| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| i2p before 2.3.0 (Java) allows de-anonymizing the public IPv4 and IPv6 addresses of i2p hidden services (aka eepsites) via a correlation attack across the IPv4 and IPv6 addresses that occurs when a tunneled, replayed message has a behavior discrepancy (it may be dropped, or may result in a Wrong Destination response). An attack would take days to complete. |
| Git Credential Manager (GCM) is a secure Git credential helper built on .NET that runs on Windows, macOS, and Linux. The Git credential protocol is text-based over standard input/output, and consists of a series of lines of key-value pairs in the format `key=value`. Git's documentation restricts the use of the NUL (`\0`) character and newlines to form part of the keys or values. When Git reads from standard input, it considers both LF and CRLF as newline characters for the credential protocol by virtue of calling `strbuf_getline` that calls to `strbuf_getdelim_strip_crlf`. Git also validates that a newline is not present in the value by checking for the presence of the line-feed character (LF, `\n`), and errors if this is the case. This captures both LF and CRLF-type newlines. Git Credential Manager uses the .NET standard library `StreamReader` class to read the standard input stream line-by-line and parse the `key=value` credential protocol format. The implementation of the `ReadLineAsync` method considers LF, CRLF, and CR as valid line endings. This is means that .NET considers a single CR as a valid newline character, whereas Git does not. This mismatch of newline treatment between Git and GCM means that an attacker can craft a malicious remote URL. When a user clones or otherwise interacts with a malicious repository that requires authentication, the attacker can capture credentials for another Git remote. The attack is also heightened when cloning from repositories with submodules when using the `--recursive` clone option as the user is not able to inspect the submodule remote URLs beforehand. This issue has been patched in version 2.6.1 and all users are advised to upgrade. Users unable to upgrade should only interact with trusted remote repositories, and not clone with `--recursive` to allow inspection of any submodule URLs before cloning those submodules. |
| A publish-access account was compromised for `@solana/web3.js`, a JavaScript library that is commonly used by Solana dapps. This allowed an attacker to publish unauthorized and malicious packages that were modified, allowing them to steal private key material and drain funds from dapps, like bots, that handle private keys directly. This issue should not affect non-custodial wallets, as they generally do not expose private keys during transactions. This is not an issue with the Solana protocol itself, but with a specific JavaScript client library and only appears to affect projects that directly handle private keys and that updated within the window of 3:20pm UTC and 8:25pm UTC on Tuesday, December 3, 2024. These two unauthorized versions (1.95.6 and 1.95.7) were caught within hours and have since been unpublished. All Solana app developers should upgrade to version 1.95.8. Developers that suspect they might be compromised should rotate any suspect authority keys, including multisigs, program authorities, server keypairs, and so on. |
| Conduit is a chat server powered by Matrix. A vulnerability that affects a number of Conduit-derived homeservers allows a remote, unauthenticated attacker to force the target server to cryptographically sign arbitrary membership events. Affected products include Conduit prior to version 0.10.10, continuwuity prior to version 0.5.0, Grapevine prior to commit `9a50c244`, and tuwunel prior to version 1.4.8. The flaw exists because the server fails to validate the origin of a signing request, provided the event's state_key is a valid user ID belonging to the target server. Attackers can forge "leave" events for any user on the target server. This forcibly removes users (including admins and bots) from rooms. This allows denial of service and/or the removal of technical protections for a room (including policy servers, if all users on the policy server are removed). Attackers can forge "invite" events from a victim user to themselves, provided they have an account on a server where there is an account that has the power level to send invites. This allows the attacker to join private or invite-only rooms accessible by the victim, exposing confidential conversation history and room state. Attackers can forge "ban" events from a victim user to any user below the victim user's power level, provided the victim has the power level to issue bans AND the target of the ban resides on the same server as the victim. This allows the attacker to ban anyone in a room who is on the same server as the vulnerable one, however cannot exploit this to ban users on other servers or the victim themself. Conduit fixes the issue in version 0.10.10. continuwuity fixes the issue in commits `7fa4fa98` and `b2bead67`, released in 0.5.0. tuwunel fixes the issue in commit `dc9314de1f8a6e040c5aa331fe52efbe62e6a2c3`, released in 1.4.8. Grapevine fixes the issue in commit `9a50c2448abba6e2b7d79c64243bb438b351616c`. As a workaround, block access to the `PUT /_matrix/federation/v2/invite/{roomId}/{eventId}` endpoint using your reverse proxy. |
| A filename spoofing vulnerability exists in WinRAR when opening specially crafted ZIP archives. The issue arises due to inconsistencies between the Central Directory and Local File Header entries in ZIP files. When viewed in WinRAR, the file name from the Central Directory is displayed to the user, while the file from the Local File Header is extracted and executed. An attacker can leverage this flaw to spoof filenames and trick users into executing malicious payloads under the guise of harmless files, potentially leading to remote code execution. |
