| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| llama.cpp MTMD Multimodal GGUF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must open a malicious file.
The specific flaw exists within the parsing of audio multimodal projector GGUF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-30980. |
| Philips Hue Bridge HomeKit Accessory Protocol chacha20_decrypt Integer Underflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the HomeKit Accessory Protocol service, which listens on TCP port 8080 by default. When parsing pairing requests, the process does not properly validate user-supplied data, which can result in an integer underflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28332. |
| An attacker that is able to send a crafted network packet to the affected component may trigger an integer overflow during module size validation. This may cause insufficient bounds checking and result in out-of-bounds memory reads, potentially leading to a denial of service condition due to process termination. |
| Description:
When BIG-IP APM is provisioned and a virtual server is configured with an APM Access profile and a SAML Service Provider (SP) agent with encrypted assertions enabled, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate.
Impact:
Traffic is disrupted while the TMM process restarts. This vulnerability allows a remote, unauthenticated attacker to cause a denial-of-service (DoS) on the BIG-IP system. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Description:
When BIG-IP APM is provisioned, an Access Profile is configured as a SAML SP (Service Provider) and is applied to a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate.
Impact:
Traffic
is disrupted while the TMM process restarts. This vulnerability allows a remote unauthenticated attacker to cause a denial-of-service (DoS) on the BIG-IP system.
There
is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Integer overflow or wraparound in Microsoft Windows Codecs Library allows an unauthorized attacker to execute code over a network. |
| An off-by-one error in AMD Secure Encrypted Virtualization (SEV) firmware could allow an attacker with hypervisor access to corrupt the Reverse Map Table (RMP) table, potentially resulting in loss of guest memory integrity. |
| JSON::XS versions from 4.0_00 before 4.05 for Perl corrupt the incremental buffer length by chopping past its end in incr_skip after a top-level number.
The incremental parser scans any run of digits, signs, dots and exponent markers as one number, but the decoder stops at the end of a valid number, so the parser keeps an offset into bytes it has not decoded. It then empties the buffer without clearing those bytes, and a later incr_parse call without new input reads them again and moves the offset past the end of the buffer. incr_skip, the documented recovery after an error, removes that many bytes and the buffer length wraps.
A peer sending input such as "1-2" to an incr_parse consumer can make the next read of incr_text exit the process through perl's uncatchable out-of-memory path. |
| JSON::XS versions from 3.04 before 4.05 for Perl write one byte past a heap buffer when appending a one-byte chunk in incr_parse.
The incremental buffer grows to one and a half times the length it must hold, with no room reserved for the terminating NUL. For an empty buffer and a one-byte chunk that request is one byte, which a buffer whose front was removed by earlier decodes can already have, so nothing is reallocated and the NUL lands one byte past the allocation.
A peer streaming data to an incr_parse consumer, choosing how the input is split into reads, can cause a one-byte heap out-of-bounds write. |
| @fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 3.2.1 through 3.2.5, the parser can interpret the same multipart bytes differently depending on how they are split across socket reads: when the sequence that terminates a part's header block arrives split exactly at the configured header size limit, an off by one error drops the final header line, so a part declared as a binary file attachment is emitted as an ordinary text field instead of a file. A remote client controls both the multipart body and the header padding needed to reach the boundary and can influence segmentation, so an application that applies upload validation such as malware scanning or extension checks only to file events while trusting plain field values may process the payload through the wrong path. The parser level type confusion is fully reproducible, while the downstream validation bypass depends on the application. The issue is fixed in @fastify/busboy 3.2.6, which tracks how many terminator bytes were actually buffered when the limit is reached so a split terminator no longer corrupts the final header, and users should upgrade to 3.2.6 or later. As a workaround, apply the same validation to field values as to file uploads rather than treating file events as a trust boundary. |
| Microsoft jxrlib through 1.1 and the mircomir jxrlib fork before 1.3.1 contain a heap buffer overflow in ReadBinaryData() in jxrgluelib/JXRMeta.c caused by integer overflow of the metadata count. Attackers can supply a JPEG XR file with a count of 0xFFFFFFFE or 0xFFFFFFFF, wrapping PKAlloc(uCount + 2) to an undersized buffer that the following file read overflows, corrupting heap memory in decoding applications. |
| In
the Matter and Aliro Door Lock Application of the Nordic Semiconductor nRF Door
Lock and Access Control Add-on v1.0.0 through v1.1.1 with
CONFIG_DOOR_LOCK_STEP_UP_PHASE enabled, deleting a Credential Issuer passes the
1-based Matter credential index to ClearValidityIterations(), which expects a
0-based storage index. The intended issuer's ValidityIteration state is left in
place, and the state of the adjacent, still-provisioned issuer is cleared. This
resets that issuer's rollback protection. An attacker holding an older but correctly
signed Access Document from the adjacent issuer, whose validity iteration had
been superseded, can then potentially obtain physical access. Fixed in v1.2.0. |
| Buffer over-read in Microsoft Office allows an unauthorized attacker to disclose information over a network. |
| Uncontrolled resource consumption in Windows DHCP Server allows an unauthorized attacker to deny service over a network. |
| Integer overflow or wraparound in Windows Network Connection Broker allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size. |
| A maliciously crafted DWG file, when parsed by Autodesk AutoCAD, can trigger an Integer Overflow vulnerability in RLE bitmap decompression, resulting in an undersized heap allocation and subsequent heap buffer overflow. A malicious actor can leverage this vulnerability to cause a crash or potentially execute arbitrary code in the context of the current process. |
| ESP-IDF is the Espressif Internet of Things (IoT) Development Framework. Prior to 5.2.8, 5.3.6, 5.5.6, and 6.0.3, the Bluedroid BLE Mesh GATT server read handler bt_mesh_bta_gatts_cb in esp_ble_mesh stores a signed attribute-read callback length in an unsigned 16-bit variable. A negative ATT error code is therefore interpreted as a very large successful length and used for a memory copy from a small stack buffer into the GATT response structure. A remote attacker within Bluetooth LE range who can connect to an exposed PB-GATT provisioning or Mesh Proxy service can trigger a failed attribute read with a crafted request. On devices where the affected attributes are accessible without pairing, exploitation requires neither pairing nor user interaction; access requirements depend on device configuration. The resulting out-of-bounds read and stack-based buffer overflow corrupts the Bluetooth host task stack, causing a crash and device restart and potentially further memory corruption. The issue affects devices built with CONFIG_BT_BLUEDROID_ENABLED=y and BLE Mesh GATT enabled; the NimBLE host path is not affected. This issue is fixed in versions 5.2.8, 5.3.6, 5.5.6, and 6.0.3. |
| Integer overflow or wraparound in Windows DNS allows an unauthorized attacker to disclose information over a network. |