| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.7.1 to 2.11.0, mergeCellsParser leaves the cached rectangle empty for an empty mergeCell ref and then passes that empty slice to cellInRange without a length check. GetCellValue reaches mergeCellsParser, which passes an empty rectangle derived from the mergeCell ref attribute into cellInRange. When a crafted worksheet contains an empty mergeCell ref and a non-streaming cell API reads the worksheet, cellInRange indexes four positions in an empty slice, allowing an attacker to panic on the first affected cell operation. No fixed version is available as of this review. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.7.0 to 2.11.0, conditional-format extraction indexes required child slices or dereferences an optional colorScale child without validating malformed rule structure. GetConditionalFormats reaches extractCondFmtCellIs and also indexes ColorScale.Cfvo, DataBar.Cfvo, and DataBar.Color without complete structural checks. When a crafted worksheet supplies a cellIs, dataBar, or colorScale rule missing expected children and the application calls GetConditionalFormats, missing formula, color, value-object, or colorScale data reaches an out-of-range index or nil dereference, allowing an attacker to panic and terminate an unprotected process. No fixed version is available as of this review. |
| A regression caused by an API change in SAP ABAP Platform reintroduces a previously fixed authorization weakness. The session manager can be opened in single transaction mode, including from FLP. A low-privileged attacker could exploit this to bypass restrictions via specially crafted requests, resulting in high impact on integrity and low impact on confidentiality. There is no impact on availability. |
| SAP UI5 does not perform sufficient input validation under certain configurations. An attacker with low privileges could submit specially crafted content that is later rendered in a victim's browser. This vulnerability has a low impact on confidentiality and integrity. There is no impact on availability. |
| The HybridTokenAuthenticator component of the SAP/cloud-security-services-integration-library accepts tokens from unintended ambient IAS/XSUAA bindings, potentially allowing unauthorized access. This vulnerability allows an attacker to gain unauthorized access to the system by using tokens that should not be accepted, leading to a breach of security. |
| Wazuh from 3.12.0 before 4.14.8 contains a heap buffer overflow in fim_generate_alert() where full_log is sized from input but written bounded by OS_MAXSTR. An enrolled agent can send a crafted FIM syscheck event to corrupt manager heap memory and deterministically crash wazuh-analysisd, causing a fleet-wide detection outage. |
| SAP NetWeaver and SAP Web Dispatcher do not properly validate certain fields in specially crafted requests handled by an internal protocol component. An unauthenticated attacker could send a malicious request that triggers a memory-handling error, causing the affected process to crash. Successful exploitation can therefore result in a high impact on the availability of the affected application. There is no impact on the confidentiality or integrity of the application. |
| SAP Cloud Connector contains an improper authorization check, which could be exploited by a low-privileged attacker through specially crafted requests. Exploitation requires the attacker to be on an adjacent network. Successful exploitation could allow the attacker to obtain limited information about internal systems, resulting in low impact on confidentiality. There is no impact on integrity and availability. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In commit cfddd56 and earlier, an unauthenticated host on the same link can first obtain two bindings through normal DHCPv6 SOLICIT and REQUEST exchanges and then send a crafted RENEW containing multiple IA_NA options. An earlier matched IA consumes most of the response buffer, an unmatched IA causes the build_ia() status branch to write and return a NOBINDING response larger than the remaining space, and a subsequent matched IA is processed after dhcpv6_ia_handle_IAs() subtracts that over-return from an unsigned size_t. The resulting underflow disables subsequent length checks and permits attacker-controlled IA_ADDR serialization beyond the 512-byte stack buffer pdbuf in handle_client_request(). The stack canary terminates odhcpd, and sustained packets can repeatedly disrupt DHCPv6 service while procd respawns the process. The observed configuration does not establish code execution. |
