Export limit exceeded: 47751 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47751 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-42240 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/bhi: Avoid warning in #DB handler due to BHI mitigation When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler (exc_debug_kernel()) to issue a warning because single-step is used outside the entry_SYSENTER_compat() function. To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY after making sure the TF flag is cleared. The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped) The program is expected to crash, and the #DB handler will issue a warning. Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ] | ||||
| CVE-2024-42237 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it. | ||||
| CVE-2024-42126 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt. nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable) [ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0 [ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8 Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu first chunk is not embedded. | ||||
| CVE-2024-42085 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system to enter suspend status with below command: echo mem > /sys/power/state There will be a deadlock issue occurring. Detailed invoking path as below: dwc3_suspend_common() spin_lock_irqsave(&dwc->lock, flags); <-- 1st dwc3_gadget_suspend(dwc); dwc3_gadget_soft_disconnect(dwc); spin_lock_irqsave(&dwc->lock, flags); <-- 2nd This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") that removes the code of checking whether dwc->gadget_driver is NULL or not. It causes the following code is executed and deadlock occurs when trying to get the spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3: Remove DWC3 locking during gadget suspend/resume") that forgot to remove the lock of otg mode. So, remove the redundant lock of otg mode during gadget suspend/resume. | ||||
| CVE-2024-41810 | 2 Redhat, Twisted | 2 Ansible Automation Platform, Twisted | 2025-11-03 | 6.1 Medium |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. The `twisted.web.util.redirectTo` function contains an HTML injection vulnerability. If application code allows an attacker to control the redirect URL this vulnerability may result in Reflected Cross-Site Scripting (XSS) in the redirect response HTML body. This vulnerability is fixed in 24.7.0rc1. | ||||
| CVE-2024-41088 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description] | ||||
| CVE-2024-41080 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), and then it is re-acquired after the function call. This change ensures that the locks are acquired in the correct order, preventing the possibility of a deadlock. | ||||
| CVE-2024-40989 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Disassociate vcpus from redistributor region on teardown When tearing down a redistributor region, make sure we don't have any dangling pointer to that region stored in a vcpu. | ||||
| CVE-2024-40977 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery. | ||||
| CVE-2024-40927 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Handle TD clearing for multiple streams case When multiple streams are in use, multiple TDs might be in flight when an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for each, to ensure everything is reset properly and the caches cleared. Change the logic so that any N>1 TDs found active for different streams are deferred until after the first one is processed, calling xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to queue another command until we are done with all of them. Also change the error/"should never happen" paths to ensure we at least clear any affected TDs, even if we can't issue a command to clear the hardware cache, and complain loudly with an xhci_warn() if this ever happens. This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") early on in the XHCI driver's life, when stream support was first added. It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"), which added a FIXME comment for the problem case (without materially changing the behavior as far as I can tell, though the new logic made the problem more obvious). Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs."), it was acknowledged again. [Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") was a targeted regression fix to the previously mentioned patch. Users reported issues with usb stuck after unmounting/disconnecting UAS devices. This rolled back the TD clearing of multiple streams to its original state.] Apparently the commit author was aware of the problem (yet still chose to submit it): It was still mentioned as a FIXME, an xhci_dbg() was added to log the problem condition, and the remaining issue was mentioned in the commit description. The choice of making the log type xhci_dbg() for what is, at this point, a completely unhandled and known broken condition is puzzling and unfortunate, as it guarantees that no actual users would see the log in production, thereby making it nigh undebuggable (indeed, even if you turn on DEBUG, the message doesn't really hint at there being a problem at all). It took me *months* of random xHC crashes to finally find a reliable repro and be able to do a deep dive debug session, which could all have been avoided had this unhandled, broken condition been actually reported with a warning, as it should have been as a bug intentionally left in unfixed (never mind that it shouldn't have been left in at all). > Another fix to solve clearing the caches of all stream rings with > cancelled TDs is needed, but not as urgent. 