| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a
possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to
IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an
unusually large MTU.
Steps to reproduce:
1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will
be set to that MTU in ip_setup_cork.
2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be
set to device MTU (cork->fragsize) in __ip_append_data, rather than
to IP_MAX_MTU.
3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of
IPv4 header). Device MTU allows it (it's only one byte bigger than
IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that).
4. The UDP length in the built packet is 65536, which overflows the
16-bit length field and triggers the WARN in udp_set_len_short.
Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward
always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward.
The Fixes tag points at the first commit where I could reproduce the
overflow with IPv4 and IP_PMTUDISC_PROBE. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one
Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so
tfd_index == txq->count is already out of range. Change the guard in
btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'.
This issue was reported by Claude Mythos. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Guard page-fault worker with runtime PM check
During VM teardown, the VM's runtime PM reference is dropped
asynchronously, allowing the device to autosuspend while stale page
faults belonging to the now-dead VM are still queued. When the
page-fault worker later tries to ack one of these, it calls into
guc_ct_send_locked() on an already-suspended device, tripping:
Assertion `!xe_pm_runtime_suspended(xe)` failed!
WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe]
A live VM/exec queue always holds a PM reference while it has
outstanding work, so if the device is suspended at ack time, the
owning context is already gone and the fault is stale.
Take a runtime PM reference across the entire pagefault
queue worker to safely deliver acks for torn-down VMs.
v3:
- Move PM ref to the generic xe_pagefault_queue_work using
guard(xe_pm_runtime)(xe) instead of tracking it in the GuC
backend(Matt Brost).
v2:
- Hold PM ref across the entire batch (begin/end) instead of per-ack.
This prevents the device from autosuspending mid-batch, which would
leave write_only acks written but the end flush skipped, and skip
counter++, desyncing the cadence check.(Himal)
- Add a comment explaining stale faults.(Himal)
(cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455)
[Rodrigo: Added xe_device struct for compatibility while cherry-picking] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Avoid divide by zero on virtualized systems
On a virtualized system, the number of nodes does not have a relationship to
the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which
crashes with a divide by zero in:
if (count++ % roots_per_node)
because the underlying topology code on Xen ends up making num_nodes
2 and num_roots 1 and the integer division result is 0.
The issue is seen with Xen, but it could affect other systems.
Set roots_per_node to 1 in this case. Print a firmware bug when this is
performed for non-virtualized systems.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip gfx switch_power_profile during GPU reset
During resume from GPU reset, the gfx idle work may invoke switch_power_profile
before the reset completes. This causes the following assert error because the
register access occurs without first releasing the GPU reset semaphore:
[ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0
[ 1576.768940] Call Trace:
[ 1576.768944] <TASK>
[ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu]
[ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu]
[ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu]
[ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu]
[ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu]
[ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu]
[ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu]
[ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu]
[ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu]
[ 1576.771460] process_one_work+0x23e/0x6f0
[ 1576.771491] worker_thread+0x1c4/0x380
[ 1576.771506] kthread+0x10c/0x150
[ 1576.771512] ? __pfx_worker_thread+0x10/0x10
[ 1576.771518] ? __pfx_kthread+0x10/0x10
[ 1576.771530] ret_from_fork+0x314/0x390
[ 1576.771537] ? __pfx_kthread+0x10/0x10
[ 1576.771546] ret_from_fork_asm+0x1a/0x30
(cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08) |
| In the Linux kernel, the following vulnerability has been resolved:
exec: do_close_on_exec() before taking exec_update_lock
do_close_on_exec() currently happens while holding the exec_update_lock,
which is used in a lot of places that access process state to
synchronize access checks.
I recently added another such use of exec_update_lock, causing a
regression.
do_close_on_exec() can block waiting for a reply from a filesystem.
That means a hung filesystem can block codepaths that use
exec_update_lock; and it also means that a FUSE filesystem which
attempts to inspect the calling process can deadlock.