| FreeRDP from 3.0.0 before 3.32.0 contains a heap out-of-bounds read vulnerability that allows a malicious RD Gateway to crash clients by sending mismatched message lengths. Attackers controlling the gateway can set MsgBytes far larger than the NDR string ActualCount in consent or service messages, causing UTF-8 conversion to read past the stream allocation and disrupt client availability. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.1.0 to 2.11.0, a Zip64 uncompressed size with the high bit set is converted from uint64 to a negative int64 before signed size-limit checks and allocation. ReadZipReader obtains UncompressedSize64 through FileInfo.Size and passes the wrapped negative value to readFile. When a crafted Zip64 entry declares an uncompressed size from 2^63 through 2^64-1 and the workbook is opened, the negative size bypasses unzip limits and reaches make as a negative capacity, allowing an attacker to panic during workbook opening. No fixed version is available as of this review. |
| A vulnerability was detected in Tiiny-AI PowerInfer up to 8bd56d69906c9d2dba4d3bf6899763401e01a9a4. Affected is the function create_striped_mat_to_gpu of the file smallthinker/ggml/src/ggml-cuda/ggml-cuda.cu of the component FFN GPU-split Loader. The manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The pull request to fix this issue awaits acceptance. |
| When Brocade Fabric OS versions before 10.0.1 processes trunk configuration operations, the application parses user-supplied list strings into dynamically allocated heap arrays without enforcing boundary checks on the maximum allowable number of elements. An authenticated administrator can exploit this vulnerability via crafted REST API requests containing an excessive number of list delimiters, causing heap corruption that can result in service crash or arbitrary code execution. |
| FreeRDP 3.17.1 before 3.32.0 contains a heap buffer over-read vulnerability in DynvcTrackerHandleCreateBack of the freerdp-proxy DRDYNVC channel handler that allows malicious backend RDP servers to read heap memory out of bounds. Attackers can send a CREATE_REQUEST_PDU whose channel name lacks a NUL byte, causing an unbounded snprintf read that leaks memory into proxy logs or crashes the process. |
| A security flaw has been discovered in Furion .NET Framework up to 4.9.9.95. This affects the function RunCompile of the file framework/Furion/ViewEngine/Engines/ViewEngine.cs of the component View Engine. The manipulation of the argument content results in improper neutralization of special elements used in a template engine. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been identified in APOGEE MBC (PPC) (BACnet) (All versions), APOGEE MBC (PPC) (P2 Ethernet) (All versions), APOGEE MEC (PPC) (BACnet) (All versions), APOGEE MEC (PPC) (P2 Ethernet) (All versions), APOGEE PXC Compact (BACnet) (All versions < V3.5.7), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.21), APOGEE PXC Modular (BACnet) (All versions < V3.5.7), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.21), TALON TC Compact (BACnet) (All versions < V3.5.7), TALON TC Modular (BACnet) (All versions < V3.5.7). The affected product web service does not properly validate user input in multipart handling. This could allow an unauthenticated remote attacker to cause a denial of service. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.8.0 to 2.11.0, GetStyle's fill, border, and font extraction predicates check only upper bounds for attacker-controlled style-table indices. File.GetStyle relies on extractStyleCondFuncs predicates that allow negative FillID, BorderID, and FontID values to reach slice indexing. When a crafted styles.xml supplies a negative fillId, borderId, or fontId and the application reads the style, a negative identifier passes the upper-bound-only predicate and becomes a negative slice index, allowing an attacker to panic while reading cell styling. No fixed version is available as of this review. |
| OpENer v2.3/commit 76b95cf, contains an integer underflow in the server-side EtherNet/IP ForwardOpen connection-path parser. This allows a remote attacker to cause a denial of service |
| IBM Power Systems Firmware FW1060.00 through FW1060.81 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the FSP can write specially crafted configuration data to cause memory corruption in the host firmware boot stage during system IPL, compromising the host firmware boot stack and the hypervisor subsequently loaded by it. Successful exploitation results in a confidentiality, integrity, and availability impact to the managed system. |
