| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, decoding a strip TIFF using CCITT Group 3 or Modified Huffman compression can pass attacker-expanded runs to BitWriterUtils.WriteBits without first checking the current row width. T4TiffCompression.WritePixelRun can accumulate oversized makeup-code runs, and ModifiedHuffmanTiffCompression.Decompress validates the width only after writing. The unchecked writes can overflow the strip buffer, corrupt heap memory, and terminate the process. This strip-path vulnerability is distinct from the tiled decompressor-width mismatch. This issue is fixed in version 4.1.1. |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: cap hh_flows_limit at change time
hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge
hh_flows_limit lets each new heavy-hitter flow pass the
hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size
kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory
growth.
Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the
hhf_init() default) and report the rejected value via extack. The
deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on
TCA_OPTIONS. Configs relying on hh_limit above the default were relying
on unbounded, unsafe behaviour and are not supported going forward.
hhf_init() also ran hhf_change() before setting the default
hh_flows_limit, so a user-supplied hh_limit at add time was clobbered
back to 2048. Set the default before hhf_change() so the configured
value sticks.
This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp
quantum in change and init paths"), which bounded the quantum of the
same qdisc; the hh_flows_limit bound is the remaining unbounded knob of
that series' scope.
Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace;
tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the
value is echoed by tc qdisc show, unbounding heavy-hitter flow
allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048
instead of 500. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix runt reassembly panic from short inner tot_len
When the start of an inner packet is split across two outer packets
such that fewer than 4 bytes land at the end of the first one,
__input_process_payload() saves those bytes as a runt and skips the
iplen/iphlen validation performed for in-place packets. When the
continuation packet arrives, iptfs_reassem_cont() only requires the
declared inner length to be >= sizeof(ra_runt) (6) before allocating
the reassembly skb with that attacker-controlled length.
However, __iptfs_iphlen() always returns the fixed minimum IP header
size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in
[6, 19] the header-completion copy writes past the declared packet
length, and the subsequent "ipremain -= copylen" underflows to ~4GB,
leaving the payload copy length bounded only by blkoff (up to 64KB).
At runtime the skb_put() tailroom check turns this into
skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable
locally via userns+netns IPTFS SAs and remotely against IPTFS VPN
gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps,
tun/tap delivery).
Align the runt path with the normal path by requiring the declared
inner length to cover at least the IP header size. This also subsumes
the previous >= sizeof(ra_runt) check, since the minimum IP header
is always larger than the runt buffer.
This issue was found by the autokbug dynamic kernel fuzzer at
Tencent Yunding Lab. |
| Memory Allocation with Excessive Size Value (CWE-789) in Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user with connector management privileges could cause the cluster to allocate an uncontrolled amount of memory when connector resources with an excessively large `description` field are created and subsequently accessed, exhausting available heap memory and crashing the affected node. |
| On affected Arista access points with Wireless Intrusion Prevention System (WIPS) active, an unauthenticated attacker within radio frequency (RF) proximity can send a crafted frame to crash the sensor service, disabling WIPS monitoring on the access point, or potentially achieve remote code execution. No wireless association or authentication is required. |
| An operating system (OS) command injection vulnerability in CloudVision CUE backup management may allow an authenticated Super User to submit a crafted backup request and execute arbitrary commands with the privileges of the affected service. |
| A specially crafted HTTP POST request to the web administration interface allows an unauthenticated attacker to execute arbitrary operating system commands with root privileges on the affected device. Disable the web server when not configuring the device. |
| Improper Neutralization of Special Elements used in an OS Command in the integrate-platform-docs composite GitHub Action of Chainguard Academy (edu) from commit 7375a80caabcc31c33ec90f29687ed78c13d16ff before commit fb0efb2537d326ab18c07d620875b8ed2a4b39f3 allows an actor who controls the project_id or storage_bucket inputs to execute arbitrary shell commands on the GitHub Actions runner, because the inputs are interpolated directly into Bash gcloud storage cp commands in several steps via ${{ inputs.* }} expressions. The only in-repository caller passed repository secrets and ran only on trusted triggers, so no untrusted input was known to reach the vulnerable steps. |
