| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short beacon and probe responses
libipw_process_probe_response() and the libipw_network_init() call it
makes assume the frame contains the full 36-byte beacon and probe
response prefix, but the ipw2100 and ipw2200 receive paths only
establish that a management frame carries the generic 24-byte
three-address header.
libipw_network_init() then computes the information element length as
stats->len - sizeof(*beacon)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() yields
65524 for a 24-byte beacon, and the parser then walks the receive
buffer as if it held almost 64 KiB of information elements, reading
past the allocation.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: encrypted: fix integer overflow of datablob_len
encrypted_key_alloc() stores datablob_len in a u16. It is computed from
multiple string and payload lengths. If the result exceeds U16_MAX, the
assignment truncates the allocation size. KASAN reports a 32760-byte
slab-out-of-bounds write when __ekey_init() copies the master key
description into the undersized buffer.
The total payload length stored in key->datalen is also a u16. Use
check_add_overflow() to reject values that do not fit either destination,
and use kzalloc_flex() for the flexible-array allocation. |
| Integer Overflow to Buffer Overflow vulnerability in Samsung Open Source rlottie allows Overflow Buffers. |
| MKVToolNix through 101.0 contains a heap buffer overflow in the bundled avilib library's ODML superindex parser due to integer wraparound in 32-bit arithmetic. Attackers can craft a malicious AVI file with oversized entry counts that cause an undersized heap allocation, allowing a heap buffer overflow when the file is parsed with mkvmerge. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in acpi_ps_get_next_field()
Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate AV1 tile counts
The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop
bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[]
arrays, as the divisor for context_update_tile_id, and their product
bounds the per-tile descriptor buffers, but std_validate_compound() does
not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose
tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose
product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the
consuming driver so the zero-initialised control that existing userspace
submits is still accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reject invalid states in connection template sync records
IPVS sync receivers validate protocol states before creating or updating a
connection. For connection templates, however, they only log states outside
the template state range and still store the value in the connection.
A template can be returned by ordinary connection lookup. TCP and SCTP then
use the invalid state as an index into their transition tables.
Reject invalid template states in both sync protocol versions before
looking up or modifying a connection. The version 1 path handles both
IPv4 and IPv6 records. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fail DACL rewrite when the new DACL exceeds 64K
replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of
the DACL they build in a u16. That accumulator can wrap.
validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) /
20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can
grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with
one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is
therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond
what a u16 can hold. A wraparound is reached with 863 ACEs.
After the wraparound, ndacl_ptr->size becomes meaningless and the offset
will point anywhere in the ACE array. As a result, we will see
corruption of the DACL, which then gets sent to the server. This is not
an out-of-bounds write as the allocation now covers the worst-case
expansion, so writes will always go into the buffer.
Adjust the code to use a u32 internally and return -EOVERFLOW in the
overflow case. The operation must be refused, because a DACL can only
hold 2^16-1 bytes on the wire and larger DACLs cannot be represented.
set_chmod_dacl() carries the same pattern and is fixed the same way. It
only wraps once the source DACL comes within roughly 380 bytes of the
64K ceiling, but the failure mode is identical. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix handling of damaged volume in exfat_create_upcase_table()
When the size of the upcase table is set to zero in the dentry for any
reason(e.g. corrupted media or misbehaving device), an integer overflow
causes the module to loop indefinitely.
If the size of the upcase table is read zero, do not attempt to load the
table. Instead, fallback to loading the default upcase table. If the
size of the upcase table is zero or no upcase table is found, raise
exfat_fs_error() to mark the volume read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: properly decrypt filenames in vmalloc() buffers
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting in oopses especially on non-x86 platforms
(see 'Closes:' for more details and a reproducer).
Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated
fname->ctext, fname->name, and/or oname->name buffers, using `tname`
(which, when non-null, must be a linear address; when null, is briefly
allocated as necessary) as a bounce buffer to avoid passing any
inappropriate addresses to fscrypt_fname_disk_to_usr().
Additionally change parse_reply_info_readdir() -- the only function to
supply its own `tname` -- to follow the new "tname must never come from
vmalloc()" rule by passing NULL when the message is not in the linear
region. Though this causes a per-dentry kmalloc()+kfree(), this overhead
exists only when processing the minority of messages that spill into
vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir
messages. Still, if the overhead proves unreasonable in the future, it
is easy enough to mitigate: a future change could allocate a bounce
buffer in parse_reply_info_readdir() and use that as `tname` instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| An integer overflow was addressed with improved input validation. This issue is fixed in Safari 26.6.1, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. Processing maliciously crafted web content may lead to memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: Ensure that TCP packets don't overflow gso_segs
The user can specify any gso_size in a packet crafted with an AF_PACKET
PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the
same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user
crafts a packet with gso_size < 8, there is a risk for partial GSO to
overflow the 16-bit gso_segs field when dividing the SKB length by
gso_size.
Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep
gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly
tested at tools/testing/selftests/net/tun.c:649. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98
Same for the XDP branch:
256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_codel: clamp default quantum and mtu
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum before hhf_change() to avoid overflow
hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow
check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting
MTU 2147483634) makes weight * quantum overflow the signed deficit in
hhf_dequeue(), spinning forever.
Clamp q->quantum before hhf_change() so both the opt and !opt paths see
a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with
a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option
present) fails with -EINVAL because hhf_change() re-validates the
unclamped default (sch_hhf.c:559). 256 matches fq_codel's floor and is
a sane minimum for a DRR quantum.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
