Export limit exceeded: 25372 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25372 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89882 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rkvdec: hevc: guard INTER_REF_PIC_SET_PRED index underflow st_ref_pic_set_prediction() computes the reference RPS index as st_rps_idx - (delta_idx_minus1 + 1) per HEVC spec equation 7-59. Both operands are u8, so when delta_idx_minus1 + 1 exceeds the current index the subtraction wraps and the subsequent array access at calculated_rps_st_sets[ref_rps_idx] reads far out of bounds. A userspace V4L2 client that can open the RKVDEC m2m decoder can submit an EXT_SPS_ST_RPS control with INTER_REF_PIC_SET_PRED set and delta_idx_minus1 crafted to trigger the underflow. Reject the entry early when the reference index would underflow. | ||||
| CVE-2026-89870 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-53071 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). | ||||
| CVE-2026-53016 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. | ||||
| CVE-2026-46117 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | ||||
| CVE-2026-46054 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix overlayfs mmap() and mprotect() access checks The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-90021 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref to 1 and it can only be incremented when a sound card is registered via f_midi_register_card(). f_midi_register_card() is only called in f_midi_bind() which actually performs INIT_WORK. If f_midi_bind() is never run, work is not initialized and the if condition in f_midi_free becomes true, this results in a warning later in __flush_work as work->func = 0. Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc(). | ||||
| CVE-2026-89955 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix NULL deref in status_show() during queue probe When vfio_ap_mdev_probe_queue() creates the sysfs attribute group, the queue's driver data has not yet been set. A concurrent read of the 'status' attribute can therefore call dev_get_drvdata() and get NULL, which is then passed directly to vfio_ap_mdev_for_queue() where q->apqn is unconditionally dereferenced, causing a NULL pointer dereference. Fix this by acquiring the update locks before calling sysfs_create_group(). The status_show() function acquires guests_lock before reading the driver data, so any concurrent read will block until after dev_set_drvdata() has been called and the update locks are released. As a bonus, the APQN no longer needs to be read from the queue struct after allocation — it can be read directly from apdev before allocation and stored in a local variable, which is then assigned to q->apqn once the allocation succeeds. | ||||
| CVE-2026-89950 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: linearize skbuff for packet generation batadv_mcast_forw_packet() and batadv_mcast_forw_scrape() is not only called (indirectly) by the unsharing+linearizing batadv_recv_mcast_packet() handler. When it is called (indirectly) by batadv_mcast_forw_mcsend() then it will be unshared but not linearized. The SKB_LINEAR_ASSERT() can therefore cause a fatal BUG(). The linearization should happen during the expansion of the head because the scrape function can be hit already during the initial batadv_mcast_forw_mode() selection code: * batadv_interface_tx * batadv_mcast_forw_mode * batadv_mcast_forw_mode_by_count() * batadv_mcast_forw_push() -> calls batadv_mcast_forw_expand_head() before everything else * batadv_mcast_forw_push_tvlvs() * batadv_mcast_forw_push_dests() * batadv_mcast_forw_push_adjust_padding() * batadv_mcast_forw_scrape() | ||||
| CVE-2026-89909 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Free init resources if kvm_init() fails kvm_loongarch_init() calls kvm_loongarch_env_init() to allocate the per-CPU kvm_context (vmcs) and kvm_loongarch_ops and to register the perf callbacks, and then calls kvm_init(). If kvm_init() fails its result is returned directly, but since module_init() does not run the module_exit() stuff on failure, so kvm_loongarch_env_exit() is never called and those resources are leaked. So call kvm_loongarch_env_exit() when kvm_init() fails, matching the teardown-on-failure pattern used by riscv_kvm_init(). | ||||
| CVE-2026-89865 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents. | ||||
| CVE-2026-89858 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() qla2x00_update_fru_versions() copies the user-supplied BSG request into a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates list->count times over the qla_image_version array embedded in that buffer, advancing the image pointer each iteration. count is taken directly from user input with no upper bound, while only (DMA_POOL_SIZE - sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries actually fit. A larger count walks the image pointer off the end of the stack buffer, reading adjacent kernel stack memory and sending it to the device via qla2x00_write_sfp(). Reject requests whose declared count does not fit in the buffer. | ||||
| CVE-2026-89851 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer, so a successful parse would dereference NULL and oops. Worse, the int return value (0 on success, negative errno on failure) was assigned to the unsigned long enable flag, inverting the intended logic: a valid number was treated as "disable" while a parse failure enabled FCE. Parse the value into enable and propagate parse errors to userspace. | ||||
| CVE-2026-89831 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: protect critical_task_priority updates with s_umount The sysfs store path already takes s_umount for GC thread control entries, and ckpt_thread_ioprio is covered as well. critical_task_priority also updates checkpoint or GC kthread scheduling state, but it is not covered by that serialization. It can race with remount or teardown paths that are stopping those threads. Protect critical_task_priority sysfs writes with s_umount too. | ||||
| CVE-2026-89824 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel-edp: fix i2c adapter leak on probe failure Make sure to drop the i2c adapter reference on probe failure (e.g. probe deferral) and on driver unbind also if a devicetree redundantly uses the 'ddc-i2c-bus' property to point to the aux ddc bus. | ||||
| CVE-2026-89539 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: reject duplicate CREDS_VALUE options gssx_dec_option_array() walks the wire-supplied option array and, for every entry whose name matches CREDS_VALUE, calls gssx_dec_linux_creds() on the same struct svc_cred. That helper unconditionally installs a fresh groups_alloc() result into creds->cr_group_info without releasing whatever pointer was already there: for (i = 0; i < count; i++) { ... decode name ... if (length == sizeof(CREDS_VALUE) && memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) { err = gssx_dec_linux_creds(xdr, creds); ... } } A reply that carries two CREDS_VALUE entries therefore overwrites cr_group_info on the second iteration and orphans the group_info allocated by the first call. The earlier free_creds path only releases the last cr_group_info via free_svc_cred(), so the first allocation's refcount stays at one and its kvmalloc-backed storage is leaked. No in-tree caller of gssp_accept_sec_context_upcall() expects more than one CREDS_VALUE per reply. Fix by tracking whether a CREDS_VALUE option has already been decoded and returning -EINVAL on any subsequent match, so the free_creds path releases the single group_info that was installed. | ||||
| CVE-2026-89562 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: fix hardware header length for NBMA tunnels ip6gre_tnl_link_config_route() accumulates the lower device's hardware header length into dev->hard_header_len whenever header_ops is set. This is incorrect for both users of header_ops. ip6gretap and ip6erspan have a fixed Ethernet hardware header length. For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header, the optional FOU or GUE header, and the outer IPv6 header. The lower device header is headroom needed later, not part of the tunnel device's hardware header. Keep the lower device header in needed_headroom. Set hard_header_len to the tunnel header length only for ARPHRD_IP6GRE devices with header_ops, and leave the fixed Ethernet header length unchanged for tap and erspan devices. | ||||
| CVE-2026-52924 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||