Export limit exceeded: 106691 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (106691 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64561 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Check for invalid/obsolete root *after* making MMU pages available Check for a "stale" page fault, i.e. for an invalid and/or obsolete root, after making MMU pages available for the shadow MMU. If reclaiming shadow pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to map memory into an invalid root. On its own, populating an invalid root is "fine", but because child shadow pages inherit their parent's role, any children created during the map/fetch will be created as invalid pages, thus violating KVM's invariant that invalid pages are never on the list of active MMU pages. Note, the underlying flaw has existed since KVM first started tracking invalid roots in 2008 (commit 2e53d63acba7, "KVM: MMU: ignore zapped root pagetables"), but the true badness only came along in 2020 (Linux 5.9) with the invariant that invalid shadow pages can't be on the list of active pages. Note #2, inheriting role.invalid when creating child shadow pages is also far from ideal; that flaw will be addressed separately. | ||||
| CVE-2026-64560 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Prevent UAF caused by non-leader exec() race Wongi and Jungwoo decoded and reported a non-leader exec() related race which can result in an UAF: sys_timer_delete() exec() posix_cpu_timer_del() // Observes old leader p = pid_task(pid, pid_type); de_thread() switch_leader(); release_task(old_leader) __exit_signal(old_leader) sighand = lock(old_leader, sighand); posix_cpu_timers*_exit(); sighand = lock_task_sighand(p) unhash_task(old_leader); sh = lock(p, sighand) old_leader->sighand = NULL; unlock(sighand); (p->sighand == NULL) unlock(sh) return NULL; // Returns without action if(!sighand) return 0; free_posix_timer(); This is "harmless" unless the deleted timer was armed and enqueued in p->signal because on exec() a TGID targeted timer is inherited. As sys_timer_delete() freed the underlying posix timer object run_posix_cpu_timers() or any timerqueue related add/delete operations on other timers will access the freed object's timerqueue node, which results in an UAF. There is a similar problem vs. posix_cpu_timer_set(). For regular posix timers it just transiently returns -ESRCH to user space, but for the use case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is allocated on the stack. Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops to expire. While debating solutions Frederic pointed out another problem: posix_cpu_timer_del(tmr) __exit_signal(p) posix_cpu_timers*_exit(p); unhash_task(p); p->sighand = NULL; sh = lock_task_sighand(p) sighand = p->sighand; if (!sighand) return NULL; lock(sighand); if (!sh) WARN_ON_ONCE(timer_queued(tmr)); On weakly ordered architectures it is not guaranteed that posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit() when p->sighand is observed as NULL, which means the WARN() can be a false positive. Solve these issues by: 1) Changing the store in __exit_signal() to smp_store_release(). 2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path of lock_task_sighand(). 3) Creating a helper function for looking up the task and locking sighand which does not return when sighand == NULL. Instead it retries the task lookup and only if that fails it gives up. 4) Using that helper in the three affected functions. #1/#2 ensures that the reader side which observes sighand == NULL also observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit() and the ones in unhash_task(). #3 ensures that the above described non-leader exec() situation is handled gracefully. When the task lookup returns the old leader, but sighand == NULL then it retries. In the non-leader exec() case the subsequent task lookup will observe the new leader due to #1/#2. In normal exit() scenarios the subsequent lookup fails. When the task lookup fails, the function also checks whether the timer is still enqueued and issues a warning if that's the case. Unfortunately there is nothing which can be done about it, but as the task is already not longer visible the timer should not be accessed anymore. This check also requires memory ordering, which is not provided when the first lookup fails. To achieve that the check is preceeded by a smp_rmb() which pairs with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that the stores in posix_cpu_timers*_exit() are visible. The history of the non-leader exec() issue goes back to the early days of posix CPU timers, which stored a pointer to the group leader task in the timer. That obviously fails when a non-leader exec() switches the leader. commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems with mt exec") added a temporary workaround for that in 2010 which surv ---truncated--- | ||||
| CVE-2026-64559 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in PKEY_VERIFYPROTK ioctl Explicitly check the buffer length request structure provided by user-space and fail, if it exceeds the buffer size. | ||||
| CVE-2026-64558 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in pkey_pckmo handler implementation Explicitly check the length of the target buffer in the pkey_pckmo implementation of the key_to_protkey() handler function. The handler function fails, if the generated output data exceeds the length of the provided target buffer. | ||||
