| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix division by zero in initialize_timer()
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: validate skb length in testmode query
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
Use axi_dmac_free_desc() to free fully the descriptor at fail path when
call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
kvm_s390_get_cmma_bits() allocates its output buffer with vmalloc(),
which does not zero the returned pages:
values = vmalloc(args->count);
In the non-peek (migration) path, dat_get_cmma() reports a byte count
spanning from the first to the last dirty page, but __dat_get_cmma_pte()
writes values[gfn - start] only for pages whose CMMA dirty bit is set.
The walk uses DAT_WALK_IGN_HOLES, so clean and unmapped pages that lie
between two dirty pages within the reported span are visited but never
store their byte. Those gaps (up to KVM_S390_MAX_BIT_DISTANCE pages
each) stay uninitialized yet fall inside [0, count) and are copied out
by copy_to_user(), disclosing stale kernel memory to user space.
Before the switch to the new gmap implementation the buffer was fully
populated for every gfn in the span, so no uninitialized bytes were
exposed; the dirty-only walk introduced the leak.
Use vzalloc() so the gaps read back as zero. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES
When using scratch_scale, the scratch sizes are rounded up to
CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This
is not done when using fixed scratch sizes via command line. This can
result in user specifying a size which is not aligned, and thus kernel
releasing a pageblock that is only partially scratch.
Do the rounding up for both cases in scratch_size_update(). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix type confusion in CDC union descriptor parsing
The driver currently trusts the bMasterInterface0 from the CDC union
descriptor without verifying that it matches the interface being
probed. This could lead to the driver overwriting the private data of
another interface.
Validate that the control interface found in the descriptor is indeed
the one we are probing. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A weakness has been identified in Edimax EW-7478APC 1.04. This affects the function formWanTcpipSetup of the file /goform/formWanTcpipSetup. This manipulation of the argument pppUserName causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in DefaultFuction Customer-Relationship-Management-In-C-Project 2.0. Impacted is the function gets of the component Customer Search Module. This manipulation causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project confirms, that "it’s being processed". |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: or vbscript: URIs whose scheme is split by semicolon-less numeric character references such as :, 	, 
, or 
. CGI.unescapeHTML leaves these references encoded, so allowed_uri? reports the URL safe even though a browser decodes an encoded colon or strips encoded whitespace and executes the resulting URI scheme. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| Stack-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Catalyst SD-WAN engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20313 are related to Improper link resolution before file access issues that are grouped under the Common Weakness Enumeration (CWE) CWE-1284. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20268 are related to issues with improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20156 are related to improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119. |
| Repository Visibility Manipulation via Git Push Options |
| Emlog is an open source website building system. In 2.6.26 and earlier, missing CSRF protection on the AI Assistant execute_tool action in admin/ai.php lets a remote unauthenticated attacker submit a forged cross-site request from an attacker-controlled page to a recently logged-in administrator. The authentication cookie set in include/lib/loginauth.php has no explicit SameSite attribute, enabling Chrome's temporary Lax+POST grace window. The query_database case passes attacker-controlled sql and confirm_code values to Ai::queryDatabase in include/service/ai.php; read queries need no confirmation, write queries accept the public confirm string, only the blog table is write-protected, and aliasing password as pwd_hash bypasses output redaction. A successful request can read every database table and write every table except blog, including changing the user table to take over an administrator account. No fixed version is available as of this review. |
| gdu fails to strip terminal escape sequences from directory and file names when printing paths after TUI exit. Attackers can craft malicious directory or file names containing escape sequences that are interpreted by the terminal, enabling title spoofing, clipboard manipulation, or other terminal-dependent effects. |
| Heap-based buffer overflow in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| Public-Only Personal access tokens scope bypass in Organization and Permission Endpoints |
