Search Results (166 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2023-52516 1 Linux 1 Linux Kernel 2026-01-05 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated---
CVE-2022-49765 1 Linux 1 Linux Kernel 2025-12-23 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p: use a dedicated spinlock for trans_fd Shamelessly copying the explanation from Tetsuo Handa's suggested patch[1] (slightly reworded): syzbot is reporting inconsistent lock state in p9_req_put()[2], for p9_tag_remove() from p9_req_put() from IRQ context is using spin_lock_irqsave() on "struct p9_client"->lock but trans_fd (not from IRQ context) is using spin_lock(). Since the locks actually protect different things in client.c and in trans_fd.c, just replace trans_fd.c's lock by a new one specific to the transport (client.c's protect the idr for fid/tag allocations, while trans_fd.c's protects its own req list and request status field that acts as the transport's state machine)
CVE-2024-38634 1 Linux 1 Linux Kernel 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Lock port->lock when calling uart_handle_cts_change() uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100] RIP: 0010:uart_handle_cts_change+0xa6/0xb0 ... max3100_handlerx+0xc5/0x110 [max3100] max3100_work+0x12a/0x340 [max3100]
CVE-2024-43849 1 Linux 1 Linux Kernel 2025-11-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pdr: protect locator_addr with the main mutex If the service locator server is restarted fast enough, the PDR can rewrite locator_addr fields concurrently. Protect them by placing modification of those fields under the main pdr->lock.
CVE-2024-57939 1 Linux 1 Linux Kernel 2025-11-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: riscv: Fix sleeping in invalid context in die() die() can be called in exception handler, and therefore cannot sleep. However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled. That causes the following warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex preempt_count: 110001, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234 Hardware name: riscv-virtio,qemu (DT) Call Trace: dump_backtrace+0x1c/0x24 show_stack+0x2c/0x38 dump_stack_lvl+0x5a/0x72 dump_stack+0x14/0x1c __might_resched+0x130/0x13a rt_spin_lock+0x2a/0x5c die+0x24/0x112 do_trap_insn_illegal+0xa0/0xea _new_vmalloc_restore_context_a0+0xcc/0xd8 Oops - illegal instruction [#1] Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT enabled.
CVE-2024-40922 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-10-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: don't lock while !TASK_RUNNING There is a report of io_rsrc_ref_quiesce() locking a mutex while not TASK_RUNNING, which is due to forgetting restoring the state back after io_run_task_work_sig() and attempts to break out of the waiting loop. do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff815d2494>] prepare_to_wait+0xa4/0x380 kernel/sched/wait.c:237 WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099 __might_sleep+0x114/0x160 kernel/sched/core.c:10099 RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099 Call Trace: <TASK> __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752 io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253 io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799 __io_uring_register io_uring/register.c:424 [inline] __do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77
CVE-2024-50140 1 Linux 1 Linux Kernel 2025-10-01 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: sched/core: Disable page allocation in task_tick_mm_cid() With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare.
CVE-2019-8998 1 Blackberry 1 Qnx Software Development Platform 2025-08-22 7.8 High
An information disclosure vulnerability leading to a potential local escalation of privilege in the procfs service (the /proc filesystem) of BlackBerry QNX Software Development Platform version(s) 6.5.0 SP1 and earlier could allow an attacker to potentially gain unauthorized access to a chosen process address space.
