Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409268 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31449 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code. | ||||
| CVE-2026-31448 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid infinite loops caused by residual data On the mkdir/mknod path, when mapping logical blocks to physical blocks, if inserting a new extent into the extent tree fails (in this example, because the file system disabled the huge file feature when marking the inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to reclaim the physical block without deleting the corresponding data in the extent tree. This causes subsequent mkdir operations to reference the previously reclaimed physical block number again, even though this physical block is already being used by the xattr block. Therefore, a situation arises where both the directory and xattr are using the same buffer head block in memory simultaneously. The above causes ext4_xattr_block_set() to enter an infinite loop about "inserted" and cannot release the inode lock, ultimately leading to the 143s blocking problem mentioned in [1]. If the metadata is corrupted, then trying to remove some extent space can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE was passed, remove space wrongly update quota information. Jan Kara suggests distinguishing between two cases: 1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully consistent and we must maintain its consistency including all the accounting. However these errors can happen only early before we've inserted the extent into the extent tree. So current code works correctly for this case. 2) Some other error - this means metadata is corrupted. We should strive to do as few modifications as possible to limit damage. So I'd just skip freeing of allocated blocks. [1] INFO: task syz.0.17:5995 blocked for more than 143 seconds. Call Trace: inode_lock_nested include/linux/fs.h:1073 [inline] __start_dirop fs/namei.c:2923 [inline] start_dirop fs/namei.c:2934 [inline] | ||||
| CVE-2026-31447 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it. | ||||
| CVE-2026-31446 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. | ||||
| CVE-2026-31442 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes. | ||||
| CVE-2026-31436 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc() At the end of this function, d is the traversal cursor of flist, but the code completes found instead. This can lead to issues such as NULL pointer dereferences, double completion, or descriptor leaks. Fix this by completing d instead of found in the final list_for_each_entry_safe() loop. | ||||
| CVE-2026-31435 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it. | ||||
| CVE-2026-31426 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC | ||||
| CVE-2026-31419 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== | ||||
| CVE-2026-31414 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use expect->helper Use expect->helper in ctnetlink and /proc to dump the helper name. Using nfct_help() without holding a reference to the master conntrack is unsafe. Use exp->master->helper in ctnetlink path if userspace does not provide an explicit helper when creating an expectation to retain the existing behaviour. The ctnetlink expectation path holds the reference on the master conntrack and nf_conntrack_expect lock and the nfnetlink glue path refers to the master ct that is attached to the skb. | ||||
| CVE-2026-31408 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately releases the lock without holding a reference to the socket. A concurrent close() can free the socket between the lock release and the subsequent sk->sk_state access, resulting in a use-after-free. Other functions in the same file (sco_sock_timeout(), sco_conn_del()) correctly use sco_sock_hold() to safely hold a reference under the lock. Fix by using sco_sock_hold() to take a reference before releasing the lock, and adding sock_put() on all exit paths. | ||||
| CVE-2026-31407 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: add missing netlink policy validations Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink. These attributes are used by the kernel without any validation. Extend the netlink policies accordingly. Quoting the reporter: nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE value directly to ct->proto.sctp.state without checking that it is within the valid range. [..] and: ... with exp->dir = 100, the access at ct->master->tuplehash[100] reads 5600 bytes past the start of a 320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by UBSAN. | ||||
| CVE-2026-31403 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage. | ||||
| CVE-2026-31402 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. | ||||
| CVE-2026-31401 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: prevent buffer overflow in hid_hw_request right now the returned value is considered to be always valid. However, when playing with HID-BPF, the return value can be arbitrary big, because it's the return value of dispatch_hid_bpf_raw_requests(), which calls the struct_ops and we have no guarantees that the value makes sense. | ||||
| CVE-2026-31393 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access l2cap_information_rsp() checks that cmd_len covers the fixed l2cap_info_rsp header (type + result, 4 bytes) but then reads rsp->data without verifying that the payload is present: - L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads 4 bytes past the header (needs cmd_len >= 8). - L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header (needs cmd_len >= 5). A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an out-of-bounds read of adjacent skb data. Guard each data access with the required payload length check. If the payload is too short, skip the read and let the state machine complete with safe defaults (feat_mask and remote_fixed_chan remain zero from kzalloc), so the info timer cleanup and l2cap_conn_start() still run and the connection is not stalled. | ||||
| CVE-2026-31392 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix krb5 mount with username option Customer reported that some of their krb5 mounts were failing against a single server as the client was trying to mount the shares with wrong credentials. It turned out the client was reusing SMB session from first mount to try mounting the other shares, even though a different username= option had been specified to the other mounts. By using username mount option along with sec=krb5 to search for principals from keytab is supported by cifs.upcall(8) since cifs-utils-4.8. So fix this by matching username mount option in match_session() even with Kerberos. For example, the second mount below should fail with -ENOKEY as there is no 'foobar' principal in keytab (/etc/krb5.keytab). The client ends up reusing SMB session from first mount to perform the second one, which is wrong. ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for testuser@ZELDA.TEST: ktutil: write_kt /etc/krb5.keytab ktutil: quit $ klist -ke Keytab name: FILE:/etc/krb5.keytab KVNO Principal ---- ---------------------------------------------------------------- 1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96) $ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser $ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar $ mount -t cifs | grep -Po 'username=\K\w+' testuser testuser ``` | ||||
| CVE-2026-31389 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free on controller registration failure Make sure to deregister from driver core also in the unlikely event that per-cpu statistics allocation fails during controller registration to avoid use-after-free (of driver resources) and unclocked register accesses. | ||||
| CVE-2026-23466 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Open-code GGTT MMIO access protection GGTT MMIO access is currently protected by hotplug (drm_dev_enter), which works correctly when the driver loads successfully and is later unbound or unloaded. However, if driver load fails, this protection is insufficient because drm_dev_unplug() is never called. Additionally, devm release functions cannot guarantee that all BOs with GGTT mappings are destroyed before the GGTT MMIO region is removed, as some BOs may be freed asynchronously by worker threads. To address this, introduce an open-coded flag, protected by the GGTT lock, that guards GGTT MMIO access. The flag is cleared during the dev_fini_ggtt devm release function to ensure MMIO access is disabled once teardown begins. (cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) | ||||
| CVE-2026-23462 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: Fix possible UAF This fixes the following trace caused by not dropping l2cap_conn reference when user->remove callback is called: [ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00 [ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy) [ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 97.809947] Call Trace: [ 97.809954] <TASK> [ 97.809961] dump_stack_lvl (lib/dump_stack.c:122) [ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808) [ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798) [ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1)) [ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341) [ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2)) [ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360) [ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285) [ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5)) [ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752) [ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716) [ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691) [ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678) [ 97.810404] __fput (fs/file_table.c:470) [ 97.810430] task_work_run (kernel/task_work.c:235) [ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201) [ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5)) [ 97.810527] do_exit (kernel/exit.c:972) [ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810574] ? __pfx_do_exit (kernel/exit.c:897) [ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6)) [ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4)) [ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1)) [ 97.810721] do_group_exit (kernel/exit.c:1093) [ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1)) [ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366) [ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810826] ? vfs_read (fs/read_write.c:555) [ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800) [ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555) [ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810960] arch_do_signal_or_restart (arch/ ---truncated--- | ||||