| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix backlog accounting in qdisc_dequeue_internal
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Do not map lowcore with identity mapping
Since the identity mapping is pinned to address zero the lowcore is always
also mapped to address zero, this happens regardless of the relocate_lowcore
command line option. If the option is specified the lowcore is mapped
twice, instead of only once.
This means that NULL pointer accesses will succeed instead of causing an
exception (low address protection still applies, but covers only parts).
To fix this never map the first two pages of physical memory with the
identity mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: commit partial buffers on retry
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject duplicate device on updates
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable migration in nf_hook_run_bpf().
syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.
Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]
Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().
[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
__cant_migrate kernel/sched/core.c:8860 [inline]
__cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
__bpf_prog_run include/linux/filter.h:703 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
nf_hook+0x370/0x680 include/linux/netfilter.h:272
NF_HOOK_COND include/linux/netfilter.h:305 [inline]
ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:459 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
__tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
__tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
tcp_push+0x225/0x700 net/ipv4/tcp.c:759
tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x6c7/0x1150 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: clear initialized flag for deinit-ed srng lists
In a number of cases we see kernel panics on resume due
to ath11k kernel page fault, which happens under the
following circumstances:
1) First ath11k_hal_dump_srng_stats() call
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 22511ms before
ath11k_pci 0000:01:00.0: group_id 1 14440788ms before
[..]
ath11k_pci 0000:01:00.0: failed to receive control response completion, polling..
ath11k_pci 0000:01:00.0: Service connect timeout
ath11k_pci 0000:01:00.0: failed to connect to HTT: -110
ath11k_pci 0000:01:00.0: failed to start core: -110
ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM
ath11k_pci 0000:01:00.0: already resetting count 2
ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110
ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110
ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery
[..]
2) At this point reconfiguration fails (we have 2 resets) and
ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit()
which destroys srng lists. However, it does not reset per-list
->initialized flag.
3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized
flag and attempts to dump srng stats:
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 66785ms before
ath11k_pci 0000:01:00.0: group_id 1 14485062ms before
ath11k_pci 0000:01:00.0: group_id 2 14485062ms before
ath11k_pci 0000:01:00.0: group_id 3 14485062ms before
ath11k_pci 0000:01:00.0: group_id 4 14780845ms before
ath11k_pci 0000:01:00.0: group_id 5 14780845ms before
ath11k_pci 0000:01:00.0: group_id 6 14485062ms before
ath11k_pci 0000:01:00.0: group_id 7 66814ms before
ath11k_pci 0000:01:00.0: group_id 8 68997ms before
ath11k_pci 0000:01:00.0: group_id 9 67588ms before
ath11k_pci 0000:01:00.0: group_id 10 69511ms before
BUG: unable to handle page fault for address: ffffa007404eb010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k]
Call Trace:
<TASK>
? __die_body+0xae/0xb0
? page_fault_oops+0x381/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)]
ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)]
worker_thread+0x389/0x930
kthread+0x149/0x170
Clear per-list ->initialized flag in ath11k_hal_srng_deinit(). |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: make fallback action and fallback decision atomic
Syzkaller reported the following splat:
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Modules linked in:
CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline]
RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00
RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45
RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001
RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000
FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432
tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975
tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166
tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925
tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363
ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:469 [inline]
ip_rcv_finish net/ipv4/ip_input.c:447 [inline]
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975
__netif_receive_skb+0x1f/0x120 net/core/dev.c:6088
process_backlog+0x301/0x1360 net/core/dev.c:6440
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453
napi_poll net/core/dev.c:7517 [inline]
net_rx_action+0xb44/0x1010 net/core/dev.c:7644
handle_softirqs+0x1d0/0x770 kernel/softirq.c:579
do_softirq+0x3f/0x90 kernel/softirq.c:480
</IRQ>
<TASK>
__local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407
local_bh_enable include/linux/bottom_half.h:33 [inline]
inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524
mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985
mptcp_check_listen_stop net/mptcp/mib.h:118 [inline]
__mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000
mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066
inet_release+0xed/0x200 net/ipv4/af_inet.c:435
inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x402/0xb70 fs/file_table.c:465
task_work_run+0x150/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xd4
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check pas
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en] |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/irq_sim: Initialize work context pointers properly
Initialize `ops` member's pointers properly by using kzalloc() instead of
kmalloc() when allocating the simulation work context. Otherwise the
pointers contain random content leading to invalid dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: ensure the received length does not exceed allocated size
In xdp_linearize_page, when reading the following buffers from the ring,
we forget to check the received length with the true allocate size. This
can lead to an out-of-bound read. This commit adds that missing check. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix UAF when lookup kallsym after ftrace disabled
The following issue happens with a buggy module:
BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ftrace_mod_get_kallsym+0x1ac/0x590
update_iter_mod+0x239/0x5b0
s_next+0x5b/0xa0
seq_read_iter+0x8c9/0x1070
seq_read+0x249/0x3b0
proc_reg_read+0x1b0/0x280
vfs_read+0x17f/0x920
ksys_read+0xf3/0x1c0
do_syscall_64+0x5f/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3) Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
...