| Langflow is a tool for building and deploying AI-powered agents and workflows. Before Langflow 1.10.3, the MCP stdio transport launched whatever command / args a user put in an MCP server configuration, with no allowlist and (before 1.10.3) wrapped in bash -c "exec {command} ...". Any user able to reach the MCP server settings ("Settings → MCP Servers → Add MCP Server", POST/PATCH /api/v2/mcp/servers/{server_name}) or to build a flow with the MCP Tools component could add a "server" whose command is an arbitrary OS command (touch, rm -rf, a reverse shell, ...). The command runs on the Langflow host as the Langflow process user as soon as Langflow tries to connect to the server (listing servers, loading tools, running the flow) — even when the UI then reports that the stdio server failed to start. With the default LANGFLOW_AUTO_LOGIN=true, GET /api/v1/auto_login hands out a token without credentials, so on an exposed instance running the default configuration this is reachable without an account. AUTO_LOGIN is documented as a development-only setting; with it disabled, any authenticated (non-admin) user can exploit it. This issue is fixed in Langflow 1.10.3, langflow-base 0.10.3, and lfx 1.10.3. |
| In AMD Versal™ Adaptive SoC devices, insufficient boundary checks in USB boot mode—when enabled through board modifications—could allow crafted images to trigger a buffer overflow and overwrite an active function pointer, which may result in arbitrary code execution during boot process. This condition could lead to potential impacts on confidentiality, integrity, and availability. |
| A flaw was found in SSSD's NFS idmap plugin. When retrieving cached user or group names, the plugin detects if an entry exceeds the destination buffer size but fails to abort before copying data. A local attacker can trigger this vulnerability by requesting identity lookups that resolve to oversized cached entries, resulting in an out-of-bounds write. This flaw primarily leads to a Denial of Service (DoS) by crashing the identity mapping service, and may also corrupt adjacent process memory. |
| Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.0, any authenticated Langflow user can achieve Remote Code Execution (RCE) on the server by adding an MCP server with the "Stdio" transport. The user-supplied command field is passed directly to bash -c "exec {command}" with zero validation, no allowlisting, and no sandboxing. The command executes immediately when the server list is fetched. Additionally, the env field allows arbitrary environment variable injection (e.g., LD_PRELOAD, PATH override). This vulnerability is fixed in 1.9.0. |
| Insufficient boundary validation in the USB boot mode implementation of AMD Zynq™ UltraScale+ MPSoC and RFSoC devices could allow unbounded Device Firmware Upgrade (DFU) download requests to overflow the DDR receive buffer into FSBL memory, potentially resulting in unauthorized code execution during the boot process. This issue could impact the confidentiality, integrity, or availability of affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_tunnel: initialize `options_len` before referencing options
The following command triggers a kernel panic:
ip link add d0 type dummy; ip link set d0 up
ip route add 10.30.0.0/16 \
encap ip id 300 geneve_opts 4660:66:11223344 dev d0
memcpy: detected buffer overflow: 4 byte write of buffer size 0
kernel BUG at lib/string_helpers.c:1044!
...
ip_tun_parse_opts.part.0.cold+0x10/0x10
ip_tun_build_state+0x116/0x2a0
On kernels built with GCC 15+ and `CONFIG_FORTIFY_SOURCE`, the fortified
`memcpy()` got 0 sized destination with request of 4 bytes length:
static int ip_tun_parse_opts_geneve(...)
{
...
attr = tb[LWTUNNEL_IP_OPT_GENEVE_DATA];
data_len = nla_len(attr); /* == 4 */
struct geneve_opt *opt = ip_tunnel_info_opts(info) + opts_len;
memcpy(opt->opt_data, nla_data(attr), data_len);
/* ^^^^^^^^^^^^^ 0 since options_len is assigned afterwards */
Fixed by initializing the counter before the options are referenced.
Matching what `tunnel_key_opts_set()` already does. |
| Vim is an open source, command line text editor. Prior to 9.2.0846, set_sofo() in src/spellfile.c reuses sl_sal_first[] without resetting values left by set_sal_first(), so a crafted spell file containing an SN_SAL section before an SN_SOFO section causes under-counted mapping lists and attacker-influenced writes beyond a heap allocation. This issue is fixed in version 9.2.0846. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: prevent buffer overflow in page_pool allocation
The per‑processor buffering scheme is supported only if the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8).
This is already checked in mvpp2_probe() during the initial
activation of percpu_pools.
However, mvpp2_change_mtu() may later call
mvpp2_bm_switch_buffers(priv, true) without this check, which can
lead to an out-of-bounds access in the priv->page_pool array in
mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ
entries, and mvpp2_get_nrxqs() may return exactly that value. The
per-CPU scheme then doubles it to nrxqs * 2, exceeding the array
bounds.
Check that the hardware version is MVPP22 or newer and that the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS
before switching to per-CPU mode.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
