Export limit exceeded: 17725 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413994 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413994 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 93026 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93026 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-79802 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 8.8 High |
| A command injection vulnerability exists in the client software of ClearPass Policy Manager. Successful exploitation could allow an attacker who is able to supply crafted input to the affected software to execute arbitrary commands with elevated privileges on the affected host. | ||||
| CVE-2026-79799 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 8.8 High |
| A vulnerability in the web-based management interface of ClearPass Policy Manager could allow an unauthenticated remote attacker to conduct a stored cross-site scripting (XSS) attack against an administrative user of the interface. A successful exploit could allow an attacker to execute arbitrary script code in a victim's browser in the context of the affected interface. | ||||
| CVE-2026-19186 | 1 Zephyrproject | 1 Zephyr | 2026-10-07 | 8.1 High |
| ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255). The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a one-byte payload. The result is an out-of-bounds read and an out-of-bounds write of up to roughly 240 bytes into the adjacent network-buffer pool, corrupting other packets or allocator metadata and typically faulting the target. The out-of-bounds content is not attacker-chosen (it is ciphertext XOR keystream over out-of-bounds memory) and the frame is dropped when tag verification fails, so the primary impact is memory corruption and denial of service rather than information disclosure. Exposure is limited to configurations that enable the experimental CONFIG_NET_L2_IEEE802154_SECURITY option, select a crypto device via CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME, and have established a security session with a level other than IEEE802154_SECURITY_LEVEL_NONE; with security disabled or at level NONE the tag length is zero and no underflow occurs. The fix rejects frames shorter than ll_hdr_len + authtag_len before the subtraction, and adds the matching guard on the transmit side in ieee802154_create_data_frame(). | ||||
| CVE-2026-14911 | 1 Asus | 1 Router | 2026-10-07 | N/A |
| Improper Neutralization of Input During Web Page Generation (“Cross-site Scripting”) in ASUS router modules allows a remote attacker to read DOM information, modify router settings, and cause a denial-of-service condition when an authenticated user visits a crafted URL.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. | ||||
| CVE-2021-21345 | 7 Apache, Debian, Fedoraproject and 4 more | 23 Activemq, Jmeter, Debian Linux and 20 more | 2026-10-07 | 5.8 Medium |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. | ||||
| CVE-2020-26259 | 5 Apache, Debian, Fedoraproject and 2 more | 10 Struts, Debian Linux, Fedora and 7 more | 2026-10-07 | 6.8 Medium |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.15, is vulnerable to an Arbitrary File Deletion on the local host when unmarshalling. The vulnerability may allow a remote attacker to delete arbitrary know files on the host as log as the executing process has sufficient rights only by manipulating the processed input stream. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.15. The reported vulnerability does not exist running Java 15 or higher. No user is affected, who followed the recommendation to setup XStream's Security Framework with a whitelist! Anyone relying on XStream's default blacklist can immediately switch to a whilelist for the allowed types to avoid the vulnerability. Users of XStream 1.4.14 or below who still want to use XStream default blacklist can use a workaround described in more detailed in the referenced advisories. | ||||
| CVE-2020-26217 | 6 Apache, Debian, Netapp and 3 more | 23 Activemq, Debian Linux, Snapmanager and 20 more | 2026-10-07 | 8 High |
| XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14. | ||||
| CVE-2020-14304 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 4.4 Medium |
| A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. | ||||
| CVE-2019-16935 | 4 Canonical, Debian, Python and 1 more | 6 Ubuntu Linux, Debian Linux, Python and 3 more | 2026-10-07 | 6.1 Medium |
