| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| XZ Utils provide a general-purpose data-compression library plus command-line tools. Prior to version 5.8.3, if lzma_index_decoder() was used to decode an Index that contained no Records, the resulting lzma_index was left in a state where where a subsequent lzma_index_append() would allocate too little memory, and a buffer overflow would occur. This issue has been patched in version 5.8.3. |
| Addressable is an alternative implementation to the URI implementation that is part of Ruby's standard library. From 2.3.0 to before 2.9.0, within the URI template implementation in Addressable, two classes of URI template generate regular expressions vulnerable to catastrophic backtracking. Templates using the * (explode) modifier with any expansion operator (e.g., {foo*}, {+var*}, {#var*}, {/var*}, {.var*}, {;var*}, {?var*}, {&var*}) generate patterns with nested unbounded quantifiers that are O(2^n) when matched against a maliciously crafted URI. Templates using multiple variables with the + or # operators (e.g., {+v1,v2,v3}) generate patterns with O(n^k) complexity due to the comma separator being within the matched character class, causing ambiguous backtracking across k variables. When matched against a maliciously crafted URI, this can result in catastrophic backtracking and uncontrolled resource consumption, leading to denial of service. This vulnerability is fixed in 2.9.0. |
| Incorrect boundary conditions in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8. |
| Incorrect boundary conditions in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8. |
| Sandbox escape due to incorrect boundary conditions in the Graphics: WebRender component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8. |
| dynaconf is a configuration management tool for Python. Prior to version 3.2.13, Dynaconf is vulnerable to Server-Side Template Injection (SSTI) due to unsafe template evaluation in the @Jinja resolver. When the jinja2 package is installed, Dynaconf evaluates template expressions embedded in configuration values without a sandboxed environment. This issue has been patched in version 3.2.13. |
| Gotenberg is an API for converting document formats. In 8.29.1 and earlier, Gotenberg uses dlclark/regexp2 to compile user-supplied scope patterns without setting a proper timeout. Users with access to features using this logic can hang workers indefinitely. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. From 45.0.0 to before 46.0.7, if a non-contiguous buffer was passed to APIs which accepted Python buffers (e.g. Hash.update()), this could lead to buffer overflows. This vulnerability is fixed in 46.0.7. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. From 5.0.0 to 6.2.0, a denial-of-service condition exists in fast-jwt when the allowedAud verification option is configured using a regular expression. Because the aud claim is attacker-controlled and the library evaluates it against the supplied RegExp, a crafted JWT can trigger catastrophic backtracking in the JavaScript regex engine, resulting in significant CPU consumption during verification. This vulnerability is fixed in 6.2.1. |
| goshs is a SimpleHTTPServer written in Go. From 1.0.7 to before 2.0.0-beta.4, the SFTP command rename sanitizes only the source path and not the destination, so it is possible to write outside of the root directory of the SFTP. This vulnerability is fixed in 2.0.0-beta.4. |
| GIMP JP2 File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of JP2 files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28863. |
| Epross AVCON6 systems management platform contains an object-graph navigation language (OGNL) injection vulnerability that allows unauthenticated attackers to execute arbitrary commands by injecting malicious OGNL expressions. Attackers can send crafted requests to the login.action endpoint with OGNL payloads in the redirect parameter to instantiate ProcessBuilder objects and execute system commands with root privileges. |
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems.
* vulnerabilities:
*
Improper Neutralization of Special Elements used in a Command ('Command Injection')
* Use of Hard-coded Credentials
* Improper Authentication
* Binding to an Unrestricted IP Address
The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. |
| In ConnMan through 1.44, parse_rr in dnsproxy.c has a memcpy length that depends on an RR RDLENGTH value, i.e., *rdlen=ntohs(rr->rdlen) and memcpy(response+offset,*end,*rdlen) without a check for whether the sum of *end and *rdlen exceeds max. Consequently, *rdlen may be larger than the amount of remaining packet data in the current state of parsing. Values of stack memory locations may be sent over the network in a response. |
| A vulnerability was identified in TRENDnet TI-G160i, TI-PG102i and TPL-430AP up to 20250724. This affects an unknown part of the component SSH Service. The manipulation leads to use of default credentials. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor explains: "For product TI-PG102i and TI-G160i, by default, the product's remote management options are all disabled. The root account is for troubleshooting purpose and the password is encrypted. However, we will remove the root account from the next firmware release. For product TPL-430AP, the initial setup process requires user to set the password for the management GUI. Once that was done, the default password will be invalid." |
| A vulnerability exists in NeuVector versions up to and including 5.4.5, where a fixed string is used as the default password for the built-in `admin` account. If this password is not changed immediately after deployment, any workload with network access within the cluster could use the default credentials to obtain an authentication token. This token can then be used to perform any operation via NeuVector APIs. |
| A vulnerability has been identified in Industrial Edge Device Kit - arm64 V1.17 (All versions), Industrial Edge Device Kit - arm64 V1.18 (All versions), Industrial Edge Device Kit - arm64 V1.19 (All versions), Industrial Edge Device Kit - arm64 V1.20 (All versions < V1.20.2-1), Industrial Edge Device Kit - arm64 V1.21 (All versions < V1.21.1-1), Industrial Edge Device Kit - x86-64 V1.17 (All versions), Industrial Edge Device Kit - x86-64 V1.18 (All versions), Industrial Edge Device Kit - x86-64 V1.19 (All versions), Industrial Edge Device Kit - x86-64 V1.20 (All versions < V1.20.2-1), Industrial Edge Device Kit - x86-64 V1.21 (All versions < V1.21.1-1), Industrial Edge Own Device (IEOD) (All versions < V1.21.1-1-a), Industrial Edge Virtual Device (All versions < V1.21.1-1-a), SCALANCE LPE9413 (6GK5998-3GS01-2AC2) (All versions < V2.1), SIMATIC IPC BX-39A Industrial Edge Device (All versions < V3.0), SIMATIC IPC BX-59A Industrial Edge Device (All versions < V3.0), SIMATIC IPC127E Industrial Edge Device (All versions < V3.0), SIMATIC IPC227E Industrial Edge Device (All versions < V3.0), SIMATIC IPC427E Industrial Edge Device (All versions < V3.0), SIMATIC IPC847E Industrial Edge Device (All versions < V3.0). Affected devices do not properly enforce user authentication on specific API endpoints when identity federation is used. This could facilitate an unauthenticated remote attacker to circumvent authentication and impersonate a legitimate user. Successful exploitation requires that identity federation is currently or has previously been used and the attacker has learned the identity of a legitimate user. |
| Mail-0's Zero is an open-source email solution. In version 0.8 it's possible for an attacker to craft an email that executes javascript leading to session hijacking due to improper sanitization. This issue has been patched in version 0.81. |
| ReDoS in strip_whitespaces() function in cps/string_helper.py in Calibre Web and Autocaliweb allows unauthenticated remote attackers to cause denial of service via specially crafted username parameter that triggers catastrophic backtracking during login. This issue affects Calibre Web: 0.6.24 (Nicolette); Autocaliweb: from 0.7.0 before 0.7.1. |
| Securden’s Unified PAM Remote Vendor Gateway access portal shares infrastructure and access tokens across multiple tenants. A malicious actor can obtain authentication material and access the gateway server with low-privilege permissions. |
