| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: rzv2h-ivc: Fix concurrent buffer list access
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
[assign ivc->buffers.curr in critical section as reported by Barnabas] |
| IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Limatek System Inc. LimRAD NAC allows Stored XSS.
This issue affects LimRAD NAC: before 5.5.7.3.9. |
| A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /edit_schoolyr.php. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix.
The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit.
Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: restrict number of unacked list entries
When the unacked_list is unbound, an attacker could send messages with
small lengths and appropriated seqno + gaps to force the receiver to
allocate more and more unacked_list entries. And the end either causing an
out-of-memory situation or increase the management overhead for the (large)
list that significant portions of CPU cycles are wasted in searching
through the list.
When limiting the list to a specific number, it is important to still
correctly add a new entry to the list. But if the list became larger than
the limit, the last entry of the list (with the highest seqno) must be
dropped to still allow the earlier seqnos to finish and therefore to
continue the process. Otherwise, the process might get stuck with too high
seqnos which are not handled by batadv_tp_ack_unordered(). |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe and sets up chained
handlers using irq_set_chained_handler_and_data(). However, on driver
removal, the generic chips are not freed and the chained handlers are
not removed.
The generic chips remain on the global gc_list and may later be accessed by
generic interrupt chip suspend, resume, or shutdown callbacks after the
driver has been removed, potentially resulting in a use-after-free and
kernel crash.
The chained handlers that were installed in probe for peripheral and
syswake interrupts are also left dangling, which can lead to spurious
interrupts accessing freed memory.
Fix these issues by:
- Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the
core code automatically removes generic chips when irq_domain_remove()
is called
- Clearing all chained handlers with NULL in pdc_intc_remove() |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov8856: free control handler on error in ov8856_init_controls()
The control handler wasn't freed if adding controls failed, add an error
exit label and convert the existing error return to use it. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix avdcache auditing
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
[PM: line wrap tweaks] |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. In versions 4.6.0 and above, prior to 4.14.5, a logic error in CheckRateLimitsMiddleware.dispatch() causes the /events endpoint rate check to unconditionally overwrite the general rate limit result. When the global max_request_per_minute is exceeded, requests to /events still succeed if the events-specific counter (hardcoded 30/min) has not been reached. This allows event injection into analysisd beyond the admin-configured global rate limit. This issue has been fixed in version 4.14.5. |
| Improper neutralization of input during web page generation ('cross-site scripting') in Windows Admin Center allows an unauthorized attacker to perform spoofing over a network. |
| Kirby is an open-source content management system. In versions prior to 4.9.1 and 5.4.1, the underlying URL methods for the KirbyTags and image blocks components did not filter out malicious URL values that resolve to script execution. The vulnerability affects four first-party Kirby renderers that produce `<a href="…">` output from editor-supplied field values: the (`link: …)` KirbyTag, the `link`: parameter of the `(image: …)` KirbyTag when it does not resolve to a known file or `self`, the `link` field of the built-in image block, and the HTML importer for the `blocks` field (which accepted the same malicious input as the image block `link` field). While simple `avascript:` URLs were already deactivated by treating them as a relative path and prepending a single slash to the URL, the use of URLs of the format `javascript://x%0A…` bypasses this protection. The `vbscript:`, `data:`, `livescript:`, `mocha:` and `jar:` schemes are affected by the same underlying gap. This issue has been fixed in versions 4.9.1 and 5.4.1. |
| Manyfold is an open source, self-hosted web application for managing a collection of 3d models, particularly focused on 3d printing. From 0.96.0 until 0.140.0, authenticated users can rename uploaded files with path traversal sequences because app/models/model_file.rb uses the user-controlled filename in File.join(model.path, filename) without sufficient sanitization, allowing files to be moved or written outside the configured library directory. This issue is fixed in version 0.140.0. |
| WWBN AVideo is an open source video platform. Versions 29.0 and below contain a Stored XSS vulnerability through the autoEvalCodeOnHTML parameter in the MessageSQLite WebSocket Handler. The MessageSQLite.php handler only strips autoEvalCodeOnHTML from $json['msg'], but msgToResourceId() reads from $msg['json'] with higher priority. An attacker can place the XSS payload in the json key instead of msg, bypassing the sanitization entirely. An authenticated attacker can execute arbitrary JavaScript in any connected user's browser session via the WebSocket messaging system, stealing session cookies and authentication tokens, taking over accounts through session hijacking, and chaining with CSRF to perform admin actions on the victim's behalf, in the default SQLite WebSocket backend configuration. This issue has a patch that has yet to be officially released, see https://github.com/WWBN/AVideo/commit/3e0b3ce2bfa766183ff0ae227439394db57b1a23. |
| NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.1.19, NocoBase @nocobase/plugin-backups restored PostgreSQL backups by interpolating the database.schema value from _metadata.json into shell command strings executed with Node.js child_process.exec(), allowing a backup-management user restoring a crafted backup to execute commands as the NocoBase server process. This vulnerability is fixed in 2.1.19. |
| DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase template static resources let authenticated users submit TemplateManageRequest.staticResource through POST /de2api/templateManage/save or DataVisualizationServer.decompression, after which StaticResourceServer.saveFilesToServe and StaticResourceServer.saveSingleFileToServe write Base64-decoded .svg content to /de2api/static-resource/<name>.svg without validating extension, MIME type, decoded bytes, or SVG scriptability, causing stored same-origin cross-site scripting when a victim loads the resource. This issue is fixed in version 2.10.23. |
| Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| SCRAM (Salted Challenge Response Authentication Mechanism) is part of the family of Simple Authentication and Security Layer (SASL, RFC 4422) authentication mechanisms. Prior to 3.3, a flaw in com.ongres.scram:scram-client and com.ongres.scram:scram-common allows an attacker capable of a TLS man-in-the-middle attack to silently downgrade a connection from SCRAM-SHA-256-PLUS with channel binding to standard SCRAM-SHA-256 without channel binding when TlsServerEndpoint processes an X.509 certificate using a modern signature algorithm such as Ed25519; getChannelBindingData() can return an empty byte array after NoSuchAlgorithmException, and the ScramClient builder treats that as absent channel-binding data. This issue is fixed in version 3.3. |
| Sigstore Timestamp Authority is a service for issuing RFC 3161 timestamps. Prior to 2.1.0, the global wrapMetrics middleware records raw HTTP request path r.URL.Path and raw HTTP request method r.Method as Prometheus labels for latency and request count metric vectors before routing, allowing an unauthenticated remote attacker to issue requests with random paths such as /api/v1/timestamp/<uuid> or random HTTP methods and create unbounded permanent time-series entries that exhaust memory. This issue is fixed in version 2.1.0. |
| Shopware is an open commerce platform. Prior to 6.6.10.18 and 6.7.10.1, SVG files are in the allowed_extensions whitelist in src/Core/Framework/Resources/config/packages/shopware.yaml and can be uploaded via the media manager without SVG content sanitization in the upload pipeline from MediaUploadController to FileSaver to TypeDetector, allowing malicious SVG JavaScript such as onload, <script>, and <foreignObject> to execute in the Shopware domain when the uploaded SVG is viewed. This issue is fixed in versions 6.6.10.18 and 6.7.10.1. |
