| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, xdp: move offload check into dev_xdp_install()
bpf_xdp_link_update() calls dev_xdp_install() directly and skips
dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can
make an XDP link with a normal program and then swap in an offloaded or
device-bound program with BPF_LINK_UPDATE, which puts it on the software
path.
dev_xdp_install() is the one place all three paths go through:
"ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and
BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded,
bound to another device, device-bound in generic mode, native vs generic,
DEVMAP and CPUMAP) there, and keep only the netlink-flag check
(XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach(). |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix NULL deref in dpll_device_ops() during teardown race
When the last owner of a dpll device unregisters while a foreign driver
still holds a pin on it via dpll_pin_on_pin_register(), the dpll object
stays alive with an empty registration list. A pin notification queued
before the unregister (e.g. ice reacting to zl3073x_i2c removal) then
walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and
dereferences the missing registration. dpll_lock cannot help because the
notification work was queued before the unregistering driver took the
lock.
Treat the empty registration list as a legitimate transient state. Make
dpll_priv() and dpll_device_ops() return NULL in that case and make
every pin netlink path that resolves a device from a pin skip such
dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and
returns -ENODEV when there is none, the pin dumpit skips such a pin
instead of aborting the dump, dpll_msg_add_pin_dplls() and the
frequency, esync, reference sync and phase adjust set paths skip dead
refs, and dpll_pin_parent_device_set() validates the parent with
dpll_device_get_by_id(). dpll_pin_register() is the last caller that
dereferenced the device ops without a check, so move its frequency
monitor validation under dpll_lock and tolerate a missing registration
there as well.
The empty registration list is equivalent to a cleared DPLL_REGISTERED
mark, both transitions happen under dpll_lock in dpll_device_register()
and dpll_device_unregister(). A pin notification for a pin whose dplls
are all gone is now dropped with -ENODEV instead of crashing, all
callers in the core ignore that return value.
WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40,
CPU#83: kworker/u576:3/23471
Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ...
Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice]
RIP: 0010:dpll_device_ops+0x24/0x40
Call Trace:
<TASK>
dpll_cmd_pin_get_one+0x336/0x520
dpll_pin_event_send+0x82/0x140
dpll_pin_on_pin_unregister+0xbb/0x160
ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice]
process_one_work+0x19e/0x370
worker_thread+0x1a6/0x310
kthread+0xe4/0x120
ret_from_fork+0x1a1/0x270
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix resize of the RX ring
When a AF_XDP socket is attached, the virtnet_rx_resize
should resize the rq->xsk_buffs XSK buffer array. Otherwise,
when the size grows, the virtnet_rx_resume() causes a write
past the end of the array. This is easily reproducable with
ethtool -G ens3 rx 32
./xdpsock -i eth0 -q 0 -r -z &
ethtool -G eth0 rx 256 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: don't check the listener's sk_err in vsock_accept()
Syzbot reported an issue which can be reproduced with these steps:
r0 = socket(AF_VSOCK, SOCK_STREAM, 0)
bind(r0, {VMADDR_CID_ANY, PORT})
connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect)
listen(r0, backlog) -> 0
r1 = socket(AF_VSOCK, SOCK_STREAM, 0)
connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0
accept(r0) -> -1, EPROTO (stale sk_err)
Basically, it creates a socket (r0) and triggers a self-connect after
binding it. This self-connect fails with EPROTO because it loops back
to r0 while the socket is still in the TCP_SYN_SENT state, causing it
to be incorrectly dispatched to the connecting-client path. The
unexpected packet type encountered there sets sk_err to EPROTO.
After that, it invokes a listen() call on the same socket. This
listen() call succeeds because the kernel's listening path never
inspects or clears sk_err. Then, a new socket (r1) is created as a
normal client and connects to r0. However, vsock_accept() rejects this
incoming connection because the listener's sk_err still holds the
EPROTO error from the earlier failed self-connect.
This rejection causes the child socket created for r1's connection to
never be freed on virtio or hyperv transports; only the VMCI transport
implements pending_work to revisit and clean up a rejected socket.
For a non-blocking connect(), vsock_connect() may return -EINPROGRESS
immediately, and vsock_connect_timeout() can later set sk->sk_err
asynchronously.
