps its pages into the VMA, and only then increments mmap_count. A concurrent mmap() can therefore slip in between the check and the free. remap_pfn_range() installs writable PTEs for the old buffer's pages without taking page references, and the subsequent do_free_pages() returns those pages to the page allocator while the VMA still maps them. This leaves a stale, writable mapping of freed pages: a page-level use-after-free that can be leveraged for local privilege escalation. Make snd_pcm_mmap_data() participate in the buffer-access scheme introduced for hw_params/hw_free: acquire runtime->buffer_accessing before validating and remapping, and release it afterwards. Buffer reallocation already fails with -EBUSY while accessors are active, and the mmap side now fails with -EBUSY while a reallocation is in progress, so the validate/remap sequence and the check/free sequence can no longer interleave. A reproducer that turns this race into a stale writable mapping of the freed DMA buffer pages is available on request. | ||||
| CVE-2026-98113 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log. | ||||
| CVE-2026-98111 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field. | ||||
| CVE-2026-98109 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed. | ||||
| CVE-2026-98108 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle. | ||||