Export limit exceeded: 403300 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25219 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25219 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98242 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix silent overflow for phys vec to sgt In case MMIO size is bigger than 4G and peer2peer DMA goes through host bridge, we trigger a code path that assigns the total linked IOVA (which is greater than 4G) to mapped_len. Previously, `mapped_len` was declared as 32-bit `unsigned int`. When accumulating `size_t` lengths, this leads to a silent wrap-around. This truncation causes truncated lengths to be passed to functions like `fill_sg_entry()`. Fix this by changing `mapped_len` to `size_t` (64-bit). While at it, fix similar potential overflow issues in `calc_sg_nents` by using `check_add_overflow()` for `nents` and using `unsigned int` for the loop iterator in `fill_sg_entry` to match. | ||||
| CVE-2026-98340 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: only group hidden BSSes with beacon entries When a probe response for an unknown BSS comes in, __cfg80211_bss_update() looks for an existing entry with the same BSSID and a hidden (zero-length or NUL-filled) SSID, and if it finds one it groups them, using the beacon IEs from the existing entry. But that could find another entry without a beacon, if it was also from a probe response (with SSID), so there's a group without beacon elements. If a beacon with a hidden SSID for that BSSID arrives later, cfg80211_combine_bsses() goes looking for the probe response entries that belong to it - i.e. entries with the same BSSID and channel that have no beacon IEs - and finds those two. They are already grouped with each other, so it hits its WARN_ON_ONCE(bss->pub.hidden_beacon_bss) WARN_ON_ONCE(!list_empty(&bss->hidden_list)) which are there because an entry without beacon elements is not supposed to be part of a group yet. Only combine entries when a beacon was already received, ones that are kept separate will be combined when a beacon arrives. | ||||
| CVE-2026-98350 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: pass PMKID to firmware if present Zero out auth_status on initialization. Otherwise, garbage will leak from the stack to the firmware (when ssid is less than 32 bytes and/or when params->pmkid is set). Then, pass the params->pmkid to the firmware (without it, the firmware caches a garbage PMKID on successful authentication and denies a subsequent association request that includes the PMKID). | ||||
| CVE-2026-98165 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: restrict BAR0 fallback read to SR-IOV VFs only The BAR0 fallback read path was introduced as a workaround for SR-IOV VFs where the VRAM aperture is not available during early init. Restrict this workaround to only SR-IOV VFs where it's needed. (cherry picked from commit d8a0affd207c813bd063fa2c27786f449eaf92b8) | ||||
| CVE-2026-98054 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_get() which on success takes the module reference. If any follow up operation causes strace_open() to fail, the refcount shall be put down. | ||||
| CVE-2026-98053 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Refactor and fix init_config access Existing code accesses enties found in ->init_configs array through indexes that are part of ->config_ids array. Those two are limited by: ->num_init_configs and ->num_config_ids respectively. Using ID larger or equal to ->num_init_configs leads to out-of-bounds access: avs_path_module_send_init_configs() loop: (...) &acomp->tplg->init_configs[ids[i]] ^ out-of-bounds candidate Rather than adding another if-statement, refactor the code. There is no need to store the IDs, have a list of pointers to actual config-entries instead. As the verification of ->init_config entries does not differ from verification of other types that are part of the topology.c file, simply reuse the code. | ||||
| CVE-2026-98224 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: correctly unaccount on mmap_prepare() failure __mmap_setup() accounts memory for relevant mappings via: security_vm_enough_memory_mm() -> __vm_enough_memory() -> vm_acct_memory() If __mmap_setup() fails, this indicates that this accounting did not take place, and thus it's appropriate for __mmap_region() to jump to abort_munmap. However if call_mmap_prepare() fails, it also jumps there and any accounted memory is not correctly unaccounted. Fix this by handling each error separately. | ||||
| CVE-2026-98082 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to leak bioc memory on btrfs_ordered_extent::bioc_list: - An error occurred for btrfs_insert_one_raid_extent() Then the function btrfs_insert_raid_extent() immediately return without freeing any bioc in the bioc_list. - An ordered extent hit an IO error In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and skip the call on btrfs_insert_raid_extent() completely. Fix the problem by: - Introduce a new helper, btrfs_cleanup_ordered_bioc_list() Which will remove all bioc from the bioc_list, and release the bioc. - Call the above helper for btrfs_insert_raid_extent() So that the cleanup helper is always called no matter what. - Call the above helper for btrfs_finish_one_ordered() This is called just before the final release on the ordered extent. This was reported by Sashiko when reviewing another patch. | ||||
| CVE-2026-98179 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix rmmio iounmap skipped on device removal amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so drm_dev_enter() is already false there and the iounmap() guarded by it is skipped. This .remove path runs on both hot-unplug and plain rmmod, so the register BAR ioremap mapping leaks one instance per unload. Unmap rmmio unconditionally (guard only on non-NULL) and drop the now unused idx. (cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6) | ||||