Since no vsock transport ever sets sk_err on a socket while it is in
TCP_LISTEN state, checking it in vsock_accept() serves no purpose and
only carries forward errors left behind by earlier, unrelated
connection attempts on the same socket. Remove the checks so accept()
no longer rejects valid incoming connections because of a stale
error, which also avoids the resource leak described above. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/*
causes use-afer-free crash when either alloc_percpu() or dev_addr_init()
in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device
refcount tracker infrastructure") added ref_tracker_dir_exit() to only
free_netdev() path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mtpav: shut down output timer before card teardown
snd_mtpav_output_timer() rearms chip->timer while holding
chip->spinlock and accesses the card-private mtpav state.
snd_mtpav_free() currently takes the same lock and calls
timer_delete() when the timer is active. This only removes a
pending timer; it does not wait for a callback that is already
running and does not prevent the callback from rearming the timer.
A callback running on another CPU can therefore continue after
snd_mtpav_free() releases the lock and access the card-private
state while the card is being torn down. It can also rearm the
timer after timer_delete() has returned.
Call timer_shutdown_sync() without holding chip->spinlock. This
waits for any running callback to finish and prevents further
rearming before the card-private mtpav state is released. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qlcnic: validate unified ROM sections before loading
The unified ROM parser reads directory, product, and data-descriptor fields
from the firmware file. Existing validation forms table and data ends with
unchecked additions and multiplications. Malformed values can wrap before
they are compared with the firmware size. The parser also dereferences
typed pointers at firmware-controlled offsets.
Valid descriptor extents alone are insufficient for the consumers. The
loader reads a fixed-size bootloader regardless of its declared size, the
version parser assumes a 17-byte tail, and a partial final firmware word is
read as a full u64. A truncated image can therefore make the driver read
beyond the firmware allocation during validation or loading.
Replace the pointer-returning parser with bounded range helpers. Validate
table entry sizes, descriptor indices, section ranges, the fixed
bootloader load length, and the version tail before exposing any section.
Read all file fields with unaligned little-endian accessors and assemble a
partial final word from only the bytes that remain. Apply the same range
checks to the legacy image before reading its fixed fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6mr: do not clone dst in ip6mr_cache_report()
IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU.
When an ingress multicast packet misses MFC lookup,
ip6mr_cache_unresolved() places the skb onto the unresolved queue,
escaping the receive-side RCU grace period.
If the underlying route is deleted and freed, and the MFC queue is later
resolved with a wrong parent interface, ip6_mr_forward() invokes
ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes
dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab
use-after-free.
Report packets queued to mroute6_sk (a raw socket) and netlink
notifications do not require an attached dst entry.
Fix this by:
1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs
do not hold a dst.
2. Dropping skb_dst before queuing unresolved skbs in
ip6mr_cache_unresolved(), matching the fact that multicast
forwarding resolves outgoing routes anew via ip6_route_output(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue
gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the
current backlog plus the packet length fits within the queue limit:
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ)
gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ)
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo)
sch->qstats.backlog + skb->len <= q->limit (plug)
sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len
are unsigned int, so all sums are computed in 32 bits and wrap at 2^32.
Once the true backlog exceeds 4 GiB the wrapped sum becomes small and
admission keeps succeeding, so the queue grows without bound and the kernel
can be driven to OOM.
Promote the sums to u64 so admission stops once the true backlog exceeds
the limit. The limit is u32, so the bounded queue stays below 2^32 and
the stored u32 backlog never wraps.
The bug can only be reproduced as root (albeit with ridiculous setup):
attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB,
leaving the default VQ unconfigured (for gred), and drive >4 GiB of
queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len,
or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32,
admission keeps succeeding, and the queue grows unboundedly to OOM. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: fix reading neigh ha
Currently arp/neigh_reduce read neigh ha directly which can lead to
partial reads while the neigh is being updated. Use neigh_ha_snapshot to
take a stable snapshot of the address similar to route_shortcircuit which
already does the right thing. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: zero referring call lists before decoding
decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so
each referring_call_list starts uninitialized. decode_rc_list() assigns
rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero
referring calls therefore leaves the pointer uninitialized, and
nfs4_callback_sequence() later passes stale slab contents to kfree().
Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is
NULL from the beginning, including valid empty referring call lists. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: account classifier filter allocations to memcg
Allocations in the tc classifier *_change() paths (filter objects,
per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without
__GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside
memcg charging. The shared tcf_exts_init_ex() action array allocation in
cls_api.c was also uncharged; this patch closes it along with the
per-classifier filter-object/percpu/aux allocations that remain
unaccounted.
Add GFP_KERNEL_ACCOUNT to:
- the shared tcf_exts_init_ex() action array (cls_api.c), common to every
filter of every classifier (32 pointers, 256 bytes);
- the filter-object, per-CPU-counter, and per-filter aux allocations in
cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw,
cls_matchall, cls_route and cls_u32;
- the u32_init_knode() replace-path knode allocation (cls_u32.c), which
allocates the same struct tc_u_knode + sel.keys on every replace of an
existing knode and was missed by the create-path-only conversion.
Also fix the cls_basic error path: basic_change() inserts fnew into the
IDR before allocating the per-CPU counter. If alloc_percpu() fails the
errout path kfree'd fnew without idr_remove, leaving a dangling pointer
in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable
on demand (memcg at memory.max), making the dead path attacker-reachable
and burning the handle permanently. Add the idr_remove on the percpu
failure path, matching the basic_set_parms failure-path pattern.
Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to
extend to the other classifiers.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used),
CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS.
- Unprivileged user in a fresh user+network namespace (unshare -Urn),
or root with CAP_NET_ADMIN.
- Create a large number of tc filters (e.g. tc filter add dev lo
ingress ... <classifier> ...) while watching a memcg-limited cgroup:
system slab grows far faster than memory.current, pinning kernel
memory outside memcg charging. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition
The VMBus module initialization function, hv_acpi_init(), currently
does nothing when running in the root partition and root is not nested
in another VM. But the initialization function reports success, so the
VMBus module is indeed loaded. VMBus functionality is not actually
needed, but the VMBus module must be loaded so that hv_vmbus_exists()
can answer correctly. Furthermore, the mshv_root dependency on the
VMBus module is needed as described in the commit message for
840b740a35bf ("mshv: Add conditional VMBus dependency").
Loading the VMBus module without actually initializing it causes
failures if the module should later be unloaded. The module unload code
tries to clean up things that were never initialized, resulting in
memory faults and a panic.
Fix this by having VMBus module exit function perform the same
check for non-nested root partition, and do nothing in such a
case, just like hv_acpi_init().
In the long run, the code that manages the Hyper-V provided SynIC
should be refactored to better coordinate the requirements of
root partition scenarios and normal VM scenarios, and to hopefully
remove the hv_vmbus_exists() dependnecy between mshv_root and
VMBus modules. Preventing the current unload failure scenario is
an expediency until such a refactoring is done. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: access chan->conn safely in get/setsockopt
Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref")
l2cap_chan::conn has held reference and remains non-NULL also after the
corresponding hci_conn is deleted. In this state accessing various
fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in
l2cap_sock_setsockopt() access of conn->hcon->hdev.
Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before
trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in
getsockopt/setsockopt to ensure it stays alive, and to avoid data races
in l2cap_chan fields. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: do not leak an hci_conn when a second LE connect is rejected
create_le_conn_complete() decides whether the failed connection is
still pending by comparing it against hci_lookup_le_connect(), which
returns the first LE connection in BT_CONNECT. That is the same
connection only while at most one is pending.
Two can be pending. Connections created on the passive scan path sit
in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to
hci_lookup_le_connect() until hci_le_create_conn_sync() clears the
flag when their command is issued, so the -EBUSY guard in
hci_connect_le() does not prevent a second connection from being
queued while the first is still on the scan path. Whenever two
connections are in BT_CONNECT at once, the lookup may return one
connection while create_le_conn_complete() is reporting the failure
of the other; the early exit then drops the error and hci_conn_failed()
never runs on the connection that failed.
The controller also rejects a second HCI_OP_LE_CREATE_CONN issued
while another connection creation is still outstanding, per Core Spec
Vol 4, Part E. The spec calls for Command Disallowed there; the
bcm43438 observed here answers with an LMP/LL error code instead,
which bt_to_errno() maps to the -EPROTO (-71) in the log below.
