| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: ioam6: prevent schema length wraparound in trace fill
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent possible UaF in addrconf_permanent_addr()
The mentioned helper try to warn the user about an exceptional
condition, but the message is delivered too late, accessing the ipv6
after its possible deletion.
Reorder the statement to avoid the possible UaF; while at it, place the
warning outside the idev->lock as it needs no protection. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone device registration error path
If thermal_zone_device_register_with_trips() fails after registering
a thermal zone device, it needs to wait for the tz->removal completion
like thermal_zone_device_unregister(), in case user space has managed
to take a reference to the thermal zone device's kobject, in which case
thermal_release() may not be called by the error path itself and tz may
be freed prematurely.
Add the missing wait_for_completion() call to the thermal zone device
registration error path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Properly mark live registers for indirect jumps
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: define and enforce CEPH_MAX_KEY_LEN
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise
When user provides a bogus pat_index value through the madvise IOCTL, the
xe_pat_index_get_coh_mode() function performs an array access without
validating bounds. This allows a malicious user to trigger an out-of-bounds
kernel read from the xe->pat.table array.
The vulnerability exists because the validation in madvise_args_are_sane()
directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without
first checking if pat_index is within [0, xe->pat.n_entries).
Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug
builds, it still performs the unsafe array access in production kernels.
v2(Matthew Auld)
- Using array_index_nospec() to mitigate spectre attacks when the value
is used
v3(Matthew Auld)
- Put the declarations at the start of the block
(cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Add sanity check for OOB writes at silencing
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: clear cloned request bio pointer when last clone bio completes
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: move vdpa group bound check to vhost_vdpa
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: prevent races in ->query_interfaces()
It was possible for two query interface works to be concurrently trying
to update the interfaces.
Prevent this by checking and updating iface_last_update under
iface_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Refactor amdgpu_gem_va_ioctl for Handling Last Fence Update and Timeline Management v4
This commit simplifies the amdgpu_gem_va_ioctl function, key updates
include:
- Moved the logic for managing the last update fence directly into
amdgpu_gem_va_update_vm.
- Introduced checks for the timeline point to enable conditional
replacement or addition of fences.
v2: Addressed review comments from Christian.
v3: Updated comments (Christian).
v4: The previous version selected the fence too early and did not manage its
reference correctly, which could lead to stale or freed fences being used.
This resulted in refcount underflows and could crash when updating GPU
timelines.
The fence is now chosen only after the VA mapping work is completed, and its
reference is taken safely. After exporting it to the VM timeline syncobj, the
driver always drops its local fence reference, ensuring balanced refcounting
and avoiding use-after-free on dma_fence.
Crash signature:
[ 205.828135] refcount_t: underflow; use-after-free.
[ 205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
[ 206.074014] Call Trace:
[ 206.076488] <TASK>
[ 206.078608] amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu]
[ 206.084040] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.089994] drm_ioctl_kernel+0x86/0xe0 [drm]
[ 206.094415] drm_ioctl+0x26e/0x520 [drm]
[ 206.098424] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.104402] amdgpu_drm_ioctl+0x4b/0x80 [amdgpu]
[ 206.109387] __x64_sys_ioctl+0x96/0xe0
[ 206.113156] do_syscall_64+0x66/0x2d0
...
[ 206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90
...
[ 206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.553405] Call Trace:
[ 206.553409] <IRQ>
[ 206.553415] ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched]
[ 206.553424] dma_fence_signal+0x30/0x60
[ 206.553427] drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched]
[ 206.553434] dma_fence_signal_timestamp_locked+0x6e/0xe0
[ 206.553437] dma_fence_signal+0x30/0x60
[ 206.553441] amdgpu_fence_process+0xd8/0x150 [amdgpu]
[ 206.553854] sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu]
[ 206.554353] edac_mce_amd(E) ee1004(E)
[ 206.554270] amdgpu_irq_dispatch+0x150/0x230 [amdgpu]
[ 206.554702] amdgpu_ih_process+0x6a/0x180 [amdgpu]
[ 206.555101] amdgpu_irq_handler+0x23/0x60 [amdgpu]
[ 206.555500] __handle_irq_event_percpu+0x4a/0x1c0
[ 206.555506] handle_irq_event+0x38/0x80
[ 206.555509] handle_edge_irq+0x92/0x1e0
[ 206.555513] __common_interrupt+0x3e/0xb0
[ 206.555519] common_interrupt+0x80/0xa0
[ 206.555525] </IRQ>
[ 206.555527] <TASK>
...
[ 206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.555667] Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len(). |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix locking usage for tcon fields
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate sequence number of TX release report
Hardware rarely reports abnormal sequence number in TX release report,
which will access out-of-bounds of wd_ring->pages array, causing NULL
pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U
6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1)
Call Trace:
<IRQ>
rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)]
rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)]
net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759
handle_softirqs+0xbe/0x290 kernel/softirq.c:601
? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)]
__local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423
</IRQ>
<TASK>
rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)]
? irq_thread+0xa7/0x340 kernel/irq/manage.c:0
irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314
? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202
? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220
kthread+0xea/0x110 kernel/kthread.c:376
? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287
? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
To prevent crash, validate rpp_info.seq before using. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix pci_slot_trylock() error handling
Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f8b, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f8b the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com] |