| CVE-2026-64557 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb() l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after release_sock(parent). Once the parent lock is dropped the newly enqueued child socket sk is reachable via the accept queue, so another task can accept and free it before the callback dereferences sk, resulting in a use-after-free. Rework the ->new_connection() op so the core, rather than the callback, owns the child channel's lifetime. The op now receives a pre-allocated new_chan and returns an errno instead of allocating and returning a channel. l2cap_new_connection() allocates the child channel and links it into the conn list via __l2cap_chan_add() before invoking the callback, so the conn-list reference keeps the channel alive once release_sock(parent) exposes the socket to other tasks. Channel configuration that was duplicated in l2cap_sock_init() and the various new_connection callbacks is consolidated into l2cap_chan_set_defaults(), which now inherits from the parent channel when one is supplied. | ||||
| CVE-2026-64556 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Detach event groups during remove_on_exec perf_event_remove_on_exec() removes events by calling perf_event_exit_event(). For top-level events, this removes the event from the context with DETACH_EXIT only. This can leave inconsistent group state when a removed event is a group leader and the group contains siblings without remove_on_exec. If the group was active, the surviving siblings can remain active and attached to the removed leader's sibling list, but are no longer represented by a valid group leader on the PMU context active lists. A later close of the removed leader uses DETACH_GROUP and can promote the still-active siblings from this stale group state. The next schedule-in can then add an already-linked active_list entry again, corrupting the PMU context active list. With DEBUG_LIST enabled, this is caught as a list_add double-add in merge_sched_in(). Fix this by detaching group relationships when remove_on_exec removes an event. This preserves the existing task-exit and revoke behavior, while ensuring surviving siblings are ungrouped before the removed event leaves the context. | ||||
| CVE-2026-64554 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment() br_ip6_fragment() gets prevhdr, a pointer into the skb head, from ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb skb_checksum_help() reallocates the head via pskb_expand_head(), leaving prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a use-after-free write. Save prevhdr's offset before skb_checksum_help() and recompute it after, like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6 fragment"). BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857) Write of size 1 at addr ffff888013ff5016 by task exploit/141 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip6_frag_next (net/ipv6/ip6_output.c:857) br_ip6_fragment (net/ipv6/netfilter.c:212) nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407) nf_hook_slow (net/netfilter/core.c:619) br_forward_finish (net/bridge/br_forward.c:66) __br_forward (net/bridge/br_forward.c:115) maybe_deliver (net/bridge/br_forward.c:191) br_flood (net/bridge/br_forward.c:245) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:442) ... packet_sendmsg (net/packet/af_packet.c:3114) ... do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-64552 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix len check in receive_big() receive_big() bounds the device-announced length by (big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose: add_recvbuf_big() sets sg[1] to start at offset sizeof(struct padded_vnet_hdr) into the first page, so the chain actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) + big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the check allows for the common hdr_len == 12 case. A malicious virtio backend can announce a len in that gap. page_to_skb() then walks one frag past the page chain, storing a NULL page->private into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds write past the static frag array and a NULL frag handed up the rx path. Bound len by the size add_recvbuf_big() actually advertised. | ||||
| CVE-2026-64548 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data() When the scatterlist ring is full or nearly full, bpf_msg_push_data() enters a copy fallback path and computes copy + len for the page allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING and both are u32, a crafted len can wrap the sum to a small value, causing an undersized allocation followed by an out-of-bounds memcpy. BUG: unable to handle page fault for address: ffffed104089a402 Oops: Oops: 0000 [#1] SMP KASAN NOPTI Call Trace: __asan_memcpy (mm/kasan/shadow.c:105) bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788) bpf_prog_9ed8b5711920a7d7+0x2e/0x36 sk_psock_msg_verdict (net/core/skmsg.c:934) tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584) __sys_sendto (net/socket.c:2206) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add an overflow check before the allocation. | ||||
| CVE-2026-64547 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: net1080: validate packet_len before pad-byte access in rx_fixup For an even packet_len, net1080_rx_fixup() reads the pad byte at skb->data[packet_len] before the skb->len != packet_len check further down, and packet_len is only bounded against NC_MAX_PACKET. A malicious NetChip 1080 device can send a short frame advertising a large even packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the skb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ... Reject the frame when packet_len >= skb->len before reading. | ||||