| A vulnerability has been identified in RUGGEDCOM RMC8388 V5.X (All versions < V5.10.1), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.1), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.1), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.1), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.1), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.1), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.1), RUGGEDCOM RSG907R (All versions < V5.10.1), RUGGEDCOM RSG908C (All versions < V5.10.1), RUGGEDCOM RSG909R (All versions < V5.10.1), RUGGEDCOM RSG910C (All versions < V5.10.1), RUGGEDCOM RSG920P V5.X (All versions < V5.10.1), RUGGEDCOM RSL910 (All versions < V5.10.1), RUGGEDCOM RST2228 (All versions < V5.10.1), RUGGEDCOM RST2228P (All versions < V5.10.1), RUGGEDCOM RST916C (All versions < V5.10.1), RUGGEDCOM RST916P (All versions < V5.10.1). Affected devices do not properly validate input during the TLS certificate upload process of the web service. This could allow an authenticated remote attacker to trigger a device crash and reboot, leading to a temporary Denial of Service on the device. |
| The Intellian C700 web panel allows you to add firewall rules. Each of these rules has an associated ID, but there is a problem when adding a new rule, the ID used to create the database entry may be different from the JSON ID. If the rule needs to be deleted later, the system will use the JSON ID and therefore fail. This can be exploited by an attacker to create rules that cannot be deleted unless the device is reset to factory defaults. |
| An issue was discovered on Mitel ICP VoIP 3100 devices. When a remote user attempts to log in via TELNET during the login wait time and an external call comes in, the system incorrectly divulges information about the call and any SMDR records generated by the system. The information provided includes the service type, extension number and other parameters, related to the call activity. |
| Timing difference in password reset in Ergon Informatik AG's Airlock IAM 7.7.9, 8.0.8, 8.1.7, 8.2.4 and 8.3.1 allows unauthenticated attackers to enumerate usernames. |
| The Animation Addons for Elementor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.1.6 via the 'render' function in widgets/content-slider.php and widgets/tabs.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft Elementor template data. |
| Helix ALM prior to 2025.1 returns distinct error responses during authentication, allowing an attacker to determine whether a username exists. |
| A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.21.0), Mendix Runtime V10.12 (All versions < V10.12.16), Mendix Runtime V10.18 (All versions < V10.18.5), Mendix Runtime V10.6 (All versions < V10.6.22), Mendix Runtime V8 (All versions < V8.18.35), Mendix Runtime V9 (All versions < V9.24.34). Affected applications allow for entity enumeration due to distinguishable responses in certain client actions. This could allow an unauthenticated remote attacker to list all valid entities and attribute names of a Mendix Runtime-based application. |
| In OpenStack Ironic before 26.0.1 and ironic-python-agent before 9.13.1, there is a vulnerability in image processing, in which a crafted image could be used by an authenticated user to exploit undesired behaviors in qemu-img, including possible unauthorized access to potentially sensitive data. The affected/fixed version details are: Ironic: <21.4.3, >=22.0.0 <23.0.2, >=23.1.0 <24.1.2, >=25.0.0 <26.0.1; Ironic-python-agent: <9.4.2, >=9.5.0 <9.7.1, >=9.8.0 <9.11.1, >=9.12.0 <9.13.1. |
| Insertion of Sensitive Information Into Sent Data vulnerability in Ays Pro AI ChatBot with ChatGPT and Content Generator by AYS ays-chatgpt-assistant allows Retrieve Embedded Sensitive Data.This issue affects AI ChatBot with ChatGPT and Content Generator by AYS: from n/a through <= 2.6.6. |
| Mintty is a terminal emulator for Cygwin, MSYS, and WSL. In versions 2.3.6 through 3.7.4, several escape sequences can cause the mintty process to access a file in a specific path. It is triggered by simply printing them out on bash. An attacker can specify an arbitrary network path, negotiate an ntlm hash out of the victim's machine to an attacker controlled remote host. An attacker can use password cracking tools or NetNTLMv2 hashes to Pass the Hash. Version 3.7.5 fixes the issue. |
| Nuxt is an open-source web development framework for Vue.js. Starting in version 3.8.1 and prior to version 3.15.3, Nuxt allows any websites to send any requests to the development server and read the response due to default CORS settings. Users with the default server.cors option using Vite builder may get the source code stolen by malicious websites. Version 3.15.3 fixes the vulnerability. |
| Netis E1+ 1.2.32533 contains an information disclosure vulnerability that allows unauthenticated attackers to retrieve WiFi passwords through the netcore_get.cgi endpoint. Attackers can send a GET request to the endpoint to extract sensitive network credentials including SSID and WiFi passwords in plain text. |
| A security flaw has been discovered in FNKvision Y215 CCTV Camera 10.194.120.40. This affects an unknown part of the file /tmp/wpa_supplicant.conf. Performing manipulation results in information disclosure. The attack may be carried out on the physical device. The attack's complexity is rated as high. It is indicated that the exploitability is difficult. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| Value provided in one of POST parameters sent during the process of logging in to Times Software E-Payroll is not sanitized properly, which allows an unauthenticated attacker to perform DoS attacks. SQL injection attacks might also be feasible, although so far creating a working exploit has been prevented probably by backend filtering mechanisms.
Additionally, command injection attempts cause the application to return extensive error messages disclosing some information about the internal infrastructure.
Patching status is unknown because the vendor has not replied to messages sent by the CNA. |
| Generation of Error Message Containing Sensitive Information vulnerability in Hillstone Networks Hillstone Next Generation FireWall.This issue affects Hillstone Next Generation FireWall: from 5.5R8P1 before 5.5R8P23. |
