Export limit exceeded: 408480 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408480 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408480 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46051 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | ||||
| CVE-2026-46050 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix deadlock with check operation and nowait requests When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-46047 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Fix use-after-free in driver remove() In the remove callback, if a packet arrives after destroy_workqueue() is called, but before sock_release(), the qrtr_ns_data_ready() callback will try to queue the work, causing use-after-free issue. Fix this issue by saving the default 'sk_data_ready' callback during qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at the start of remove(). This ensures that even if a packet arrives after destroy_workqueue(), the work struct will not be dereferenced. Note that it is also required to ensure that the RX threads are completed before destroying the workqueue, because the threads could be using the qrtr_ns_data_ready() callback. | ||||
| CVE-2026-46046 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all() The commit c8e008b60492 ("ext4: ignore xattrs past end") introduced a refcount leak in when block_csum is false. ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to get iloc.bh, but never releases it with brelse(). | ||||
| CVE-2026-46044 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. | ||||
| CVE-2026-46040 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(), the error path calls inotify_remove_from_idr() but does not call dec_inotify_watches() to undo the preceding inc_inotify_watches(). This leaks a watch count, and repeated failures can exhaust the max_user_watches limit with -ENOSPC even when no watches are active. Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace limits"), the watch count was incremented after fsnotify_add_mark_locked() succeeded, so this path was not affected. The conversion moved inc_inotify_watches() before the mark insertion without adding the corresponding rollback. Add the missing dec_inotify_watches() call in the error path. | ||||
| CVE-2026-46038 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Free the node during ctrl_cmd_bye() A node sends the BYE packet when it is about to go down. So the nameserver should advertise the removal of the node to all remote and local observers and free the node finally. But currently, the nameserver doesn't free the node memory even after processing the BYE packet. This causes the node memory to leak. Hence, remove the node from Xarray list and free the node memory during both success and failure case of ctrl_cmd_bye(). | ||||
| CVE-2026-46037 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: validate reply type before using icmp_pointers Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type. That value is outside the range covered by icmp_pointers[], which only describes the traditional ICMP types up to NR_ICMP_TYPES. Avoid consulting icmp_pointers[] for reply types outside that range, and use array_index_nospec() for the remaining in-range lookup. Normal ICMP replies keep their existing behavior unchanged. | ||||
| CVE-2026-46033 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize. | ||||
| CVE-2026-46026 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum number of lookups Current code does no bound checking on the number of lookups a client can perform. Though the code restricts the lookups to local clients, there is still a possibility of a malicious local client sending a flood of NEW_LOOKUP messages over the same socket. Fix this issue by limiting the maximum number of lookups to 64 globally. Since the nameserver allows only atmost one local observer, this global lookup count will ensure that the lookups stay within the limit. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased. | ||||
| CVE-2026-46023 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm mirror: fix integer overflow in create_dirty_log() The argument count calculation in create_dirty_log() performs `*args_used = 2 + param_count` before validating against argc. When a user provides a param_count close to UINT_MAX via the device mapper table string, this unsigned addition wraps around to a small value, causing the subsequent `argc < *args_used` check to be bypassed. The overflowed param_count is then passed as argc to dm_dirty_log_create(), where it can cause out-of-bounds reads on the argv array. Fix by comparing param_count against argc - 2 before performing the addition, following the same pattern used by parse_features() in the same file. Since argc >= 2 is already guaranteed, the subtraction is safe. | ||||
| CVE-2026-46022 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient. | ||||
| CVE-2026-46021 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration. | ||||
| CVE-2026-46018 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES parse_uac2_sample_rate_range() caps the number of enumerated rates at MAX_NR_RATES, but it only breaks out of the current rate loop. A malformed UAC2 RANGE response with additional triplets continues parsing the remaining triplets and repeatedly prints "invalid uac2 rates" while probe still holds register_mutex. Stop the whole parse once the cap is reached and return the number of rates collected so far. | ||||
| CVE-2026-46015 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: call sk_data_ready() after listener migration When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely. Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop(). However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path. The reqsk_timer_handler() path does not need the same changes for two reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly. | ||||
| CVE-2026-46003 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the total number of nodes Currently, the nameserver doesn't limit the number of nodes it handles. This can be an attack vector if a malicious client starts registering random nodes, leading to memory exhaustion. Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased. | ||||
| CVE-2026-45997 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails If device_add(&sdkp->disk_dev) fails, put_device() runs scsi_disk_release(), which frees the scsi_disk but leaves the gendisk referenced. The device_add_disk() error path in sd_probe() calls put_disk(gd); call put_disk(gd) here to mirror that cleanup. | ||||
| CVE-2026-45850 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem. | ||||
| CVE-2026-45844 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target IP address. This causes arptables rules to match against garbage data, leading to incorrect filtering decisions: packets that should be accepted may be dropped and vice versa. The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already handles this correctly by skipping the target hardware address for ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()." Mangle the original patch to always return 0 (no match) in case user matches on the target hardware address which is never present in IEEE1394. Note that this returns 0 (no match) for either normal and inverse match because matching in the target hardware address in ARPHRD_IEEE1394 has never been supported by arptables. This is intentional, matching on the target hardware address should never evaluate true for ARPHRD_IEEE1394. Moreover, adjust arpt_mangle to drop the packet too as AI suggests: In arpt_mangle, the logic assumes a standard ARP layout. Because IEEE1394 (FireWire) omits the target hardware address, the linear pointer arithmetic miscalculates the offset for the target IP address. This causes mangling operations to write to the wrong location, leading to packet corruption. To ensure safety, this patch drops packets (NF_DROP) when mangling is requested for these fields on IEEE1394 devices, as the current implementation cannot correctly map the FireWire ARP payload. This omits both mangling target hardware and IP address. Even if IP address mangling should be possible in IEEE1394, this would require to adjust arpt_mangle offset calculation, which has never been supported. Based on patch from Weiming Shi <bestswngs@gmail.com>. | ||||
| CVE-2026-45843 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packets. Make decode() and pull16() take the packet end pointer and return -1 when exhausted. Add a bounds check before the TCP-checksum read. The existing == -1 tests now do what they were always meant to. | ||||