The leaked connection stays in BT_CONNECT forever, and because
hci_connect_le() refuses to dial while hci_lookup_le_connect() finds
anything, every subsequent attempt to reach any peer fails with
-EBUSY and no command reaches the controller at all.
Seen on a bcm43438 with two BLE peers polled on the same interval
(state 5 is BT_CONNECT; both handles are UNSET ones, allocated from
the ida above HCI_CONN_HANDLE_MAX):
Bluetooth: hci1: Opcode 0x2013 failed: -71
# hcitool con
< LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL
< LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL
A btmon capture across the next ten minutes of connect attempts
contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections
do not recover until the adapter is reset. With this change the same
scenario fails the rejected connection cleanly and further connects
to both peers go through.
Ask about the connection itself instead of about the device. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: honor XDP_TX_METADATA in zero-copy path
The zero-copy path reads TX metadata whenever the UMEM has metadata space,
even if the descriptor does not set XDP_TX_METADATA. Pass descriptor
options through the metadata helpers and ignore metadata unless the option
is set.
This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs.
Only the descriptor that starts a session passes through
xsk_tx_metadata_request() and configures offload state shared by the batch.
Metadata on descriptors joining an open session is therefore not validated
and does not configure its requested offloads. In addition, a non-NULL
metadata pointer from such a descriptor is treated as a timestamp
completion request even when XDP_TXMD_FLAGS_TIMESTAMP is not set, so its
metadata union can be overwritten with an unrequested timestamp. Fixing
mixed metadata states within one MPWQE requires a separate change. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Only operate on Ethernet frames
act_ife encapsulates/decapsulates the original Ethernet header and uses
skb->dev->hard_header_len as the length of that header. That is only
correct for Ethernet devices: on a device where hard_header_len does not
match the L2 header that was actually pulled (PPP reports PPP_HDRLEN
while nothing is stripped on ingress), the ingress skb_push()/skb_pull()
use the wrong length and can hit skb_under_panic when headroom is tight.
IFE is Ethernet-only by design - it builds an outer ethhdr, rewrites
h_source/h_dest/h_proto, and calls eth_type_trans() on decode - so
instead of trying to make the offsets work for arbitrary link types,
simply drop packets that do not carry an Ethernet header.
Checking skb->dev->type alone is not enough. We have to cater for a
corner case where mirred can redirect an skb from a non-Ethernet device
to an Ethernet one, and skb->dev then says nothing about the framing the
skb actually has: an skb redirected from ppp0 reaches the target's ingress
hook with mac_len 0 and no Ethernet header at all. So at ingress also
require mac_len to be ETH_HLEN. On egress mac_len is not maintained, so
the device type is all we have; a bogus redirect there yields a malformed
frame rather than an out-of-bounds push, and it would be malformed with or
without IFE.
That corner case is not theoretical - redirecting from ppp0 into a veth
that has an ife encode action on its ingress hook panics without this
patch:
skbuff: skb_under_panic: len:98 put:14 head:ffff88800e410000
data:ffff88800e40fff5 tail:0x57 end:0x640 dev:veth3
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:224 net/core/skbuff.c:2657)
tcf_ife_act (net/sched/act_ife.c:829 net/sched/act_ife.c:874)
tc_run (net/core/dev.c:4463)
netif_receive_skb (net/core/dev.c:6463 net/core/dev.c:6522)
tcf_mirred_to_dev (net/sched/act_mirred.c:248 net/sched/act_mirred.c:328)
tcf_mirred_act (net/sched/act_mirred.c:489)
tc_run (net/core/dev.c:4463)
process_backlog (net/core/dev.c:6728)
With Ethernet framing guaranteed, use ETH_HLEN instead of
hard_header_len. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq: add overflow bounds to quantum and initial quantum
fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 *
psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy
with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return
0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit
arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill
loop adds 0 to f->credit (which stays <= 0) and goto begin loops
forever under the qdisc lock, creating a soft lockup.
Clamp psched_mtu() to [1, 1 << 20] before multiplying so the product
cannot wrap, then cap the result at 1 << 20, matching the bound already
enforced on TCA_FQ_QUANTUM in fq_change().
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) is large enough that 2 * psched_mtu() wraps (e.g. a
dummy device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
