| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of Resources Without Limits or Throttling in ueberauth guardian allows denial of service via unbounded atom creation from attacker-controlled binary input.
Guardian.Permissions.AtomEncoding encodes permission scopes by passing arbitrary binaries to String.to_atom/1. When encode/3 in lib/guardian/permissions/atom_encoding.ex is called with a list, each binary entry is handled by the encode_value/3 binary clause, which calls String.to_atom(value) with no allow-list check. The perm_set argument (the application's small, finite set of legitimate permission names) is discarded, so any external string flows straight into atom creation. This encoder is selected with use Guardian.Permissions, encoding: Guardian.Permissions.AtomEncoding and reached through the imported encode/3 entry point.
String.to_atom/1 creates a brand-new atom for every previously unseen binary, atoms are never garbage collected, and the BEAM atom table is fixed at roughly 1,048,576 entries by default. An application that funnels attacker-influenced permission scopes (from a request body, a JWT claim, or other external input) into encode/3 therefore mints one permanent atom per distinct value. A modest stream of varied, unauthenticated input permanently consumes the atom table and crashes the BEAM node with system_limit, taking down every application running on it.
The default encoder is Guardian.Permissions.BitwiseEncoding, which is not affected.
This issue affects guardian: from 2.0.0 before 2.4.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in ueberauth guardian (Guardian.Permissions module) allows a denial of service via BEAM atom-table exhaustion.
This vulnerability is associated with program file lib/guardian/permissions.ex and program routines 'Elixir.Guardian.Permissions':encode_permissions!/1, 'Elixir.Guardian.Permissions':encode_permissions_into_claims!/2, 'Elixir.Guardian.Permissions':do_encode_permissions!/2.
The Guardian.Permissions mixin installs a public encode_permissions!/1 function on every module that does use Guardian.Permissions. For each key of the supplied map, encode_permissions!/1 calls String.to_atom(to_string(k)) before any validation runs. The integer-value clause of do_encode_permissions!/2 then short-circuits straight to encoding without validating the key against the configured permission set, so a key with an integer value is interned as a fresh atom with no exception raised. Atoms are never garbage collected and the BEAM atom table is a fixed-size resource (default roughly 1,048,576 entries), so each unique attacker-chosen key permanently consumes one slot. An attacker who can influence a permission map that reaches encode_permissions!/1 (for example a permissions map read from a request body and passed into token issuance via encode_permissions_into_claims!/2) can mint an unbounded number of atoms and exhaust the atom table, crashing the entire BEAM node and every service running on it. The sibling decode_permissions/1 is not affected because it skips keys absent from the configured permission set.
This issue affects guardian: from 2.0.0 before 2.4.1. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination. |
| Symfony is a PHP framework for web and console applications and a set of reusable PHP components. From 6.1.0 until 6.4.41, 7.4.13, and 8.0.13, UrlAttributeSanitizer::getSupportedAttributes() omitted URL-bearing attributes on <object>, <applet>, <iframe>, and <img>, and <meta http-equiv="refresh"> URLs inside content bypassed URL sanitization, allowing explicitly enabled elements or attributes to pass javascript: and similar payloads into sanitized output. This issue is fixed in versions 6.4.41, 7.4.13, and 8.0.13. |
| Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed. |
| Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field. Scope is changed. |
| Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a high-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed. |
| Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a high-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field. Scope is changed. |
| A vulnerability was detected in Grit42 Grit up to 0.11.0. Affected by this issue is some unknown functionality of the file modules/core/backend/app/controllers/concerns/grit/core/grit_entity_controller.rb of the component GritEntityController. Performing a manipulation results in sql injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor).
The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing.
This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18. |
| The Easy Property Listings plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'facebook' User Contact Method in all versions up to, and including, 3.5.24 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The GenerateBlocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Dynamic Tag Injection in HTML Attributes in all versions up to, and including, 2.3.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. A Contributor-level attacker can store the malicious payload by placing a dynamic tag such as {{post_meta key:...}} in a non-URL HTML attribute (e.g., title, aria-label, alt, or data-* attributes) of a GenerateBlocks element block, then setting the corresponding unprotected post meta key via the Custom Fields metabox to a value containing a closing quote and an injected event-handler attribute. |
| The Powerkit – Supercharge your WordPress Site plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'nav' Shortcode Attribute in all versions up to, and including, 3.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Kadence Blocks — Page Builder Toolkit for Gutenberg Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Identity Block Inner Image Content in all versions up to, and including, 3.7.8.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is only triggerable when the block's urlTransparent attribute is set to a non-empty value, as this is a required precondition for the vulnerable code path in build_html() to be reached. |
| better-auth versions after v0.0.2 and before 1.1.16 contain a reflected cross-site scripting (XSS) vulnerability on the /api/auth/error page, where the value of the 'error' URL parameter is reflected as HTML without proper neutralization. An attacker who coerces a user into visiting a specially-crafted URL can execute arbitrary JavaScript in the context of the user's browser. The issue is fixed in version 1.1.16. |
| FreeRDP before 3.30.0 (<= 3.29.0) contains a heap-based buffer overflow in the Windows clipboard client's CliprdrStream_Read function (client/Windows/wf_cliprdr.c). When an OLE paste consumer (e.g. explorer.exe) calls IStream::Read with a fixed-size buffer of cb bytes, CliprdrStream_Read requests file contents from the RDP server and then copies the response into the caller's buffer using the server-supplied length (req_fsize) instead of cb. A malicious or compromised RDP server can return an oversized CB_FILECONTENTS_RESPONSE, causing an out-of-bounds write of attacker-controlled data into the paste consumer's heap buffer when a user pastes server-offered clipboard file contents. |
| A vulnerability was determined in Wavlink WL-NU516U1 708c073-mt7628. Affected is the function set_sys_adm of the file adm.cgi of the component Admin Password Handler. This manipulation causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A flaw has been found in GL.iNet GL-MT3000 up to 4.4.5. The impacted element is the function logread.set_config of the file /usr/lib/oui-httpd/rpc/logread of the component Logread Lua RPC Plugin. This manipulation of the argument record_size causes command injection. The exploit has been published and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| ELECOM wireless LAN routers and access points devices contain an OS Command Injection vulnerability in WebUI. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who can log in to the product. |
| Versions of the package @eslint/plugin-kit before 0.2.3 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by exploiting this vulnerability. |