| CVE-2026-98182 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: refuse to make a monitor active when it has no queue A monitor interface only gets a TXQ if it's created active, and one can't be added later. Setting the flag on a down interface is still allowed, so the driver is handed a monitor with no queue. ath9k dereferences it: BUG: kernel NULL pointer dereference, address: 0000000000000066 RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k] ath9k_add_interface+0x10c/0x140 [ath9k] drv_add_interface+0x54/0x250 [mac80211] ieee80211_do_open+0x32f/0x800 [mac80211] Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by "ip link set X up". RTNL is held, so netlink operations block behind it. Refuse the flag when there is no queue to give. | ||||
| CVE-2026-98183 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds read for empty PREQ elements ieee80211_mesh_preq_size_ok() derives the location of the PREQ bottom fields before checking whether the element contains even the fixed header. ieee80211_mesh_hwmp_preq_get_bottom() reads the flags byte to account for the optional Address Extension field. Consequently, an empty PREQ element causes a one-byte read beyond its declared payload. Move the helper call after both size checks, so the bottom fields are only accessed when they are present. | ||||
| CVE-2026-98185 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: validate scan response extents mwifiex_ret_802_11_scan() subtracts the fixed response fields and the firmware-provided BSS length from resp->size without first proving that either extent fits. A short response or oversized BSS length can therefore underflow tlv_buf_size and make the TLV parser walk beyond the command response. Compute the fixed extent from the selected normal or background scan response. Validate that the fixed fields and BSS data fit before deriving the TLV extent and entering the parser. | ||||
| CVE-2026-98201 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_ff_upload() then stores the full native structure in ff->effects[id], from where a uinput based force feedback daemon can read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to userspace. Zero the effect before the compat copy. | ||||
| CVE-2026-98204 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes into SMBus blocks in rmi_smb_write_block(), the loop calculates block_len using the original total length (len) instead of the remaining length (cur_len). If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32 for every iteration, even on the final partial chunk where fewer than 32 bytes remain. This causes smb_block_write() to read 32 bytes from the advanced data buffer pointer, reading past the end of the input buffer. Fix this by calculating block_len using cur_len and advancing the buffer and address pointers by block_len. | ||||
| CVE-2026-98210 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host through the devm tail, but neither it nor mmc_remove_host() drains the driver's own asynchronous state. host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(), is deleted only by the DMA- and IRQ-complete paths, which the remove path does not explicitly drain; it can therefore fire after the host is freed and dereference it in mxcmci_watchdog(). host->datawork, armed from the IRQ handler on the PIO path, is not cancelled by the remove path either. Free the devm-registered IRQ, then cancel datawork and delete the watchdog in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first keeps a trailing handler from re-arming datawork between the cancel and the host free. Both callbacks are non-self-rearming. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98211 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98219 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Close the pre-enable ops error claim window scx_alloc_and_add_sched() publishes ops->priv before scx_root_enable_workfn() switches the state to SCX_ENABLING. An error claimed via scx_bpf_error_bstr() from an associated BPF program in that window is consumed by scx_disable_workfn(), which takes the pre-enable shortcut in scx_root_disable(). The shortcut returns without any teardown and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg racing the enable workfn's own transition. The enable then completes with the claim consumed: the scheduler stays up but can never be disabled again, and bpf_scx_unreg() frees it while still in use, resulting in a use-after-free. Both WARN_ON_ONCE()s fire back to back: WARNING: kernel/sched/ext/ext.c:7522 at scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276 WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8, CPU#0: sched_ext_helpe/664 scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler allocation, so ops->priv is never visible while SCX_DISABLED. The allocation failure path restores SCX_DISABLED. | ||||
| CVE-2026-98221 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix tpm2_load_cmd() boundary check tpm2_load_cmd() does boundary checks against the ASN.1 size i.e., payload->blob_len. Address this by passing the decoded blob size to tpm2_load_cmd(), and use it for the boundary checks. | ||||
| CVE-2026-98222 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores datablob_len in a u16. It is computed from multiple string and payload lengths. If the result exceeds U16_MAX, the assignment truncates the allocation size. KASAN reports a 32760-byte slab-out-of-bounds write when __ekey_init() copies the master key description into the undersized buffer. The total payload length stored in key->datalen is also a u16. Use check_add_overflow() to reject values that do not fit either destination, and use kzalloc_flex() for the flexible-array allocation. | ||||
| CVE-2026-98247 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: validate vendor codec count length The Read Local Supported Codecs parsers consume the variable-sized standard codec array before parsing the vendor codec count. Although the initial reply-size check includes a vendor count byte in the fixed layout, it does not guarantee that the byte remains after the standard codec array. If a controller reply ends immediately after that array, calculating the vendor codec array size reads vnd_codecs->num beyond the skb data. Use skb_pull_data() to validate and consume each codec header before using its count in both command variants. | ||||