| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The docker_pull module uses the realm parameter from a Docker registry's WWW-Authenticate response header as the authentication endpoint without validation. An attacker in a man-in-the-middle position between bbot and a Docker registry could modify this header to redirect the authentication request to an arbitrary endpoint, potentially leaking authentication tokens. |
| The CF7 to Webhook plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 5.0.0 via the pull_the_trigger. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. Exploitation requires that the admin-configured webhook URL contains a Contact Form 7 field placeholder in the host segment of the URL, and that the affected form is publicly accessible. |
| GeoServer is an open source server that allows users to share and edit geospatial data. Prior to versions 2.26.4 and 2.27.3, a GeoServer that uses `ENTITY_RESOLUTION_ALLOWLIST` may allow attacker to perform unauthenticated Server-Side Request Forgery (SSRF). This vulnerability requires that GeoServer is set up to use a proxy base URL and the `ENTITY_RESOLUTION_ALLOWLIST` (default since 2.25.0). Versions 2.26.4 and 2.27.3 contain a fix. GeoServer installations are only affected by this vulnerability if they use a proxy base URL that does not contain a URL path or end with a slash. If the proxy base URL does not contain a path, adding a slash to the end of the URL will mitigate this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix missing last_unlink_trans update when removing a directory
When removing a directory we are not updating its last_unlink_trans field,
which can result in incorrect fsync behaviour in case some one fsyncs the
directory after it was removed because it's holding a file descriptor on
it.
Example scenario:
mkdir /mnt/dir1
mkdir /mnt/dir1/dir2
mkdir /mnt/dir3
sync -f /mnt
# Do some change to the directory and fsync it.
chmod 700 /mnt/dir1
xfs_io -c fsync /mnt/dir1
# Move dir2 out of dir1 so that dir1 becomes empty.
mv /mnt/dir1/dir2 /mnt/dir3/
open fd on /mnt/dir1
call rmdir(2) on path "/mnt/dir1"
fsync fd
<trigger power failure>
When attempting to mount the filesystem, the log replay will fail with
an -EIO error and dmesg/syslog has the following:
[445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650
[445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm
[445771.627912] BTRFS info (device dm-0): start tree-log replay
[445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5
[445771.629453] memcg:ffff89f400351b00
[445771.629892] aops:btree_aops [btrfs] ino:1
[445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8
[445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00
[445771.635029] page dumped because: eb page dump
[445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir
[445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5
[445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087
[445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[445771.638097] inode generation 3 transid 9 size 16 nbytes 16384
[445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0
[445771.638100] rdev 0 sequence 2 flags 0x0
[445771.638102] atime 1775744884.0
[445771.660056] ctime 1775744885.645502983
[445771.660058] mtime 1775744885.645502983
[445771.660060] otime 1775744884.0
[445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[445771.660064] index 0 name_len 2
[445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34
[445771.660068] location key (259 1 0) type 2
[445771.660070] transid 9 data_len 0 name_len 4
[445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34
[445771.660076] location key (257 1 0) type 2
[445771.660077] transid 9 data_len 0 name_len 4
[445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[445771.660079] location key (257 1 0) type 2
[445771.660080] transid 9 data_len 0 name_len 4
[445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34
[445771.660082] location key (259 1 0) type 2
[445771.660083] transid 9 data_len 0 name_len 4
[445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160
[445771.660086] inode generation 9 transid 9 size 8 nbytes 0
[445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0
[445771.660088] rdev 0 sequence 2 flags 0x0
[445771.660089] atime 1775744885.641174097
[445771.660090] ctime 1775744885.645502983
[445771.660091] mtime 1775744885.645502983
[445771.660105] otime 1775744885.641174097
[445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14
[445771.660107] index 2 name_len 4
[445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34
[445771.660109] location key (2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a resource leak in xfs_alloc_buftarg()
In the error path, call fs_put_dax() to drop the DAX
device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| Object lifecycle issue in Metrics in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| TypeBot is a chatbot builder tool. In versions prior to 3.17.2, SSRF validation is implemented by resolving a hostname once and checking whether the resolved IP belongs to a forbidden range allowing for DNS rebinding bypass. The root cause is a time-of-check to time-of-use gap in the SSRF guard. The validator resolves the hostname and approves it, but the later request path performs a fresh resolution and connects to whatever IP the hostname maps to at that moment. The actual outbound request is then performed later using the original hostname, without pinning the validated IP to the network connection. An attacker who can supply a URL to a public bot that performs a server-side HTTP Request block or server-side script fetch can use DNS rebinding to pass the initial validation and still force the server to connect to a private or metadata address during the real request. This enables server-side access to private network services, cloud metadata endpoints, and other internal HTTP targets that the validator was intended to block. The exact downstream impact depends on the reachable internal services. Concrete consequences include metadata disclosure, access to internal admin panels, credential theft from metadata services, and further compromise through internal-only HTTP interfaces. This issue has been fixed in version 3.17.2. |