CVE-2024-26854 1 Linux 1 Linux Kernel 2025-05-04 7.5 High
In the Linux kernel, the following vulnerability has been resolved: ice: fix uninitialized dplls mutex usage The pf->dplls.lock mutex is initialized too late, after its first use. Move it to the top of ice_dpll_init. Note that the "err_exit" error path destroys the mutex. And the mutex is the last thing destroyed in ice_dpll_deinit. This fixes the following warning with CONFIG_DEBUG_MUTEXES: ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0 ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link) ice 0000:10:00.0: PTP init successful ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40 Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c> CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3 Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023 Workqueue: events work_for_cpu_fn RIP: 0010:__mutex_lock+0x773/0xd40 Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a> RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8 FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x84/0x170 ? __mutex_lock+0x773/0xd40 ? report_bug+0x1c7/0x1d0 ? prb_read_valid+0x1b/0x30 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __mutex_lock+0x773/0xd40 ? rcu_is_watching+0x11/0x50 ? __kmalloc_node_track_caller+0x346/0x490 ? ice_dpll_lock_status_get+0x28/0x50 [ice] ? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice] ? ice_dpll_lock_status_get+0x28/0x50 [ice] ice_dpll_lock_status_get+0x28/0x50 [ice] dpll_device_get_one+0x14f/0x2e0 dpll_device_event_send+0x7d/0x150 dpll_device_register+0x124/0x180 ice_dpll_init_dpll+0x7b/0xd0 [ice] ice_dpll_init+0x224/0xa40 [ice] ? _dev_info+0x70/0x90 ice_load+0x468/0x690 [ice] ice_probe+0x75b/0xa10 [ice] ? _raw_spin_unlock_irqrestore+0x4f/0x80 ? process_one_work+0x1a3/0x500 local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x17/0x30 process_one_work+0x20d/0x500 worker_thread+0x1df/0x3e0 ? __pfx_worker_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> irq event stamp: 125197 hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0 hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0 softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 ---[ end trace 0000000000000000 ]---
CVE-2024-26627 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host lock every time for deciding if error handler kthread needs to be waken up. This can be too heavy in case of recovery, such as: - N hardware queues - queue depth is M for each hardware queue - each scsi_host_busy() iterates over (N * M) tag/requests If recovery is triggered in case that all requests are in-flight, each scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called for the last in-flight request, scsi_host_busy() has been run for (N * M - 1) times, and request has been iterated for (N*M - 1) * (N * M) times. If both N and M are big enough, hard lockup can be triggered on acquiring host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169). Fix the issue by calling scsi_host_busy() outside the host lock. We don't need the host lock for getting busy count because host the lock never covers that. [mkp: Drop unnecessary 'busy' variables pointed out by Bart]
CVE-2023-52855 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL check of "urb->hcpriv" can be executed before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL pointer dereference. This possible bug is found by an experimental static analysis tool developed by myself. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported, when my tool analyzes the source code of Linux 6.5. To fix this possible bug, "urb->hcpriv = NULL" should be executed with holding the lock "hsotg->lock". After using this patch, my tool never reports the possible bug, with the kernelconfiguration allyesconfig for x86_64. Because I have no associated hardware, I cannot test the patch in runtime testing, and just verify it according to the code logic.
CVE-2023-52800 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-05-04 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.
CVE-2023-52785 1 Linux 1 Linux Kernel 2025-05-04 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR If command timeout happens and cq complete IRQ is raised at the same time, ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the ISR. Error log: ufshcd_abort: Device abort task at tag 18 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44 lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114
CVE-2023-52765 1 Linux 1 Linux Kernel 2025-05-04 6.2 Medium
In the Linux kernel, the following vulnerability has been resolved: mfd: qcom-spmi-pmic: Fix revid implementation The Qualcomm SPMI PMIC revid implementation is broken in multiple ways. First, it assumes that just because the sibling base device has been registered that means that it is also bound to a driver, which may not be the case (e.g. due to probe deferral or asynchronous probe). This could trigger a NULL-pointer dereference when attempting to access the driver data of the unbound device. Second, it accesses driver data of a sibling device directly and without any locking, which means that the driver data may be freed while it is being accessed (e.g. on driver unbind). Third, it leaks a struct device reference to the sibling device which is looked up using the spmi_device_from_of() every time a function (child) device is calling the revid function (e.g. on probe). Fix this mess by reimplementing the revid lookup so that it is done only at probe of the PMIC device; the base device fetches the revid info from the hardware, while any secondary SPMI device fetches the information from the base device and caches it so that it can be accessed safely from its children. If the base device has not been probed yet then probe of a secondary device is deferred.