To avoid such problems, move do_close_on_exec() before the
exec_update_lock is taken, but after the FD table has been copied if
necessary.
I have looked through all the calls between the old and new position of
the do_close_on_exec() call; there seems to be no file descriptor table
access in between. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix skcipher_walk return code handling in aes_s390
The return codes from skcipher_walk_virt() were not properly checked
before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt().
If skcipher_walk_virt() fails, the walk structure may be in an undefined
state, and attempting to process data could lead to incorrect behavior
or accessing uninitialized memory.
Add proper return code checking to ensure correct handling of the walk
initialization and walk advance and eventually return to the caller
with that return code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot for QLAFX00, matching the I/O
accessors used elsewhere on this ring. Other adapters keep the plain
memset() on their DMA-coherent rings. The zero-fill is retained for FX00
because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of
the entry and rely on the unused tail being pre-zeroed. |
| Deserialization of untrusted data vulnerability in Ministry of Justice General Directorate of Information Technology UYAP Document Editor on Windows and Linux and Ministry of Justice General Directorate of Information Technology UYAP Document Editor on MacOS allows Object Injection.
This issue affects UYAP Document Editor: before 5.4.20; UYAP Document Editor: before 5.4.21. |
| Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in Ministry of Justice General Directorate of Information Technology UYAP Document Editor on Windows and Linux and Ministry of Justice General Directorate of Information Technology UYAP Document Editor on iOS allows OS Command Injection.
This issue affects UYAP Document Editor: before 5.4.20; UYAP Document Editor: before 5.4.21. |
| An issue in HTMLy v.3.1.1 allows a remote attacker to escalate privileges via the get_feed function in the admin.php component |
| Frappe ERPNext before 15.111.0 and 16.x before 16.22.0 contains a privilege escalation vulnerability in a record-creation endpoint that takes the record type from the request and inserts the record with permission checks disabled. Any authenticated user, including one holding no operational role, can supply a privileged record type to create privileged accounts and take full control of the site. |
| Frappe ERPNext before 15.112.0 and 16.x before 16.23.0 contains a stored cross-site scripting vulnerability in a public portal form that accepts unauthenticated submissions and stores content later rendered with insufficient neutralisation. Unauthenticated attackers can submit crafted markup that executes in the browser sessions of staff who review the stored record. |
| Frappe ERPNext 16.x before 16.27.0 contains a stored cross-site scripting vulnerability that allows users with edit rights to inject script through a record name rendered without escaping. Attackers can set a malicious record name so the script runs in the browser of any colleague who opens the page. |
| Frappe ERPNext before 15.119.1 and 16.x before 16.32.0 contains a server-side template injection vulnerability because user-controlled message fields are not validated before template rendering, allowing expressions to run in an unrestricted context. Authenticated attackers holding a common operational role can inject template expressions to read and write arbitrary database data, delete documents, send outbound requests from the server, and send mail from the site. |
| Frappe ERPNext before 15.106.0 and 16.x before 16.16.0 contains an SQL injection vulnerability in multiple endpoints caused by missing input validation. Authenticated attackers can send specially crafted requests to these endpoints to manipulate database queries and extract sensitive information from the ERPNext database. |
| Frappe ERPNext before 15.110.0 and 16.x before 16.21.0 contains a missing authorization vulnerability in which certain endpoints fail to enforce proper authorization checks. Authenticated users can query these endpoints to read data beyond what their assigned role permits. |
| Frappe ERPNext before 16.14.0 contains a missing authorization vulnerability that allows authenticated users to modify master data beyond their permitted role. Attackers can send requests to certain endpoints lacking proper authorization checks to make unauthorized changes to master data records. |
| Frappe ERPNext before 15.121.0 and 16.x before 16.33.0 contains a missing authorization vulnerability in which certain endpoints fail to enforce proper authorization checks. Authenticated users can call these endpoints directly to read data beyond what their assigned role permits. |
