Export limit exceeded: 412519 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412519 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412519 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412519 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-76788 | 1 Zephyrproject | 1 Zephyr | 2026-10-20 | 8.8 High |
| The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound. The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted. With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination. | ||||
| CVE-2026-76787 | 1 Zephyrproject | 1 Zephyr | 2026-10-20 | 5.9 Medium |
| The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only. | ||||
| CVE-2026-71563 | 2 Apache, Apache Software Foundation | 2 Answer, Apache Answer | 2026-10-20 | 4.3 Medium |
| Missing Authorization vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. An authorization flaw in the MCP answer retrieval tool allows holders of a global API key to access answer content associated with hidden, deleted, or pending-review questions. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | ||||
| CVE-2026-69080 | 2 Apache, Apache Software Foundation | 2 Apache Kylin, Apache Kylin | 2026-10-20 | 7.5 High |
| Exposure of SQL Black List to an Unauthorized Actor vulnerability in Apache Kylin. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | ||||
| CVE-2026-69077 | 2 Apache, Apache Software Foundation | 2 Apache Kylin, Apache Kylin | 2026-10-20 | 7.5 High |
| Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | ||||
| CVE-2026-68498 | 1 Fasterxml | 1 Jackson-core | 2026-10-20 | 7.5 High |
| StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default. In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory. A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration. Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes. This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. | ||||
| CVE-2026-64943 | 2 Apache, Apache Software Foundation | 2 Answer, Apache Answer | 2026-10-20 | 8.1 High |
| Insertion of Sensitive Information into Log File vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Full API keys are written to application logs on every authenticated request, allowing anyone with log-read access to recover and replay active bearer credentials. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | ||||
| CVE-2026-43840 | 1 Advantech | 1 Adam-3600 | 2026-10-20 | N/A |
| A NULL pointer dereference vulnerability in the license manager service could allow an unauthenticated attacker to crash the service via the on_disconnected callback function. | ||||
| CVE-2026-15957 | 2 Amazon, Aws | 2 Aws-sdk-rust, Aws-sdk-rust | 2026-10-20 | 7.5 High |
| Smithy-RS is a Rust code generation and runtime framework that generates HTTP clients and servers from Smithy interface definitions, powering the AWS SDK for Rust and custom service implementations. Uncontrolled recursion in the JSON, CBOR, and XML deserializer functions emitted by Amazon smithy-rs code generation could allow remote attackers to cause a denial of service (process abort via stack exhaustion) via a small request containing deeply nested data for a recursive model shape to a generated SDK or server. To mitigate this issue, users should upgrade to aws-sdk-rust release-2026-06-02 or later. Users building custom servers with smithy-rs codegen should regenerate from smithy-rs release-2026-06-01 or later. | ||||
| CVE-2026-11400 | 1 Aws | 1 Aws Advanced Jdbc Wrapper | 2026-10-20 | 8 High |
| An untrusted search path issue in the GlobalDatabasePlugin in the AWS Advanced JDBC Wrapper for Amazon Aurora PostgreSQL will allow a remote authenticated low-privilege actor to escalate privileges to those of another Amazon RDS user, including rds_superuser, via a crafted function created by the actor that runs when that user connects to the cluster through an affected wrapper. To remediate this issue, users should upgrade to AWS Advanced JDBC Wrapper version 4.0.1. | ||||
| CVE-2026-113677 | 1 Froxlor | 1 Froxlor | 2026-10-20 | 5.4 Medium |
| Froxlor from 0.10.0 before 2.3.15 contains a missing authorization vulnerability in the SubDomains.delete API command that allows authenticated customers to delete reseller-provisioned main domains by supplying a main domain id. Attackers can bypass the web UI restriction to remove domains, orphan vhost, DNS and subdomain records, and drive subdomains_used below zero to gain extra subdomain allowance. | ||||
| CVE-2026-113610 | 2 Vatesfr, Xen-orchestra | 2 Xen-orchestra, Xen Orchestra Server | 2026-10-20 | 5.4 Medium |
| Xen Orchestra before 6.9.0 contains an authorization bypass vulnerability in the xo-server user.set API method that allows low-privileged authenticated users to modify other users' preferences by supplying an arbitrary target user id. Attackers can delete the preferences.otp TOTP secret to disable two-factor authentication, corrupt it to block logins, or overwrite stored xsCredentials and sshKeys. | ||||
| CVE-2026-113605 | 1 Stirling | 1 Stirling Pdf | 2026-10-20 | 7.2 High |
