| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1]. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: byd - synchronize timer deletion before freeing private data
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix multiple unsafe decodes in decode_locker()
decode_locker() in cls_lock_client.c contains three unsafe decode
operations that allow a malicious or compromised OSD to trigger
slab-out-of-bounds reads:
1. ceph_decode_copy() at the locker_id_t name field has no preceding
bounds check. With p == end after ceph_start_decoding() accepts
struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past
the validated buffer boundary.
2. *p += sizeof(struct ceph_timespec) after the locker_info_t header
is an unchecked pointer advance. A malicious OSD can position p
past end, causing all subsequent _safe checks to pass against a
bogus boundary.
3. len = ceph_decode_32(p) has no preceding bounds check, and the
immediately following *p += len is uncapped. A malicious OSD can
send len=0xffffffff, advancing p gigabytes past end and escaping
the decode window entirely.
Fix all three by replacing bare operations with their safe variants:
ceph_decode_copy -> ceph_decode_copy_safe
*p += sizeof(...) -> ceph_decode_skip_n
ceph_decode_32(p) -> ceph_decode_32_safe
*p += len -> ceph_decode_skip_n
A new label is added to return -EINVAL on any bounds violation.
-EINVAL is appropriate here: the data received from the OSD
is structurally malformed, which is an invalid argument to the decode
contract regardless of whether the caller or the wire is at fault.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition)
without any further privileges beyond OSD session establishment.
[ idryomov: use ceph_decode_skip_string() to skip description, trim
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as target osd for a (linger) request.
Because the osd_state, osd_weight, and osd_addr arrays only contain
max_osd entries (with indices 0 to max_osd -1), this leads to
out-of-bounds accesses when trying to read values from these arrays.
This patch fixes the issue by adding a check to get_temp_osds(), so that
only valid osd indices from primary_temp are used, and it falls back to
using the primary from pg_temp or the up set if it is invalid.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix OOB read in decode_watchers() via missing bounds check
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Limit the number of channel program segments
The processing of channel programs, and the CCWs within them, is done
recursively. As such, there is an arbitrary (but not architectural)
limit to the number of CCWs that can exist in a single channel program.
The vfio-ccw logic breaks these channel programs into segments whenever
it encounters a Transfer-In-Channel (TIC) CCW, and the combined number
of segments count towards the global limit. Impose an equivalent limit
to the number of segments until such logic can be made non-recursive. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Ensure index for read/write regions are within range
The introduction of the capability chain rightly clamped the
region indexes to the range of the capabilities itself, but
neglected to do so for the existing read/write regions which
should also be enforced. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Ensure first IDAW remains constant
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Fix out of bounds check on CCW array
The routine ccwchain_calc_length() counts the number of channel
command words (CCWs) that are chained together in a single channel
program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs.
The loop itself is "do..while (count < 257)", and while the logic in
is_cpa_within_range() correctly adjusts between the 0-index array of
CCWs and the count of CCWs starting at 1, this means it would look
at a possible 257th CCW before ending the loop and (correctly)
returning an error.
Fix this by restructuring the loop to break as soon as 256 CCWs
(thus indexes 0-255) are examined, without looking at memory
outside the range. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Move cp cleanup out of not operational
The fsm_notoper() routine is called when the device has been
lost, and is (by definition) no longer operational. Since this
can happen asynchronously from the normal behavior of the
driver, the cleanup may happen when holding other locks
in the calling sequence (notably, the cio subchannel lock).
Push the cleanup of the private->cp resources to a workqueue,
where it can be done out from under that lock sequence and
a future patch can safely manage the locking requirements. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Selectively expand io_mutex
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Implement a crw lock
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing
The zcrypt_msgtype6_send_ep11_cprb() function uses fragile struct
overlays to access and modify the domain field in the EP11 CPRB
payload, creating maintainability and security concerns:
1. Struct overlay approach (pld_hdr) assumes fixed payload structure
and doesn't validate the actual ASN.1 encoding.
