Export limit exceeded: 410587 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410587 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410587 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98464 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and destroys the VM supplies the teardown side of the race; no post-launch host ioctl is needed to arm or request teardown. On upstream master 62cc90241548, generic KASAN reported: BUG: KASAN: slab-use-after-free in do_raw_spin_lock Write of size 4 at addr ff60000005e58898 kvm_riscv_vcpu_set_interrupt kvm_riscv_vcpu_hrtimer_expired __hrtimer_run_queues hrtimer_interrupt The object was allocated by KVM_CREATE_VCPU and freed concurrently by: kvm_destroy_vcpus kvm_arch_destroy_vm kvm_destroy_vm __fput For deterministic validation, I added mdelay(1000) immediately after the existing next_set = false assignment. This only widens the existing post-clear callback window. A no-delay trace build naturally reached the callback-after-teardown-start/before-deinit ordering in 12 of 200 runs, but 1,500 stock-kernel stress iterations did not produce a KASAN report, so natural reproduction is timing-sensitive. Always invoke hrtimer_cancel() for an initialized timer. Preserve the existing -EINVAL result when the timer is no longer set, but only after synchronizing with a running callback. With this patch, hrtimer_cancel() blocked for the full widened callback window before vCPU destruction. KASAN reported no error in 100 fixed-and-widened runs or 200 fix-only timing-sweep runs. | ||||
| CVE-2026-98463 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the moved task was woken up, although no task_woken_scx() follows that activation. An IMMED insert into a busy destination requests a local reenqueue during that enqueue. The request gets linked but not scheduled and stays pending until an unrelated wakeup or preemption on that CPU runs the deferred actions. The IMMED task sits behind the running task in the meantime. If nothing runs them before the scheduler is disabled, the request outlives the scheduler and points into its freed per-cpu area, which the next scheduler dereferences from run_deferred(). Test the core enqueue flags for the wakeup bit. Only the core's wakeup path is followed by task_woken_scx(). | ||||
| CVE-2026-98462 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix CIS hold ownership on reuse Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via hci_conn") made hci_bind_cis() and hci_connect_cis() return a connection with one hold for the ISO layer. hci_bind_cis() currently takes that hold only after configuring a CIS, so its BT_CONNECTED and matching BT_BOUND paths return a bare lookup result. Its configuration failure path can likewise call hci_conn_drop() before taking a hold. Take the hold before any state-dependent return or configuration error so every successful return follows the documented ownership contract and every error drop is balanced. hci_connect_cis() also assumes hci_conn_link() always takes a new CIS hold before dropping the one returned by hci_bind_cis(). However, the helper returns an existing link without taking another hold. In that case, preserve the CIS hold for the caller and drop the redundant LE hold because the existing link already owns its parent hold. Returning early also avoids changing an existing CIS back to BT_CONNECT. | ||||
| CVE-2026-98461 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode. | ||||
| CVE-2026-98460 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command. | ||||
| CVE-2026-98459 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink(). | ||||
| CVE-2026-98458 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put. | ||||
| CVE-2026-98457 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes remain, the subtraction wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS load reads past the logical end of the frame. Validate that the frame contains both its control field and, when enabled, its FCS before either field is accessed. | ||||
| CVE-2026-98456 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers. | ||||
| CVE-2026-98455 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: <TASK> do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98453 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: close handle after create-context parsing failure SMB2_open() accounts a successful CREATE response as a remote open before parsing its create contexts. If smb2_parse_contexts() rejects malformed context data, SMB2_open() returns without closing the handle, leaving the server-side handle open and num_remote_opens elevated. Close the handle after a post-CREATE context parsing failure so the error path releases the remote resource and balances the open count. | ||||
| CVE-2026-98452 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clean up failed cached directory opens open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If the CREATE succeeds but a later command returns an error, the function must retain the CREATE FID so common cleanup can issue SMB2_close(). It also must not treat a response error as a valid CREATE. Validate the CREATE response before using its fields, record the FIDs, and mark the handle open before handling errors from later compound commands. Move the -EREMCHG reconnect handling before response validation so a missing response does not hide the reconnect request. Count the handle when it is marked open; confirmed close responses decrement the counter, while existing close retry behavior remains best effort on transport failures. | ||||
| CVE-2026-98451 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails. | ||||
| CVE-2026-98450 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: close completed creates on compound wait errors compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior. | ||||
| CVE-2026-98449 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again. | ||||
| CVE-2026-98448 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: xfs: release orphanage dir inode if chown fails LOLLM points out that we leak the igrab'd reference to the orphanage directory inode if chowning it fails. Fix that. | ||||
| CVE-2026-98447 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots LOLLM noticed that the inode btree root formatting methods copy too many bytes -- there's only one set of keys in node blocks, not two. This causes memory corruption of whatever's beyond the buffers. | ||||
| CVE-2026-98446 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't let hidden_space go negative in xfs_metafile_resv_init LOLLM points out that if the amount of fdblocks that we can reserve for a metadata btree file goes below the space already used by that file, then the hidden_space subtraction can underflow, causing xfs_dec_fdblocks to subtract a huge amount of space. We never want the target to be less than the used sapce, so fix the logic that adjusts dblocks_avail downwards. Also fix an error in the adjacent comment. | ||||
| CVE-2026-98445 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't let memory failures leak blocks and kill repairs LOLLM complains that a memory allocation failure in xrep_newbt_add_blocks results in online repair leaking blocks that were previously allocated to write a new btree, but the problem is worse than that -- a limitation of the codebase is that the callers cannot undo the transaction /and/ return the error -- either you undo all changes and commit the transaction, or you error out and the filesystem goes down. However, the new btree space reservation object isn't that big (~48 bytes). Let's just do a NOFAIL allocation and the problem goes away. | ||||