| Stirling-PDF from 2.13.2 through 3.2.0 contains an incomplete denylist in DatabaseService.validateSqlContent() that allows administrators to bypass H2 import restrictions using CREATE OR REPLACE ALIAS. Authenticated administrators can upload a crafted SQL backup to the import-database endpoint, where RUNSCRIPT defines H2 Java function aliases and restores Java-method execution. | ||||
| CVE-2026-113469 | 1 Stormshield | 1 Stormshield Network Security | 2026-10-20 | 7.5 High |
| A failure has been identified in the SNS during dynamic data files signature check. A logic error in the signature verification routine resulting in acceptance of unauthenticated dynamic data update during Autoupdate routine. | ||||
| CVE-2026-112161 | 1 Mobatek | 1 Mobaxterm | 2026-10-20 | N/A |
| MobaXterm Personal Edition (Portable) 26.4 GA extracts the CygUtils64.plugin file without first verifying its integrity. A local attacker with write permissions on this file can replace the ‘bin/cygwin1.dll’ library contained within it with a malicious library. When the victim opens a Local Shell session or uses a Cygwin-based function, the application extracts the component and loads the tampered library, executing code with the victim’s permissions. Exploitation requires write access to the plugin and does not, in itself, involve privilege escalation. | ||||
| CVE-2026-110759 | 2026-10-20 | 9.8 Critical | ||
| Text::CSV_XS versions before 1.65 for Perl return a 0xFF byte that is not in the input for an empty last field followed by a lone CR in parse. When the input to parse ends in a separator and a lone CR, the parser treats the end of the input as the next character and stores the end-of-file marker in the field as the byte 0xFF. With binary set, parse("a,\r") returns the fields "a" and "\xFF". On UTF-8 flagged input the last field is a UTF-8 flagged string holding that lone byte, which is malformed UTF-8. The same input with a non-empty last field is rejected as an error. A CRLF file read line by line and chomped ends this way when its last column is empty, so the application receives a byte that is not in its input. | ||||
| CVE-2026-110758 | 2026-10-20 | 7.5 High | ||
| Text::CSV_XS versions before 1.65 for Perl read before the start of an all-blank field under allow_whitespace in strip_trail_whitespace. Under allow_whitespace, strip_trail_whitespace removes trailing spaces and tabs from each unquoted field without stopping at the start of the field. For a field of only blanks it reads the byte before the field's heap buffer. If that byte is also a space or tab, it may be zeroed and the walk continue backwards, depending on what the allocator placed there. Leading blanks are normally skipped before a field is stored, but an all-blank field still arrives after a leading escape_char that differs from quote_char, or as a quoted field in getline when its line ends in two CRs. | ||||
| CVE-2026-110757 | 2026-10-20 | 9.8 Critical | ||
| Text::CSV_XS versions before 1.65 for Perl allow record splitting by writing strings used as numbers without quotes in combine. combine and print do not check whether a field needs quotes when its value has Perl's integer or numeric flag set. Perl sets these flags on a string used in a numeric operation when it parses as a number, which allows leading and trailing whitespace. With binary set, as csv does by default, "12\n" passes a check such as $qty > 0 and is then written unquoted with its newline. A value validated as a number can end the record early and turn the fields after it into a separate row. | ||||
| CVE-2026-110756 | 2026-10-20 | 9.8 Critical | ||
| Text::CSV_XS versions before 1.65 for Perl drop the end of a record and its line ending when a UTF-8 flagged field precedes invalid UTF-8 bytes in print. When a record contains a UTF-8 flagged field, print holds back trailing bytes that are not valid UTF-8 at each buffer flush, so that a character split across two flushes can be completed. Nothing writes the held-back bytes after the record's final flush. A record whose last field ends in such a byte loses it, any closing quote and the line ending, while print still returns true. combine is not affected. The next record is written onto the same line, or, when the last field was quoted, the missing closing quote makes a reader take every following record as part of that field. | ||||
| CVE-2026-110755 | 2026-10-20 | 7.5 High | ||
| Text::CSV_XS versions before 1.65 for Perl allow quadratic CPU use by copying the unparsed remainder per record of CR-only input in getline. With eol unset, the default, getline reads with Perl's default line separator, so input with CR-only line endings arrives as one chunk. After each record the parser copies the whole unparsed remainder into a new buffer, which the next call parses and copies again, so the work grows with the square of the input size. A reader with default options that is sent CSV with classic Mac line endings spends seconds of CPU time on a megabyte of input. | ||||