2. Complex length format detection logic is error-prone and doesn't
properly validate bounds at each parsing step.
3. Direct struct member access bypasses proper ASN.1 validation.
Fix by replacing struct overlays with explicit ASN.1 parsing that
validates each field (payload tag/length, function tag/length/value,
optional domain tag/length/value) with proper bounds checking at every
step. Add asn1_int_encode() helper function to safely write integer
values with correct endianness conversion. This makes the code
consistent with the validation pattern introduced with the rework of
the xcrb_msg_to_type6_ep11cprb_msgx() function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate GEM_CREATE domain combinations
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
(cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD decode image min size calculation
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
(cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: bounds-check buffer log item's dirty bitmap
xlog_recover_do_reg_buffer() replays each dirty region described by a
buffer log item's bitmap into the buffer read for that item:
memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLF_SHIFT),
item->ri_buf[i].iov_base,
nbits << XFS_BLF_SHIFT);
The destination offset (bit/nbits, from the logged dirty bitmap) and the
buffer size (from the logged blf_len) are both attacker-controlled and
otherwise unrelated, yet the only thing bounding the copy is an ASSERT(),
which compiles away on production kernels. A crafted image logging a
small blf_len together with a bitmap bit past the end of that buffer
drives the memcpy() past the buffer's allocation, corrupting adjacent
kernel heap during mount-time log recovery. This is reachable by anyone
who can get a crafted image mounted -- the malicious-filesystem threat
model XFS already guards against elsewhere.
Turn the ASSERT() into a real XFS_IS_CORRUPT() check that aborts recovery
of the buffer with -EFSCORRUPTED, consistent with the validate-and-fail
idiom already used in xlog_recover_do_inode_buffer() and
xfs_dquot_item_recover.c. xlog_recover_do_reg_buffer() therefore becomes
STATIC int and its three callers propagate the error.
Found and confirmed with KASAN on a CONFIG_XFS_DEBUG=n build: the crafted
image trips a slab-out-of-bounds write before this change and fails
recovery cleanly with -EFSCORRUPTED after it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN
When exchanging two full-file ranges, xmi_can_exchange_reflink_flags()
can move the reflink inode flag from the file that currently has it to
the other file, as long as exactly one side is marked. This assumes
that the file contents, and therefore all shared extents, are exchanged.
That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set.
xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings
from file1, so an exchange can complete without moving every mapping
that the earlier flag-swap decision accounted for. In that case the
post-operation cleanup can clear the reflink flag from an inode that
still owns shared written extents. Later writes then take the
non-reflink write path and may update blocks that should still have
been protected by CoW, which shows up as data corruption between
reflink-related files.
Fix this by disabling the reflink flag exchange whenever
XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still
proceed; the conservative outcome is that both inodes keep the reflink
flag. The regular reflink flag cleanup path can drop the extra flag
later once the inode no longer has shared extents. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: avoid fs reclaim while using current->journal_info
handle_reply() stores a `ceph_mds_request` pointer in
`current->journal_info` while filling the inode and dentry cache from
an MDS reply.
An allocation in this section can enter direct reclaim and prune
dentries from another filesystem. If this dirties an ext4 inode, ext4
starts a JBD2 transaction. JBD2 interprets the Ceph request in
`current->journal_info` as a journal handle and dereferences the
request's `r_tid` as `h_transaction`, causing a kernel crash, e.g.:
Unable to handle kernel paging request at virtual address 00000000077b4818
[...]
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 6 UID: 0 PID: 2699135 Comm: kworker/6:3 Tainted: G W 6.18.38-i3 #1113 NONE
[...]
Workqueue: ceph-msgr ceph_con_workfn
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : jbd2__journal_start+0x2c/0x208
lr : __ext4_journal_start_sb+0x100/0x178
[...]
