| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: drop RX packets with a short Ethernet header
handle_incoming_queue() pulls pull_to bytes into the head before
calling eth_type_trans(). pull_to is the length of the first RX slot,
capped at RX_COPY_THRESHOLD, and that length comes from the backend.
Nothing checks it against ETH_HLEN.
If the first slot is shorter than ETH_HLEN and more slots follow, the
head ends up shorter than an Ethernet header while skb->len is longer,
and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is
shorter than ETH_HLEN, eth_type_trans() reads the header past the end
of the data instead.
Pull at least ETH_HLEN, and drop the packet if that fails, which also
drops packets too short to hold an Ethernet header. This also checks
the return value of the pull, which was ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: devres: fix race between concurrent revokers
There is a potential race condition when two paths try to revoke a
Devres concurrently.
The driver core's devres_release_all() calls Revocable::revoke() via the
release callback, while Devres::drop() calls revoke_nosync() on another
CPU.
The revoker that does not claim the is_available swap returns
immediately, but the revoker that did may still be executing
drop_in_place() on the inner data. This can cause a use-after-free when
the other revoker's caller proceeds to drop adjacent resources that
drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with
SGTable freeing the backing sg_table and pages).
Fix this by adding a Completion. The release callback signals the
Completion after revoke() finishes, and Devres::drop() waits for it when
it loses the is_available swap. This ensures the wrapped object is fully
torn down before Devres::drop() returns. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: initialize inode mapping flags for cached inodes
[BUG]
When running generic/795 with 8K block size, 4K page size, the test
always fails, triggering some ASSERT()s related to folio size:
795 (241074): drop_caches: 3
assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0)
------------[ cut here ]------------
kernel BUG at extent_io.c:1404!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs]
Call Trace:
<TASK>
btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
iter_file_splice_write+0x31a/0x540
direct_splice_actor+0x53/0x170
splice_direct_to_actor+0xe9/0x240
do_splice_direct+0x76/0xb0
vfs_copy_file_range+0x1fd/0x630
__x64_sys_copy_file_range+0xf9/0x220
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The ASSERT() itself is added by a later patch.
The crash is triggered with that new debug patch, and without this fix.
[CAUSE]
In the above case, the start 16826368 is properly 8K aligned, but the
end (16830463 + 1) is not 8K aligned.
Furthermore the mapping's minimal folio order is 0, not the expected 1
for 8K block size with 4K page size.
So this means some inodes do not have btrfs_set_inode_mapping_order()
called on it.
The missing btrfs_set_inode_mapping_order() call happens for cached
inodes, through the following events:
- btrfs_create_new_inode() called for inode X
Which properly sets minimal folio order for the VFS inode.
- btrfs_update_inode() called for inode X
Which calls btrfs_delayed_update_inode() to create a delayed_node
into root->delayed_nodes xarray.
- Drop cache/memory pressure, evicting in-memory inode X
Which evicted the inode X, but delayed_node is still in
root->delayed_nodes for future reuse.
- btrfs_iget() for inode X called again
btrfs_iget()
|- btrfs_iget_locked()
| |- iget5_locked_rcu()
| Which creates a new vfs_inode for btrfs, whose mapping still
| has the minimal order as 0.
|
|- btrfs_read_locked_inode()
|- btrfs_fill_inode()
| |- btrfs_get_delayed_node()
| Which found out the previous node, and use that delayed
| node to initialize the new inode.
|
|- filled = true;
|- if (filled) goto cache_index;
Which skips the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls.
So the inode still has minimal folio order set as 0, not
the required 1.
Thus later page cache read will get a folio whose size is smaller than
block size, as the mapping has its minimal folio order set as 0 not 1,
then trigger the ASSERT().