| An authenticated Server-Side Request Forgery (SSRF) in the custom scraper subsystem component of Benjamin Jonard Koillection v1.8.0 allows attackers to scan internal resources via supplying a crafted URL. |
| Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. In versions 1.56.0 through 1.101.0, 2.0.0b1, and 2.0.0b2, the cloud-metadata blocklist could be bypassed by encoding the metadata IP in an IPv6 transition form that the previous fix, CVE-2026-46678, did not decode, exposing cloud IAM short-term credentials. The previous remediation decoded only IPv4-mapped IPv6, 6to4, and the NAT64 well-known prefix, so the metadata guarantee did not hold for the remaining transition forms: IPv4-compatible IPv6 (::a.b.c.d), the NAT64 RFC 8215 local-use prefix (64:ff9b:1::/48), operator-chosen NAT64 prefixes, and ISATAP. The IPv6 wrapper is then delivered to the underlying IPv4 metadata endpoint. This occurs when an application using Pydantic AI opts a URL into force_download='allow-local' (which disables the default block on private/internal IPs) and runs on a network that actually routes the affected IPv6 transition forms: NAT64-configured networks (IPv6-only or dual-stack-with-NAT64 deployments, including some Kubernetes setups) for the NAT64 variants, or networks with an ISATAP tunnel for ISATAP. A standard dual-stack cloud VM or container does not route these forms and is not affected in practice. The IPv4-compatible and Teredo variants are deprecated and addressed as defense-in-depth. This is an incomplete fix of GHSA-cqp8-fcvh-x7r3 / CVE-2026-46678 (itself a follow-up to CVE-2026-25580). This issue has been fixed in version 2.0.0b3. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: return error when node already exists in hfs_bnode_create
When hfs_bnode_create() finds that a node is already hashed (which should
not happen in normal operation), it currently returns the existing node
without incrementing its reference count. This causes a reference count
inconsistency that leads to a kernel panic when the node is later freed
in hfs_bnode_put():
kernel BUG at fs/hfsplus/bnode.c:676!
BUG_ON(!atomic_read(&node->refcnt))
This scenario can occur when hfs_bmap_alloc() attempts to allocate a node
that is already in use (e.g., when node 0's bitmap bit is incorrectly
unset), or due to filesystem corruption.
Returning an existing node from a create path is not normal operation.
Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's
already hashed. This properly signals the error condition to callers,
which already check for IS_ERR() return values. |
| LangGraph SQLite Checkpoint is an implementation of LangGraph CheckpointSaver that uses SQLite DB (both sync and async, via aiosqlite). In versions 4.1.0 and prior, the JsonPlusSerializer can reconstruct Python objects from JSON checkpoint payloads. Under conditions where someone could modify checkpoint bytes at rest in the backing store, the deserialization path could reconstruct objects beyond what the application expects, which could in turn result in code execution at checkpoint load time. This is a defense-in-depth issue. The affected behavior is reachable only when checkpoint bytes at rest in the backing store can be modified by an unauthorized party. In most deployments that prerequisite already implies a serious incident; the additional concern is turning "checkpoint-store write access" into code execution in the application runtime. This issue has been fixed in version 4.1.1. |
| OpenClaw before 2026.5.26 contains a hostname validation vulnerability allowing attackers to bypass blocklist comparisons using trailing-dot notation in model or workspace-derived URLs. Attackers can exploit inconsistent hostname checks to reach destinations that operators intended to block through hostname policies. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device_node leak in mc_probe()
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope. |
| Sync-in Server is a secure, open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.3.0, the private IP blocklist regex used in the URL download feature does not match IPv4-mapped IPv6 addresses (e.g. ::ffff:127.0.0.1), allowing SSRF protection to be bypassed on dual-stack systems. Version 2.3.0 fixes the issue. |
| IBM Langflow Desktop 1.0.0 through 1.9.2 IBM Langflow is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix usb_dev refcount leak on probe failure
create_card() takes a reference on the USB device with usb_get_dev()
and stores the matching usb_put_dev() in card_free(), which is
installed as the snd_card's ->private_free destructor.
However, ->private_free is only assigned near the end of init_card(),
after several failure points (usb_set_interface(), EP type checks,
usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its
timeout). When any of those fail, init_card() returns an error to
snd_probe(), which calls snd_card_free(card). Because ->private_free
is still NULL, card_free() never runs, the usb_get_dev() reference
is not dropped, and the struct usb_device leaks along with its
descriptor allocations and device_private.
syzbot reproduces this with a malformed UAC3 device whose only valid
altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call
fails with -EIO and triggers the leak.
Move the ->private_free assignment into create_card(), immediately
after usb_get_dev(), so that every error path reaching snd_card_free()
balances the reference. card_free()'s callees (snd_usb_caiaq_input_free,
free_urbs, kfree) already tolerate the partially-initialized state
because the chip private area is zero-initialized by snd_card_new(). |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in testdrv_probe()
The function testdrv_probe() retrieves the device_node from the PCI
device, applies an overlay, and then immediately calls of_node_put(dn).
This releases the reference held by the PCI core, potentially freeing
the node if the reference count drops to zero. Later, the same freed
pointer 'dn' is passed to of_platform_default_populate(), leading to a
use-after-free.
The reference to pdev->dev.of_node is owned by the device model and
should not be released by the driver. Remove the erroneous of_node_put()
to prevent premature freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