The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.
When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.
When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
Where the "mod" no longer exists and triggers a UAF bug. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
This patch addresses below issues,
1. Active traffic on the leaf node must be stopped before its send queue
is reassigned to the parent. This patch resolves the issue by marking
the node as 'Inner'.
2. During a system reboot, the interface receives TC_HTB_LEAF_DEL
and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues.
In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue
is reassigned to the parent, the current logic still attempts to update
the real number of queues, leadning to below warnings
New queues can't be registered after device unregistration.
WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714
netdev_queue_update_kobjects+0x1e4/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/name
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Fix invalid node index
On a system with DRAM interleave enabled, out-of-bound access is
detected:
megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x46/0x4b
megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas]
megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas]
local_pci_probe+0x42/0x90
pci_device_probe+0xdc/0x290
really_probe+0xdb/0x340
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8b/0xe0
bus_add_driver+0x142/0x220
driver_register+0x72/0xd0
megasas_init+0xdf/0xff0 [megaraid_sas]
do_one_initcall+0x57/0x310
do_init_module+0x90/0x250
init_module_from_file+0x85/0xc0
idempotent_init_module+0x114/0x310
__x64_sys_finit_module+0x65/0xc0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Restore context entry setup order for aliased devices
Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain")
changed the context entry setup during domain attachment from a
set-and-check policy to a clear-and-reset approach. This inadvertently
introduced a regression affecting PCI aliased devices behind PCIe-to-PCI
bridges.
Specifically, keyboard and touchpad stopped working on several Apple
Macbooks with below messages:
kernel: platform pxa2xx-spi.3: Adding to iommu group 20
kernel: input: Apple SPI Keyboard as
/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
Fix this by restoring the previous context setup order. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: remove tag set when second admin queue config fails
Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure
concatenation") modified nvme_tcp_setup_ctrl() to call
nvme_tcp_configure_admin_queue() twice. The first call prepares for
DH-CHAP negotitation, and the second call is required for secure
concatenation. However, this change triggered BUG KASAN slab-use-after-
free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by
repeating the blktests test case nvme/063 a few times [1].
When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain
below:
nvme_tcp_create_ctrl()
nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set
nvme_tcp_setup_ctrl() new=true
nvme_tcp_configure_admin_queue() new=true ... Succeed
nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set
nvme_stop_keep_alive()
nvme_tcp_teardown_admin_queue() remove=false
nvme_tcp_configure_admin_queue() new=false
nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set()
nvme_uninit_ctrl()
nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set
The first call of nvme_tcp_configure_admin_queue() succeeds with
new=true argument. The second call fails with new=false argument. This
second call does not call nvme_remove_admin_tag_set() on failure, due to
the new=false argument. Then the admin tag set is not removed. However,
nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call
nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which
has admin_tag_set field. Later on, the timeout handler accesses the
admin_tag_set field and causes the BUG KASAN slab-use-after-free.
To not leave the admin tag set, call nvme_remove_admin_tag_set() when
the second nvme_tcp_configure_admin_queue() call fails. Do not return
from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin"
go-to label to call nvme_tcp_teardown_admin_queue() which calls
nvme_remove_admin_tag_set(). |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell_rbu: Fix list usage
Pass the correct list head to list_for_each_entry*() when looping through
the packet list.
Without this patch, reading the packet data via sysfs will show the data
incorrectly (because it starts at the wrong packet), and clearing the
packet list will result in a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: reject invalid perturb period
Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.
We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.
tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0 |