CVE-2023-52589 1 Linux 1 Linux Kernel 2025-05-04 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: media: rkisp1: Fix IRQ disable race issue In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the interrupts and then apparently assumes that the interrupt handler won't be running, and proceeds in the stop procedure. This is not the case, as the interrupt handler can already be running, which would lead to the ISP being disabled while the interrupt handler handling a captured frame. This brings up two issues: 1) the ISP could be powered off while the interrupt handler is still running and accessing registers, leading to board lockup, and 2) the interrupt handler code and the code that disables the streaming might do things that conflict. It is not clear to me if 2) causes a real issue, but 1) can be seen with a suitable delay (or printk in my case) in the interrupt handler, leading to board lockup.
CVE-2021-47091 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it.
CVE-2021-47088 1 Linux 1 Linux Kernel 2025-05-04 7.0 High
In the Linux kernel, the following vulnerability has been resolved: mm/damon/dbgfs: protect targets destructions with kdamond_lock DAMON debugfs interface iterates current monitoring targets in 'dbgfs_target_ids_read()' while holding the corresponding 'kdamond_lock'. However, it also destructs the monitoring targets in 'dbgfs_before_terminate()' without holding the lock. This can result in a use_after_free bug. This commit avoids the race by protecting the destruction with the corresponding 'kdamond_lock'.
CVE-2021-47056 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown() before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the vf2pf_lock is initialized in adf_dev_init(), which can fail and when it fail, the vf2pf_lock is either not initialized or destroyed, a subsequent use of vf2pf_lock will cause issue. To fix this issue, only set this flag if adf_dev_init() returns 0. [ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0 [ 7.180345] Call Trace: [ 7.182576] mutex_lock+0xc9/0xd0 [ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat] [ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat] [ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat] [ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]
CVE-2021-46971 1 Linux 1 Linux Kernel 2025-05-04 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix unconditional security_locked_down() call Currently, the lockdown state is queried unconditionally, even though its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in attr.sample_type. While that doesn't matter in case of the Lockdown LSM, it causes trouble with the SELinux's lockdown hook implementation. SELinux implements the locked_down hook with a check whether the current task's type has the corresponding "lockdown" class permission ("integrity" or "confidentiality") allowed in the policy. This means that calling the hook when the access control decision would be ignored generates a bogus permission check and audit record. Fix this by checking sample_type first and only calling the hook when its result would be honored.
CVE-2021-46927 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert After commit 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()"), the call to get_user_pages() will trigger the mmap assert. static inline void mmap_assert_locked(struct mm_struct *mm) { lockdep_assert_held(&mm->mmap_lock); VM_BUG_ON_MM(!rwsem_is_locked(&mm->mmap_lock), mm); } [ 62.521410] kernel BUG at include/linux/mmap_lock.h:156! ........................................................... [ 62.538938] RIP: 0010:find_vma+0x32/0x80 ........................................................... [ 62.605889] Call Trace: [ 62.608502] <TASK> [ 62.610956] ? lock_timer_base+0x61/0x80 [ 62.614106] find_extend_vma+0x19/0x80 [ 62.617195] __get_user_pages+0x9b/0x6a0 [ 62.620356] __gup_longterm_locked+0x42d/0x450 [ 62.623721] ? finish_wait+0x41/0x80 [ 62.626748] ? __kmalloc+0x178/0x2f0 [ 62.629768] ne_set_user_memory_region_ioctl.isra.0+0x225/0x6a0 [nitro_enclaves] [ 62.635776] ne_enclave_ioctl+0x1cf/0x6d7 [nitro_enclaves] [ 62.639541] __x64_sys_ioctl+0x82/0xb0 [ 62.642620] do_syscall_64+0x3b/0x90 [ 62.645642] entry_SYSCALL_64_after_hwframe+0x44/0xae Use get_user_pages_unlocked() when setting the enclave memory regions. That's a similar pattern as mmap_read_lock() used together with get_user_pages().