| The documentation XML-RPC server in Python through 2.7.16, 3.x through 3.6.9, and 3.7.x through 3.7.4 has XSS via the server_title field. This occurs in Lib/DocXMLRPCServer.py in Python 2.x, and in Lib/xmlrpc/server.py in Python 3.x. If set_server_title is called with untrusted input, arbitrary JavaScript can be delivered to clients that visit the http URL for this server. | ||||
| CVE-2026-105747 | 2 Docling, Docling-project | 2 Docling, Docling | 2026-10-07 | 4.3 Medium |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.45.0 until 2.131.0, METS-GBS format detection in docling/datamodel/document.py and the backend in docling/backend/mets_gbs_backend.py call tarfile.TarFile.getmembers() before enforcing the max_member_count limit, causing the full archive member list to be allocated before the limit can stop processing. A small gzip-compressed tar archive with a very large number of empty members can therefore consume memory proportional to the declared member count, including during format detection before the allowed_formats restriction is applied. This issue is a residual weakness in the member-count protection added for CVE-2026-44018. This issue is fixed in 2.131.0. | ||||
| CVE-2026-105748 | 2 Docling, Docling-project | 2 Docling, Docling | 2026-10-07 | 4.3 Medium |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.16.0 until 2.131.0, the InputFormat.JSON_DOCLING backend in docling/backend/json/docling_json_backend.py validates serialized DoclingDocument input without rejecting picture image references that contain local paths or file URIs. When the document is enriched or exported with ImageRefMode.EMBEDDED, the DoclingDocument._with_embedded_pictures and ImageRef.pil_image methods can open those references and place readable image bytes in Markdown or HTML output. Disclosure is limited to files Pillow can decode as images, while differing decode behavior can also reveal whether a path exists. Direct untrusted loading through docling-core is outside this Docling fix. This issue is fixed in 2.131.0. | ||||
| CVE-2026-20173 | 1 Cisco | 1 Nx-os Software | 2026-10-07 | 5.8 Medium |
| A vulnerability in Cisco NX-OS Software could allow an unauthenticated, remote attacker to exhaust system resources, causing a denial of service (DoS) condition. This vulnerability exists because rate limiting was improperly applied to some protocols. An attacker could exploit this vulnerability by sending a high rate of UDP or TCP connections to a data plane interface on an affected device. A successful exploit could allow the attacker to cause instability to various routing and control plane protocols through some packet loss and temporary disruptions, causing a DoS condition. This DoS condition will clear without manual intervention soon after the high rate of traffic is stopped. | ||||
| CVE-2026-79816 | 1 Hewlett Packard Enterprise (hpe) | 1 Clearpass Policy Manager (cppm) | 2026-10-07 | 5.4 Medium |
| A vulnerability in a client interface of HPE Networking ClearPass Policy Manager could allow an unauthenticated remote attacker to conduct a DOM-based cross-site scripting (XSS) attack against a user of the affected client interface. Successful exploitation could allow an attacker to execute arbitrary script code in a victim's browser context within the affected client interface. | ||||
| CVE-2026-15894 | 1 Zephyrproject | 1 Zephyr | 2026-10-07 | 8.8 High |
| The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it. The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacker can therefore append extra AD structures or padding after the Solicitation Service Data to make buf->len exceed 17. bt_mesh_scan_cb() is registered directly as the BLE scan callback, so buf is raw, unauthenticated advertising data received over the air. Any device in radio range can send a non-connectable advertisement carrying a crafted mesh Proxy Solicitation to a node that has CONFIG_BT_MESH_OD_PRIV_PROXY_SRV enabled and is currently eligible to be solicited (GATT proxy disabled, On-Demand Private Proxy enabled), with no pairing, bonding, or provisioning. The result is an attacker-controlled stack overwrite — plausibly leading to remote code execution and at minimum a reliable remote denial of service. The fix trims buf->len to the spec-fixed 17 octets (dropping the PDU if fewer remain) before decryption. | ||||
| CVE-2026-106230 | 1 Google | 2 Android, Chrome | 2026-10-07 | 5.3 Medium |
| Incorrect reference resolution in Offline in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2021-27703 | 2026-10-07 | 5.4 Medium | ||
| Sercomm Model Etisalat Model S3- AC2100 is affected by Cross Site Scripting (XSS) via the firmware update page. | ||||