3 years after that statement and 14 years after the original bug was introduced, I think it's finally time to fix it. And maybe next time let's not leave bugs unfixed (that are actually worse than the original bug), and let's actually get people to review kernel commits please. Fixes xHC crashes and IOMMU faults with UAS devices when handling errors/faults. Easiest repro is to use `hdparm` to mark an early sector (e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop. At least in the case of JMicron controllers, the read errors end up having to cancel two TDs (for two queued requests to different streams) and the one that didn't get cleared properly ends up faulting the xHC entirely when it tries to access DMA pages that have since been unmapped, referred to by the stale TDs. This normally happens quickly (after two or three loops). After this fix, I left the `cat` in a loop running overnight and experienced no xHC failures, with all read errors recovered properly. Repro'd and tested on an Apple M1 Mac Mini (dwc3 host). On systems without an IOMMU, this bug would instead silently corrupt freed memory, making this a ---truncated--- | ||||
| CVE-2024-39497 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE) Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot: BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags)); Return -EINVAL early if COW mapping is detected. This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example: void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0; | ||||
| CVE-2024-38553 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. | ||||
| CVE-2024-38476 | 3 Apache, Netapp, Redhat | 9 Http Server, Clustered Data Ontap, Enterprise Linux and 6 more | 2025-11-03 | 9.8 Critical |
| Vulnerability in core of Apache HTTP Server 2.4.59 and earlier are vulnerably to information disclosure, SSRF or local script execution via backend applications whose response headers are malicious or exploitable. Users are recommended to upgrade to version 2.4.60, which fixes this issue. | ||||
| CVE-2024-36461 | 1 Zabbix | 1 Zabbix | 2025-11-03 | 9.1 Critical |
| Within Zabbix, users have the ability to directly modify memory pointers in the JavaScript engine. | ||||
| CVE-2024-1597 | 4 Fedoraproject, Pgjdbc, Postgresql and 1 more | 14 Fedora, Pgjdbc, Postgresql Jdbc Driver and 11 more | 2025-11-03 | 10 Critical |
| pgjdbc, the PostgreSQL JDBC Driver, allows attacker to inject SQL if using PreferQueryMode=SIMPLE. Note this is not the default. In the default mode there is no vulnerability. A placeholder for a numeric value must be immediately preceded by a minus. There must be a second placeholder for a string value after the first placeholder; both must be on the same line. By constructing a matching string payload, the attacker can inject SQL to alter the query,bypassing the protections that parameterized queries bring against SQL Injection attacks. Versions before 42.7.2, 42.6.1, 42.5.5, 42.4.4, 42.3.9, and 42.2.28 are affected. | ||||
| CVE-2023-38522 | 1 Apache | 1 Traffic Server | 2025-11-03 | 7.5 High |
| Apache Traffic Server accepts characters that are not allowed for HTTP field names and forwards malformed requests to origin servers. This can be utilized for request smuggling and may also lead cache poisoning if the origin servers are vulnerable. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.10, from 9.0.0 through 9.2.4. Users are recommended to upgrade to version 8.1.11 or 9.2.5, which fixes the issue. | ||||
| CVE-2023-38368 | 1 Ibm | 2 Security Access Manager, Security Verify Access Docker | 2025-11-03 | 5.5 Medium |
| IBM Security Access Manager Docker 10.0.0.0 through 10.0.7.1 could disclose sensitive information to a local user to do improper permission controls. IBM X-Force ID: 261195. | ||||
| CVE-2023-30581 | 2 Nodejs, Redhat | 3 Node.js, Enterprise Linux, Rhel Eus | 2025-11-03 | 7.5 High |
| The use of __proto__ in process.mainModule.__proto__.require() can bypass the policy mechanism and require modules outside of the policy.json definition. This vulnerability affects all users using the experimental policy mechanism in all active release lines: v16, v18 and, v20. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js | ||||
| CVE-2023-2952 | 3 Debian, Redhat, Wireshark | 3 Debian Linux, Enterprise Linux, Wireshark | 2025-11-03 | 5.3 Medium |
| XRA dissector infinite loop in Wireshark 4.0.0 to 4.0.5 and 3.6.0 to 3.6.13 allows denial of service via packet injection or crafted capture file | ||||
| CVE-2023-2879 | 2 Debian, Wireshark | 2 Debian Linux, Wireshark | 2025-11-03 | 6.3 Medium |
| GDSDB infinite loop in Wireshark 4.0.0 to 4.0.5 and 3.6.0 to 3.6.13 allows denial of service via packet injection or crafted capture file | ||||