Call trace:
jbd2__journal_start+0x2c/0x208 (P)
__ext4_journal_start_sb+0x100/0x178
ext4_dirty_inode+0x3c/0x90
__mark_inode_dirty+0x58/0x400
iput.part.0+0x2b0/0x370
iput+0x18/0x30
dentry_unlink_inode+0xc0/0x158
__dentry_kill+0x80/0x250
shrink_dentry_list+0x90/0x130
prune_dcache_sb+0x60/0x98
super_cache_scan+0xe8/0x190
do_shrink_slab+0x174/0x388
shrink_slab+0xd8/0x4c0
shrink_node+0x31c/0x908
do_try_to_free_pages+0xd0/0x508
try_to_free_pages+0x11c/0x238
__alloc_frozen_pages_noprof+0x4d0/0xdd0
__folio_alloc_noprof+0x18/0x70
__filemap_get_folio+0x248/0x440
ceph_readdir_prepopulate+0x570/0x9e8
mds_dispatch+0x1424/0x1ba0
ceph_con_process_message+0x74/0xa0
ceph_con_v1_try_read+0x3a0/0x1510
ceph_con_workfn+0x260/0x460
Enter a scoped NOFS allocation context and leave it after clearing
`journal_info`. This prevents filesystem reclaim from recursing into
another filesystem while the field contains Ceph-private data. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix hanging __ceph_get_caps() with stale mds_wanted
A reader can hang forever in __ceph_get_caps() when the client no
longer holds `FILE_RD`, but local cap state still says that the
capability is already wanted (via `mds_wanted`).
One way to trigger this is through MDS cap revocation. If another
client performs a conflicting operation, the MDS can revoke `FILE_RD`
from the reader; the next read then has to reacquire `FILE_RD`. If
the cap update that should request `FILE_RD` never reaches the MDS
after `cap->mds_wanted` was raised, the reader is left holding only
non-file caps while local `mds_wanted` still includes the file read
caps.
In that state, try_get_cap_refs() sees `need <= mds_wanted` and
returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap
update that was supposed to request `FILE_RD never reaches the MDS
after `cap->mds_wanted was` raised, no further request is sent and the
waiter can sleep indefinitely until unrelated cap traffic happens to
wake it up.
The ordering issue is that `cap->mds_wanted` is updated in
__prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually
queued for send. That makes one field serve two different meanings at
once: what this client wants, and what the client believes the MDS
already knows it wants.
A proper fix would be to split those states and track whether a cap
update is actually in flight or has been observed by the MDS.
However, simply moving the `cap->mds_wanted assignment` later would
not be sufficient: queueing the message in the messenger does not
guarantee that the MDS processed that specific wanted set, and
reconnect or message loss can still invalidate that assumption.
Fixing that properly would require a larger rework of the cap state
machine.
To allow simpler backports to stable kernels, this patch implements a
simpler workaround:
- stop waiting forever in __ceph_get_caps(); after a bounded wait,
fall back to the renew path
- make ceph_renew_caps() issue a synchronous `OPEN` request whenever
the inode still does not actually hold the wanted caps, instead of
only calling ceph_check_caps()
The extra issued-vs-wanted check in ceph_renew_caps() is necessary
because the previous test only checked whether the inode still had any
real caps at all. That is not enough after revocation: the client can
still hold something like `pLs` and yet be missing `FILE_RD`
completely. In that case, falling back to ceph_check_caps() is not
sufficient, because it still trusts `cap->mds_wanted` and may resend
nothing. By requiring `(issued & wanted) == wanted` before taking the
asynchronous path, the code only uses ceph_check_caps() when the
`wanted caps` are already actually issued. Otherwise, it sends the
synchronous `OPEN` renew.
This preserves the existing asynchronous fast path when the wanted
caps are already issued, avoids changing cap-state semantics, and
fixes the hang by guaranteeing that a stalled waiter eventually
retries through a path that does not rely on the stale `mds_wanted`
state.
[ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to
mds_client.h, formatting ] |