[FIX]
Move the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls under cache_index label,
so that the mapping flags and minimal folio order is always set
no matter if we have a cached inode. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: initialise workingset state before folio split
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state. |
| In the Linux kernel, the following vulnerability has been resolved:
fs,fsverity: remove check for fsverity being enabled in setattr_prepare()
The check that fs-verity is available in the kernel is not necessary
here. Filesystems could have fsverity files even without fs-verity
enabled. In that case, truncate on fsverity file will succeed, what this
check is trying to prevent. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Sync page pool RX frags for CPU
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack. |
| Frappe CRM 1.49.0 through 1.87.0 contains a missing authorization vulnerability in crm.api.doc.get_linked_docs_of_document that allows authenticated users to read linked documents without permission checks. Attackers can name a lead, deal, comment or user they cannot read to obtain linked call log phone numbers, deal organizations and mention notification text. |
| Corteza through 2024.9.10 contains an incorrect authorization vulnerability in compose attachment endpoints that allows unauthenticated attackers to download private attachments by setting the URL kind segment to page, icon, or namespace. Attackers who know a private record or module attachment id can request the original or preview route without a token or signature to retrieve files across namespace and record permission boundaries. |
| OpenAgents Workspace backend through launcher-v1.0.17 contains an information disclosure vulnerability that allows unauthenticated attackers to list all workspaces via GET /v1/workspaces. Attackers can read the unmasked browserfabric_api_key in each workspace's settings map, along with workspace ids, slugs, creator emails and member lists. |
| CoreShop through 2026.2.2 contains a missing authorization vulnerability that allows low-privileged backend users to list permission-restricted resources because ResourceController listAction skips the isGrantedOr403() check. Authenticated Pimcore users lacking resource permissions can request the generated list routes to enumerate payment providers, carriers, price rules, stores, and tax rules including ids, names, and identifiers. |
| The Download Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'not_found' parameter in all versions up to, and including, 3.3.58 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `givewp_campaign_grid` shortcode in versions up to, and including, 4.17.0 This is due to insufficient input sanitization and output escaping on user supplied shortcode attributes (`filter_by`, `layout`, `sort_by`, `order_by`) in the CampaignGridShortcode::parseAttributes() function combined with the render template emitting `json_encode($attributes)` inside a single-quoted HTML attribute without esc_attr() — json_encode() does not escape single quotes by default, so a `'` in an attribute value breaks out of the enclosing attribute. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The FV Flowplayer Video Player plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Unquoted popup Shortcode Attribute in all versions up to, and including, 7.5.54.7212 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires the profile_videos_enable_bio option to be enabled, as script execution occurs on the author bio/archive page where the profile-video shortcode is rendered. |
| The Email Marketing for WordPress and WooCommerce – Retainful plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'data' parameter in all versions up to, and including, 1.0.10 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Avada | Website Builder For WordPress & WooCommerce theme for WordPress is vulnerable to Stored Cross-Site Scripting via the user profile 'Author Page' social link contact-method fields (author_facebook, author_twitter, author_linkedin, author_dribble, author_whatsapp, author_email) in versions up to, and including, 7.16.1. Avada registers these fields through the user_contactmethods filter and, on the author archive, emits them inside an anchor href using only esc_attr() in Fusion_Social_Icon::get_markup(), which escapes HTML metacharacters but does not reject dangerous URL schemes such as javascript:. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses their author page and clicks the injected social icon (a click is required, and the site must have 'Open Social Icons in a New Window' set to Off so the browser doesn't block the javascript: URL from opening in a new tab). |
| Executable Regular Expression Error vulnerability in WP Media WP Rocket wp-rocket allows Code Injection.This issue affects WP Rocket: from n/a before 3.23.5. |
| The Post Grid Gutenberg Blocks – PostX plugin for WordPress is vulnerable to Stored Cross-Site Scripting via display_name User Field in all versions up to, and including, 5.1.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress core's pre_user_display_name filter encodes &, <, and > but leaves double-quotes intact (ENT_NOQUOTES), allowing a Subscriber-level user to store a double-quote in their display_name via /wp-admin/profile.php that subsequently breaks out of the alt="" attribute at Archive_Title.php:144. |
| The WPO365 | SEAMLESS WORDPRESS + MICROSOFT INTEGRATION (WPO365 | LOGIN) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'id_token' parameter in all versions up to, and including, 44.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload is stored in the wpo365_errors transient for up to three days by submitting a crafted unauthenticated request with a forged id_token whose base64url-decoded unique_name or iss claim contains malicious HTML, requiring no prior authentication or user interaction beyond an administrator later visiting the WPO365 wizard page. |
