Export limit exceeded: 425871 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29318 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-41388 | 2026-04-15 | 7.8 High | ||
| Fuji Electric Smart Editor is vulnerable to a stack-based buffer overflow, which may allow an attacker to execute arbitrary code. | ||||
| CVE-2025-14505 | 1 Elliptic Project | 1 Elliptic | 2026-04-15 | 5.6 Medium |
| The ECDSA implementation of the Elliptic package generates incorrect signatures if an interim value of 'k' (as computed based on step 3.2 of RFC 6979 https://datatracker.ietf.org/doc/html/rfc6979 ) has leading zeros and is susceptible to cryptanalysis, which can lead to secret key exposure. This happens, because the byte-length of 'k' is incorrectly computed, resulting in its getting truncated during the computation. Legitimate transactions or communications will be broken as a result. Furthermore, due to the nature of the fault, attackers could–under certain conditions–derive the secret key, if they could get their hands on both a faulty signature generated by a vulnerable version of Elliptic and a correct signature for the same inputs. This issue affects all known versions of Elliptic (at the time of writing, versions less than or equal to 6.6.1). | ||||
| CVE-2025-58776 | 1 Keyence | 1 Kv Studio | 2026-04-15 | 7.8 High |
| KV Studio versions 12.23 and prior contain a stack-based buffer overflow vulnerability. If the product uses a specially crafted file, arbitrary code may be executed on the affected product. | ||||
| CVE-2025-13878 | 1 Isc | 1 Bind | 2026-04-15 | 7.5 High |
| Malformed BRID/HHIT records can cause `named` to terminate unexpectedly. This issue affects BIND 9 versions 9.18.40 through 9.18.43, 9.20.13 through 9.20.17, 9.21.12 through 9.21.16, 9.18.40-S1 through 9.18.43-S1, and 9.20.13-S1 through 9.20.17-S1. | ||||
| CVE-2025-3791 | 2026-04-15 | 5.3 Medium | ||
| A vulnerability classified as critical was found in symisc UnQLite up to 957c377cb691a4f617db9aba5cc46d90425071e2. This vulnerability affects the function jx9MemObjStore of the file /data/src/benchmarks/unqlite/unqlite.c. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. | ||||
| CVE-2025-55131 | 1 Nodejs | 1 Nodejs | 2026-04-15 | 7.1 High |
| A flaw in Node.js's buffer allocation logic can expose uninitialized memory when allocations are interrupted, when using the `vm` module with the timeout option. Under specific timing conditions, buffers allocated with `Buffer.alloc` and other `TypedArray` instances like `Uint8Array` may contain leftover data from previous operations, allowing in-process secrets like tokens or passwords to leak or causing data corruption. While exploitation typically requires precise timing or in-process code execution, it can become remotely exploitable when untrusted input influences workload and timeouts, leading to potential confidentiality and integrity impact. | ||||
| CVE-2012-10057 | 2026-04-15 | N/A | ||
| Lattice Semiconductor ispVM System v18.0.2 contains a buffer overflow vulnerability in its handling of .xcf project files. When parsing the version attribute of the ispXCF XML tag, the application fails to properly validate input length, allowing a specially crafted file to overwrite memory on the stack. This can result in arbitrary code execution under the context of the user who opens the file. The vulnerability is triggered locally by opening a malicious .xcf file and does not require elevated privileges. | ||||
| CVE-2025-6751 | 1 Linksys | 1 E8450 | 2026-04-15 | 8.8 High |
| A vulnerability, which was classified as critical, was found in Linksys E8450 up to 1.2.00.360516. This affects the function set_device_language of the file portal.cgi of the component HTTP POST Request Handler. The manipulation of the argument dut_language leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-6490 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833 and classified as problematic. This issue affects the function hashmap_set_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier of the patch is ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. | ||||
| CVE-2025-29950 | 1 Amd | 19 Epyc 7001 Series Processors, Epyc 7002 Series Processors, Epyc 7003 Series Processors and 16 more | 2026-04-15 | N/A |
| Improper input validation in system management mode (SMM) could allow a privileged attacker to overwrite stack memory leading to arbitrary code execution. | ||||
| CVE-2025-34124 | 2026-04-15 | N/A | ||
| A buffer overflow vulnerability exists in Heroes of Might and Magic III Complete 4.0.0.0, HD Mod 3.808 build 9, and Demo 1.0.0.0 via malicious .h3m map files that exploit object sprite name parsing logic. The vulnerability occurs during in-game map loading when a crafted object name causes a buffer overflow, potentially allowing arbitrary code execution. Exploitation requires the victim to open a malicious map file within the game. | ||||
| CVE-2025-24328 | 2026-04-15 | 4.2 Medium | ||
| Sending a crafted SOAP "set" operation message within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause Nokia Single RAN baseband OAM service component restart with software versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later. The OAM service component restarts automatically after the stack overflow without causing a base station restart or network service degradation, and without leaving any permanent impact on the Nokia Single RAN baseband OAM service. | ||||
| CVE-2024-47864 | 2026-04-15 | N/A | ||
| home 5G HR02, Wi-Fi STATION SH-52B, and Wi-Fi STATION SH-54C contain a buffer overflow vulnerability in the hidden debug function. A remote unauthenticated attacker may get the web console of the product down. | ||||
| CVE-2025-46419 | 1 Westermo | 1 Weos | 2026-04-15 | 5.9 Medium |
| Westermo WeOS 5 through 5.23.0 allows a reboot via a malformed ESP packet. | ||||
| CVE-2011-10015 | 2026-04-15 | N/A | ||
| Cytel Studio version 9.0 and earlier is vulnerable to a stack-based buffer overflow triggered by parsing a malformed .CY3 file. The vulnerability occurs when the application copies user-controlled strings into a fixed-size stack buffer (256 bytes) without proper bounds checking. Exploitation allows arbitrary code execution when the crafted file is opened. | ||||
| CVE-2019-25353 | 1 Diy Security | 1 Foscam Video Management System | 2026-04-15 | 7.5 High |
| Foscam Video Management System 1.1.4.9 contains a denial of service vulnerability in the username input field that allows attackers to crash the application. Attackers can overwrite the username with a 520-byte buffer of repeated 'A' characters to trigger an application crash during device login. | ||||
| CVE-2025-6494 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833. It has been classified as problematic. This affects the function hashmap_get_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The patch is named ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. | ||||
| CVE-2011-10016 | 2026-04-15 | N/A | ||
| Real Networks Netzip Classic version 7.5.1.86 is vulnerable to a stack-based buffer overflow when parsing a specially crafted ZIP archive. The vulnerability is triggered when the application attempts to process a file name within the archive that exceeds the expected buffer size. Exploitation allows arbitrary code execution under the context of the victim user when the ZIP file is opened. | ||||
| CVE-2025-46333 | 2026-04-15 | N/A | ||
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption. This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. | ||||
| CVE-2024-10238 | 2026-04-15 | 7.2 High | ||
| A security issue in the firmware image verification implementation at Supermicro MBD-X12DPG-OA6. An attacker can upload a specially crafted image that will cause a stack overflow is caused by not checking fld->used_bytes. | ||||