| CVE-2026-106513 | 1 Misp | 1 Misp \(malware Information Sharing Platform\) | 2026-10-07 | N/A |
| MISP exposes critical infrastructure settings—specifically the Redis host addresses used by the core application, the ZeroMQ plugin, and the SimpleBackgroundJobs plugin—through its web UI and API to site-admin users. The background job workers trust raw Redis job payloads without additional validation. An attacker who obtains a hijacked site-admin session (for example, through a stored cross-site scripting vulnerability) can modify the Redis host settings to point at an attacker-controlled Redis server and then restart the workers. Once the workers connect to the attacker's Redis instance, the attacker can inject malicious job payloads that the workers execute, achieving arbitrary command execution as the worker account. Additionally, the download_attachments_on_load setting, which controls inline attachment rendering, was modifiable through the same interface, allowing a hijacked session to re-enable a feature that could facilitate further client-side attacks. The vulnerability requires site-admin privileges and a prior session-compromise mechanism; it does not require unauthenticated access. The impact is remote code execution in the context of the MISP worker process and potential data exfiltration through the attacker-controlled Redis connection. | ||||
| CVE-2026-106512 | 1 Misp | 1 Sachertortephp \(cakephp-based Misp Application\) | 2026-10-07 | N/A |
| The CakeResponse::download() method in lib/Cake/Network/CakeResponse.php constructs a Content-Disposition header by directly interpolating a caller-supplied filename into a quoted-string value without sanitization. Two distinct injection vectors exist in the unpatched code. First, if the filename contains C0 control characters (CR or LF), PHP refuses to emit the entire Content-Disposition header, silently dropping the attachment disposition. The response body is then served with its own Content-Type (for example text/html for an .html attachment) and renders inline in the browser on the application origin, creating a stored cross-site scripting condition. The commit message notes this is reachable even when the download_attachments_on_load setting is enabled, meaning a victim merely needs to view a page that triggers the download. Second, a double-quote character in the filename terminates the quoted-string value early, permitting injection of additional Content-Disposition parameters. The affected code path covers all callers of CakeResponse::download(), including attribute downloads, proposal downloads, and restSearch exports. An authenticated user who can create or upload an attachment with a crafted filename (for example through MISP attribute naming or proposal attachment naming) can store the malicious filename. When any other authenticated user views the affected page, the unsanitized filename is reflected into the HTTP response header, resulting in header manipulation and potential execution of arbitrary HTML or JavaScript in the context of the application origin. The security impact is equivalent to a stored cross-site scripting vulnerability, allowing session hijacking, data exfiltration, and unauthorized actions on behalf of the victim. | ||||
| CVE-2026-106453 | 1 Yawkat | 1 Lz4-java | 2026-10-07 | 5.3 Medium |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, LZ4DecompressorWithLength uses getDecompressedLength to trust the four-byte decompressed-length header before validating the compressed input, allowing a five-byte attacker-supplied input whose header declares a large output size to request up to approximately 2 GiB and exhaust the JVM heap. Convenience overloads backed by LZ4FastDecompressor or LZ4SafeDecompressor allocate the untrusted size, while overloads that write to a caller-provided destination buffer are not affected because the caller controls the destination size. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-106449 | 1 Yawkat | 1 Lz4-java | 2026-10-07 | 3.7 Low |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.4, net.jpountz.lz4.LZ4BlockInputStream configured with stopOnEmptyBlock set to false handles each well-formed empty LZ4Block by recursively calling refill(), allowing a long sequence of empty blocks in an attacker-controlled compressed stream to exhaust the decoding thread's stack and throw StackOverflowError. The default stopOnEmptyBlock setting is true and is not affected, and the issue does not cause memory corruption. This issue is fixed in version 1.11.4. | ||||