| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: patch: fix handling of bpf-jit execmem addresses
Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text
is already writable") gated the core_kernel_text() branch of patch_map()
on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch
unchanged. That branch has a separate problem.
That branch only creates a temporary writable fixmap alias when
CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is
directly writable and returns the address unchanged. That assumption no
longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack
unconditionally in alloc_new_pack(), independently of any
CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only
regardless of what CONFIG_STRICT_MODULE_RWX says.
With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only
address directly, the subsequent copy_to_kernel_nofault() takes a
page fault and returns -EFAULT. bpf_arch_text_copy() turns that into
-EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the
WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed.
Note that BPF cannot be fixed the way kprobes was in
commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without
CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e.
writable at allocation time; the read-only mapping is established
afterwards by generic code in alloc_new_pack(), which arch code cannot
influence. The only place this can be handled is patch_map().
This is the same problem that was fixed on arm64 by commit b1480ed230ac
("arm64: patching: fix handling of execmem addresses"), and the fix is
the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc
area can hold executable memory that needs a temporary alias to be
written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select
it.
Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv
selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can
be disabled with CONFIG_MODULES=y as well, and the bug is reachable in
that configuration too.
The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set()
and __patch_insn_write() implementations and never calls patch_map(). |
| Pillow is a Python imaging library. From 12.0.0 until 13.0.0, Pillow's Image.merge() can dereference a null image8 plane. Validation skips the first input band, allowing a 32-bit integer or floating-point image backed by image32 storage to be merged as a narrower multiband image. A crafted IPTC file can reach this path when an application opens and loads it, or a caller can invoke Image.merge() directly with such a first band. This causes a native process crash. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can enter an infinite loop while rewriting PDF pages. PdfParser.rewrite_pages() follows Parent relationships without detecting a cycle in the page tree. An attacker can supply a cyclic PDF to an application that appends an image to that PDF. This can hold the worker at full CPU and deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow performs quadratic copying when saving a GIF with a long comment. _get_global_header() repeatedly copies portions of comment data while assembling the global header, including comments retained from an untrusted input image. An attacker can supply an image with a large GIF comment to an application that saves it as GIF. This can consume excessive CPU and delay or deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 4.1.0 until 13.0.0, Pillow's MSP RLE decoder can expand a small file into an unbounded in-memory buffer. The decoder writes run-length output to BytesIO without limiting expansion to the declared image size. An attacker can supply a crafted MSP image to an application that loads its pixels. This can exhaust memory and deny service even when the declared pixel count passes the decompression-bomb check. This issue is fixed in version 13.0.0. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.7, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Access Control vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the option length len. When a registered path segment is longer than the supplied URI and the URI is a prefix of it, the loop reads uri[len] and beyond, past the end of the option value.
The path is reached from coap_well_known_core_get_len() and coap_well_known_core_get() via match_queries_resource(), i.e. by any unauthenticated GET /.well-known/core?href=/<prefix> request to a device that serves /.well-known/core (for the CoAP server subsystem, CONFIG_COAP_SERVER_WELL_KNOWN_CORE, default y) and has at least one resource that declares struct coap_core_metadata attributes.
The over-read does not reach the receive buffer. The well-known-core builders parse the query into a stack-local struct coap_option, whose value is a fixed array (value[12], or CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE bytes) that the option bytes are copied into, so uri points into that copy. Reading past len therefore reads the unused, uninitialized tail of the array and, when the option fills it, the bytes just past it in the same stack frame. (In the ZoAP library of v1.8.0 to v1.9.x the option value was instead a pointer into the received packet, and the over-read ran past the option inside the packet buffer.)
The impact is bounded. The number of bytes read past the end is limited by the length of the resource path segment, and each additional byte is only read if it happens to equal the next path character, so in practice the over-read is one byte. It also cannot influence the response: returning a match requires the final compared index to be len - 1 or len, both in bounds, so out-of-bounds bytes only ever steer the loop to the next candidate resource. The consequence is undefined behaviour, not information disclosure and not a matching error.
