| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In stpropnci_process of stpropnci.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A flaw has been found in XnView Classic 2.52.5. Impacted is an unknown function of the component FLI File Parser. This manipulation of the argument starting_line causes heap-based buffer overflow. Remote exploitation of the attack is possible. Upgrading to version 2.52.6 is recommended to address this issue. Upgrading the affected component is advised. |
| In multiple functions of rw_t5t.cc, there is a possible out-of-bounds read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of nfa_nfcee_act.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Bound fragmented header copies by the remaining length
siw_get_hdr() can receive an extended DDP/RDMAP header across more than
one TCP callback. The first callback may receive most of the header,
while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead
of the number of missing bytes. This makes the destination move past the
end of the header and overwrite the receive state, including
fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd
value as a copy offset, which creates an OOB write.
Use the number of header bytes already received when calculating the
next copy length. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix UAF in lbtf_free_adapter()
lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command
buffers before calling timer_delete_sync() to wait for the command
timer callback. If the timer callback (command_timer_fn) is already
running when lbtf_free_cmd_buffer() frees the command array, the
callback dereferences priv->cur_cmd->cmdbuf which points to freed
memory.
Swap the order so that timer_delete_sync() runs first, ensuring any
in-flight callback has completed before the command buffers are freed. |
| In wacom_hid_set_device_mode of wacom_sys.c, there is a possible out-of-bounds write due to a missing bounds check. This could lead to physical escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
| A buffer overflow vulnerability exists in the OnGuard agent of ClearPass Policy Manager. Successful exploitation could allow an authenticated local user to execute arbitrary code with elevated privileges on the affected host or to disrupt the availability of the affected service. |
| A heap-based buffer overflow was found in GIMP’s DirectDraw Surface (DDS) loader. When loading a crafted DDS image, buffer sizes derived from width, height, and pitch can be computed using 32-bit arithmetic that overflows. The allocated buffer is too small for the amount of pixel data written through GEGL (CWE-787), following integer overflow in size calculations (CWE-190). This may allow heap corruption and, in the worst case, arbitrary code execution in the context of the GIMP process. |
| Memory corruption vulnerabilities exist in AOS-S that are reachable by an unauthenticated adjacent attacker. Successful exploitation could allow an attacker to execute arbitrary code. |
| Buffer overflow vulnerabilities exist in the affected interface of AOS-S. Successful exploitation could allow an unauthenticated remote attacker to expose sensitive memory contents and cause a denial of service on the device. |
| An unauthenticated buffer overflow vulnerability exists in AOS-S. Successful exploitation could allow an unauthenticated adjacent attacker to expose sensitive memory contents and cause a denial of service on the affected device. |
| A heap-based buffer overflow was found in GIMP’s DICOM export plug-in. When exporting an image with extremely large width and height, the export path allocates a buffer using a 32-bit width * height (and bytes-per-pixel) product that can overflow. GEGL then writes the full uncompressed extent into the undersized buffer (CWE-787), after integer overflow in the allocation size |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_tunnel: initialize `options_len` before referencing options
The following command triggers a kernel panic:
ip link add d0 type dummy; ip link set d0 up
ip route add 10.30.0.0/16 \
encap ip id 300 geneve_opts 4660:66:11223344 dev d0
memcpy: detected buffer overflow: 4 byte write of buffer size 0
kernel BUG at lib/string_helpers.c:1044!
...
ip_tun_parse_opts.part.0.cold+0x10/0x10
ip_tun_build_state+0x116/0x2a0
On kernels built with GCC 15+ and `CONFIG_FORTIFY_SOURCE`, the fortified
`memcpy()` got 0 sized destination with request of 4 bytes length:
static int ip_tun_parse_opts_geneve(...)
{
...
attr = tb[LWTUNNEL_IP_OPT_GENEVE_DATA];
data_len = nla_len(attr); /* == 4 */
struct geneve_opt *opt = ip_tunnel_info_opts(info) + opts_len;
memcpy(opt->opt_data, nla_data(attr), data_len);
/* ^^^^^^^^^^^^^ 0 since options_len is assigned afterwards */
Fixed by initializing the counter before the options are referenced.
Matching what `tunnel_key_opts_set()` already does. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: prevent buffer overflow in page_pool allocation
The per‑processor buffering scheme is supported only if the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8).
This is already checked in mvpp2_probe() during the initial
activation of percpu_pools.
However, mvpp2_change_mtu() may later call
mvpp2_bm_switch_buffers(priv, true) without this check, which can
lead to an out-of-bounds access in the priv->page_pool array in
mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ
entries, and mvpp2_get_nrxqs() may return exactly that value. The
per-CPU scheme then doubles it to nrxqs * 2, exceeding the array
bounds.
Check that the hardware version is MVPP22 or newer and that the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS
before switching to per-CPU mode.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate curve data length in the calibration curve converters
p54_convert_rev0() and p54_convert_rev1() read calibration curve
data from the device-supplied EEPROM entry using channel and
points-per-channel counts taken verbatim from that same entry, so
an entry that declares more data than it carries drives an
out-of-bounds read past the EEPROM buffer (verified with a KASAN
reproducer of the conversion loop). The sibling converters
p54_convert_output_limits() and p54_convert_db() already validate
their counts against the entry length; this path was missed.
Reject the entry when the counts do not fit in the entry data. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi_cdl_enable() uses length fields returned by MODE SENSE to locate
the ATA feature mode page in a 64-byte stack buffer. A target can report
a total length shorter than its mode header and block descriptors. The
unsigned subtraction used for the MODE SELECT length can wrap, and the
separately computed buf_data can point beyond buf.
During automatic scan, enable is false, so the read-modify-write of
buf_data[4] can clear the low two bits of a target-selected
out-of-bounds stack byte. scsi_mode_select() can then copy up to 64
bytes from outside the buffer into the outgoing MODE SELECT payload,
disclosing stack contents to the target.
This is reachable while scanning a USB storage device that identifies as
an ATA device and advertises CDL support. No filesystem mount or
userspace access to the block device is required.
On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific,
one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator
sampling executed a fixed proof command inside the guest and created a
UID-0-owned marker during automatic enumeration, with KASLR and NX
enabled.
The issue was independently found during security research at Drivesec
S.r.l.
Cap the available length to the buffer size. Validate and consume the
mode header and block descriptor lengths before using the page, and
require the five bytes needed to access the CDL field. |
