| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
table->offset[i] is a u32 from firmware, but was stored into a signed
int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes
before the table buffer. The subsequent avail check was bypassed
because the negative int was promoted to a large size_t in the
expression "table_sz - offset - sizeof(*hdr)", yielding a large positive
avail and letting the out-of-bounds hdr->type read proceed undetected.
Store the offset as u32 and validate it with unsigned comparisons before
any pointer arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: refactor the two workqueues and init sequence
Multiple issues have been found within the hid-asus driver:
- unchecked size in asus_raw_event()
- unclean teardown of asus_probe on failure
- possible use-after-free in asus_probe
- multiple workqueue used for jobs where one was enough
- sleeping calls in atomic context
- packets of incorrect size being sent to the keyboard controller
Join the two workqueues into one reusing the stopping mechanism
of the brightness workqueue, use the joined workqueue to also
move the asus_wmi_send_event() sleeping call away from atomic
context and add a size check in asus_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix integer overflow in verify_tags() bounds check
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue
gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the
current backlog plus the packet length fits within the queue limit:
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ)
gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ)
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo)
sch->qstats.backlog + skb->len <= q->limit (plug)
sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len
are unsigned int, so all sums are computed in 32 bits and wrap at 2^32.
Once the true backlog exceeds 4 GiB the wrapped sum becomes small and
admission keeps succeeding, so the queue grows without bound and the kernel
can be driven to OOM.
Promote the sums to u64 so admission stops once the true backlog exceeds
the limit. The limit is u32, so the bounded queue stays below 2^32 and
the stored u32 backlog never wraps.
The bug can only be reproduced as root (albeit with ridiculous setup):
attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB,
leaving the default VQ unconfigured (for gred), and drive >4 GiB of
queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len,
or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32,
admission keeps succeeding, and the queue grows unboundedly to OOM. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to an integer overflow in MQINQ request processing. |
| VLC media player versions 3.0.0 through 3.0.23 contain a memory-safety vulnerability reachable when processing crafted media. Exploitation requires user interaction and may result in application termination or code execution with the privileges of the VLC process. |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. |
| virtio-win provides Windows paravirtualized drivers for QEMU and KVM. From mm210 until mm320, the Viosock driver permits a low-privilege local process to submit an IOCTL_SELECT request with attacker-controlled VIRTIO_VSOCK_SELECT.Fdss[*].fd_count values that overflow the 32-bit sum used by VIOSockSelect for bounds checking. The wrapped sum can pass the FD_SETSIZE check even though an individual descriptor count is much larger than the expected limit. VIOSockSelectCopyFds then iterates using the unchecked count and writes beyond the allocated pPkt->Fds array in the NonPagedPool kernel heap. Successful exploitation can corrupt kernel memory and enable privilege escalation in a Windows guest running the driver. This issue is fixed in mm320. |
| Integer Overflow or Wraparound in GitHub repository vim/vim prior to 9.0.1846. |
| Integer overflow or wraparound vulnerability in Samsung Opensource Escargot allows attackers with write access to the bytecode-cache directory to cause a heap-based buffer overflow and denial of service via a crafted cache file.
This issue affects Escargot: ac94df78493ee6fede286620d94f724e46b4d238. |
| Integer overflow in V8 in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation
Computing the effects of a TLB invalidation involves looking at
the size of the mapping cached by the TLB. For S1 mappings such as
VNCR, this is deducted from the combination of the base granule size
and the mapping level.
However, this implies that the S1 MMU is *on*. When the MMU is off,
we indicate this with the level being set to a "creative" value of
-127 (S1_MMU_DISABLED).
This ends-up being misinterpreted by pgshift_level_to_ttl() as it
doesn't handle negative levels at all (the level is immediately cast
to a u8 and only the bottom two bits considered), leading to an
invalidation size of 0. Not helpful.
Tidy-up pgshift_level_to_ttl() to handle these negative levels, and
ttl_to_size() to always return SZ_1G when no valid TTL is present.
This allows the removal of open-coded checks for similar situations.
Note that the check for a negative value not explicitely checking for
S1_MMU_DISABLED is deliberate, so that actual negative levels introduced
with LVA2 and D128 can take the same path if we ever support them. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and
ha->max_qpairs are u8. Deriving the queue count as
"ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board
(or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X
vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X
count of 1 zeroes it as well, and in target mode the subsequent
"ha->max_req_queues--" then underflows 0 to 255.
When the count is 0, qla2x00_alloc_queues() calls
kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is
not NULL, so the allocation check passes and the following
"ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory
or crashing the kernel.
Add qla_calc_queue_count() to clamp the derived value into
[1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and
use it at all three derivation sites (qla25xx_iospace_config(),
qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the
target-mode decrement so it cannot reintroduce a zero (which would in
turn underflow max_qpairs). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: fix firmware control interface bounds checks
panthor_init_cs_iface() and panthor_init_csg_iface() validate firmware
control interface offsets with 32-bit arithmetic and the size of the host
wrapper structures. The offsets are derived from firmware-provided strides,
so the arithmetic can wrap before the bounds check, and the host wrapper
size is not the size of the firmware control interface being mapped.
Use 64-bit arithmetic for the computed offsets and validate against the
actual firmware control interface structure sizes with subtraction-based
bounds checks. Also validate that the shared section is large enough for
the global control interface before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: harden firmware build-info bounds checks
panthor_fw_read_build_info() checks whether the metadata range fits in the
firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so
the addition can wrap and let an out-of-bounds range pass validation.
The function also reads the "git_sha: " prefix without first checking that
the metadata is long enough, and meta_size == 0 can underflow the NULL
terminator index.
Use subtraction-based bounds checking and reject metadata that is too short
to contain the expected prefix and trailing NULL byte. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap TLBI Range to the architural limit
TLB Invalidation by Range has a fairly powerful way of encoding pretty
large ranges in a small number of bits. This range can be based on an
arbitrary VA, which means it is pretty easy for a guest to generate an
overflow should the hypervisor be naive enough to add the range to the
base...
Make sure the range is capped to the limit dictated by the address bit
that determines the VA range. For an IPA invalidation, this is further
corrected down the line to ignore the upper range. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix length check __import_wp_info()
struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user
space. This is then assigned to wp_info->len, which is an int. The bounds
check is done on the truncated value while the allocation uses the
untruncated one:
wp_info->len = bp_data->len;
[...]
if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE)
return -EINVAL;
wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT);
Use the validated value for the allocation as intended. Without this
fix userspace can trigger >4GB allocations which will fail and result
in a WARN due to MAX_PAGE_ORDER. |