The fix adds a k >= len guard at the top of the inner loop, so every uri[k] dereference is within the option value while still allowing a trailing * wildcard to match a longer path. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow takes quadratic time to reserve PDF object identifiers when saving many frames with save_all enabled. PdfParser.next_object_id() repeatedly rebuilds and scans all previously reserved identifiers for every object. An attacker can supply a multi-frame image, including a small APNG with a large declared frame count, to an application that converts it to a multipage PDF. This can consume excessive CPU and deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can exhaust resources while parsing an existing PDF during an append operation. PdfParser follows page-tree child references without cycle or duplication tracking and follows previous-trailer chains with only an exact repeated-offset guard, so deep or cyclic page trees and long chains of unique trailer offsets can exhaust the Python stack. Repeated non-cyclic /Kids references can also cause super-linear CPU and memory use. An attacker can supply such a PDF to an application that calls Image.save with PDF append enabled. This can raise an uncaught RecursionError or consume excessive CPU and memory before output is written, causing denial of service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's TIFF encoder can read beyond a ColorMap buffer when retained TIFF metadata has a plane size inconsistent with BitsPerSample. A small TIFF can be opened normally and then retain a crafted ColorMap that is reused when the image is saved. An application that re-encodes the attacker's TIFF with libtiff can trigger the out-of-bounds read. This can disclose heap memory in the output or crash the process. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.3.0 until 13.0.0, Pillow can return uninitialized memory as pixels when libtiff performs a short decode of JPEG-compressed or Group 4 fax TIFF data. The _decodeStrip and _decodeTile buffers can be larger than the bytes written by libtiff, but Pillow converts the expected rows without clearing the unwritten tail. The tile path is affected from 5.3.0 and the strip path from 6.0.0. An attacker can supply a crafted TIFF to an application that loads and returns or re-encodes its pixels. This can disclose stale heap contents without memory corruption or a process crash. This issue is fixed in version 13.0.0. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Pillow is a Python imaging library. From 2.6.0 until 13.0.0, Pillow is vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe absolute path, so a name beginning with a hyphen can be interpreted as a Ghostscript option. An attacker who controls the filename can inject Ghostscript arguments. Arbitrary command execution specifically requires a leading @ argument-file filename and control of the referenced text file containing additional Ghostscript arguments; the reported chain reproduces with the default -dSAFER invocation. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's XBM header parser is vulnerable to regular-expression denial of service. In XbmImageFile._open, when an application calls Image.open() on a small crafted XBM file, XbmImagePlugin applies a backtracking expression to the attacker-controlled header before image dimensions are accepted, stalling a worker for minutes and denying service. This issue is fixed in version 13.0.0. |
| A flaw has been found in Saruf-Ratul HR-Payroll-Management-System e7cd81477001afdee95b843fd4137894d9418c9f/3fd6f45ead9f8197510c0910f759e06ee67251e5. Affected by this vulnerability is an unknown functionality of the file chat.php. Executing a manipulation of the argument ID can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been published and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet. |
| The Qode Membership plugin for WordPress is vulnerable to Authentication Bypass leading to Account Takeover in all versions up to, and including, 2.0.6.2 via the qode_membership_check_facebook_user AJAX action. This is due to a typographic error in the Facebook OAuth token verification guard within the qode_membership_login_user_from_social_network function — the guard condition tests an undefined variable ($check_social_useqoder instead of $check_social_user), causing empty() to always return true and rendering the Graph API token verification branch dead code, leaving wp_set_auth_cookie() reachable with no credential or token validation whatsoever. This makes it possible for unauthenticated attackers to log in as any existing WordPress account — including Administrator-level accounts — by supplying a known or enumerated administrator login name (rather than an email address) in the response[email] parameter, which the fallback path in get_user_by('login', $email) resolves to the matching account. Exploitation does require harvesting a valid qode_validate_facebook_login nonce, but this nonce is rendered on any public front-end page containing the [qode_user_login] or [qode_user_register] shortcode and is therefore obtainable without any prior authentication. |
| A security flaw has been discovered in ggml-org llama.cpp up to 0.7.0. Affected by this vulnerability is an unknown functionality of the file src/llama-sampler.cpp of the component Mirostat Sampler. The manipulation results in reachable assertion. It is possible to launch the attack remotely. The project was informed of the problem early through a pull request but has not reacted yet. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in WebRehab Super Forms super-forms allows Path Traversal.This issue affects Super Forms: from n/a through 6.3.316. |
| A weakness has been identified in a2aproject a2a-java up to 1.2.0.Final. This affects the function InMemoryPushNotificationConfigStore.setInfo of the file extras/push-notification-config-store-database-jpa/src/main/java/org/a2aproject/sdk/extras/pushnotificationconfigstore/database/jpa/JpaDatabasePushNotificationConfigStore.java of the component Push Notification Config Store. Executing a manipulation can lead to resource consumption. The attack can be launched remotely. Upgrading to version 1.3.0.Final mitigates this issue. This patch is called b478810a03b4a16841d36aca5c6e87d8f48fce67. You should upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: sparx5: clean up PSFP resources on flower setup failure
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() increments its pool reference count, but the
caller previously kept psfp_fmid as 0. If a later setup step failed, the
error path could try to delete flow-meter id 0 instead of the reused flow
meter, leaving the incremented reference behind. |