| CVE-2026-64546 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix OOB read in drm_parse_tiled_block() drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740) | ||||
| CVE-2026-64543 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free of the discoverer in tipc_disc_rcv() bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(), but tipc_disc_rcv() still dereferences b->disc in RX softirq under rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv). L2 bearers are safe thanks to the synchronize_net() in tipc_disable_l2_media(), but the UDP bearer defers that call to the cleanup_bearer() workqueue, so the discoverer is freed with no grace period: BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149) Read of size 8 at addr ffff88802348b728 by task poc_tipc/184 <IRQ> tipc_disc_rcv (net/tipc/discover.c:149) tipc_rcv (net/tipc/node.c:2126) tipc_udp_recv (net/tipc/udp_media.c:391) udp_rcv (net/ipv4/udp.c:2643) ip_local_deliver_finish (net/ipv4/ip_input.c:241) </IRQ> Freed by task 181: kfree (mm/slub.c:6565) bearer_disable (net/tipc/bearer.c:418) tipc_nl_bearer_disable (net/tipc/bearer.c:1001) The bearer is freed with kfree_rcu(); free the discoverer the same way. Add an rcu_head to struct tipc_discoverer and free it and its skb from an RCU callback. Because the RCU callback (tipc_disc_free_rcu) lives in module text, a call_rcu() that is still pending when the tipc module is unloaded would invoke a freed function. Add an rcu_barrier() to tipc_exit() after the bearer subsystem has been torn down, so all pending discoverer callbacks have run before the module text goes away. Reachable from an unprivileged user namespace: the TIPCv2 genl family is netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC and CONFIG_TIPC_MEDIA_UDP. | ||||
| CVE-2026-64532 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation} In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`, where e->view.data_off comes from an on-disk NTFS_DE inside an INDEX_ROOT or INDEX_BUFFER. Neither case validates view.data_off + dlen against e->size; the existing check_if_index_root / check_if_alloc_index helpers walk the entry chain and validate the entry's offset, but not its internal view fields. The neighbouring read sites (e.g., fs/ntfs3/index.c when iterating view entries) check view.data_off + view.data_size <= e->size. Apply the same bound at the two memmove sites. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe instrumentation: with view.data_off forced to 0xFFFC, the memmove writes 32 bytes past the end of the NTFS_DE. This is similar in shape to Pavitra Jha's 2026-05-02 patch "fs/ntfs3: prevent oob in case UpdateRecordDataRoot" (<20260502105008.21827-1-jhapavitra98@gmail.com>) which proposes calling ntfs3_bad_de_range(); that helper does not exist in mainline. This patch uses inline checks. | ||||
| CVE-2026-64531 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject oversized nested action attrs Open vSwitch stores generated flow actions as nlattrs, whose nla_len field is u16. Commit a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") allowed the total sw_flow_actions stream to grow beyond 64 KiB, which is valid, but also removed the last guard preventing a generated nested action attribute from exceeding U16_MAX. An oversized generated container can thus be closed with a truncated nla_len. A later dump or teardown then walks a structurally different stream than the one that was validated. In particular, an oversized nested CLONE/CT action may cause subsequent bytes in the generated stream to be interpreted as independent actions. Keep the larger total-action-stream behavior, but make nested action close reject generated containers that do not fit in nla_len, and return the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse construction order before discarding failed wrappers, so resources copied into the rejected tails are released before the wrappers are removed. Most failed outer wrappers are discarded by truncating actions_len after child resources have been released. CHECK_PKT_LEN also trims its parent after branch resources are gone. SET/TUNNEL close failures unwind their known tun_dst ownership directly, and SET_TO_MASKED has no external ownership and truncates on close failure. | ||||
| CVE-2026-64529 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. | ||||
| CVE-2026-64522 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock. | ||||
| CVE-2026-64515 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix MLE defragmentation If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines. | ||||
| CVE-2026-64510 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on driver removal, any subsequent ACPI MCE will lead to a use-after-free like in the previous case. To address the first issue mentioned above, make acpi_nfit_probe() call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and to address the other one, add a remove callback to the driver and make it call acpi_nfit_shutdown(). Also, since it is now possible to pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it may not have been initialized, add checks against NULL for acpi_desc and its nvdimm_bus field to that function and make acpi_nfit_unregister() clear the latter after unregistering the NVDIMM bus. | ||||
| CVE-2026-64496 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. | ||||
| CVE-2026-64490 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA. | ||||