| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. In versions 0.261.003 and 0.261.027, an authorization ordering flaw in POST /api/user/plugins allows an authenticated low-privileged user to omit the top-level MCP type so that _reject_non_admin_mcp_stdio skips inspection before the type is restored from metadata. The stored personal action can then reach McpPluginFactory.create_connector, and MCPStdioPlugin.connect starts the attacker-selected operating-system process under the application service identity when the action tool is invoked. Exploitation requires personal plugins to be enabled and governance to permit MCP actions, and it can expose or modify secrets and data available to the service or disrupt the service. This issue is fixed in version 0.261.031. |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. Prior to 0.261.029, POST /api/group_documents/upload stores an attacker-controlled group document filename that group_workspaces.html later interpolates into inline Share event handlers. The escapeGroupHtml function leaves apostrophes unchanged, while escapeHtml produces an HTML entity that the browser decodes before JavaScript evaluation, so either path permits the filename to terminate the handler string. An authenticated group Owner, Admin, or DocumentManager can persist script that executes in the SimpleChat origin when another group member clicks Share, allowing access to victim-visible data and actions with the victim session. This issue is fixed in version 0.261.029. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: percpu: Fix LSE operations on {8,16}-bit types
The assembly for __percpu_##name##_case_##sz() and
__percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro
argument to form the LSE instruction. Without 'sfx', a W register
argument will imply a 32-bit memory location, and consequently
{8,16}-bit ops will erroneously read and write 32 bits of memory when
the LSE instruction is used.
Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not
necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is
a register-register operation which does not access memory (and does not
take a size suffix). |
| Payload is a free and open source headless content management system. In versions before 3.90.0 and canary versions before 4.0.0-canary.34, a collection that allows downloadable SVG uploads can store a malicious SVG that bypasses sanitization and executes attacker-controlled JavaScript when a user downloads and opens the SVG. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| Payload is a free and open source headless content management system. In versions before 3.90.0 and canary versions before 4.0.0-canary.34, an authenticated user who can update or delete uploads stored locally can cause file cleanup to remove unintended files outside the configured upload directory, resulting in data loss or service disruption. Deployments that restrict upload management to trusted users are less exposed. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release tail references on DELACTION failure
A batched RTM_DELACTION request takes a temporary reference on each
action before attempting any deletion. tcf_action_delete() clears
each processed slot and drops its temporary reference before attempting
the deletion. If deletion fails, tca_action_gd() calls
tcf_action_put_many() to release the remaining references, but its
tcf_act_for_each_action() iterator stops at the first NULL slot.
When a batch stops at an action bound to a filter, this leaks a
reference on each subsequent action. A later delete of an unbound
action can then return success without removing it from the IDR.
Walk the full array in tcf_action_put_many() and skip NULL slots to
release the references held on the unprocessed actions. |
| Quasar Framework is a framework for building high-performance Vue.js user interfaces. Prior to 2.22.0, the SSR-only getHead() serializer in ui/src/plugins/meta/Meta.js used getAttr() to interpolate values supplied through useMeta() into title, meta, link, and script markup without HTML text or quoted-attribute encoding. injectServerMeta() appended that output to the raw server-rendered response. An attacker who can influence dynamic page metadata, such as a post title, product name, excerpt, or display name, can terminate the intended HTML context and inject executable markup before hydration. The client-side apply() path is not affected because it uses DOM APIs that encode attributes. This issue is fixed in version 2.22.0. |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, decoding a strip TIFF using CCITT Group 3 or Modified Huffman compression can pass attacker-expanded runs to BitWriterUtils.WriteBits without first checking the current row width. T4TiffCompression.WritePixelRun can accumulate oversized makeup-code runs, and ModifiedHuffmanTiffCompression.Decompress validates the width only after writing. The unchecked writes can overflow the strip buffer, corrupt heap memory, and terminate the process. This strip-path vulnerability is distinct from the tiled decompressor-width mismatch. This issue is fixed in version 4.1.1. |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1. |
| A flaw was found in pulp-python's PyPI simple index. Project names are written into the HTML index without escaping. A user who can publish a Python package can store markup in the package name. A person who opens that index in a browser runs the markup in the origin that served the page, and the attacker or user can take limited actions as that person on that site during the visit. The flaw does not run commands on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| Improper state validation in DevTools in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().
Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.")
changed Tarjan's algorithm to update lowlink with lowlink,
which is called lowpoint (unix_vertex.scc_index).
unix_vertex_dead() assumes all vertices in an SCC share the same
lowpoint, but this is not always true if an SCC has two or more
back edges, depending on the order of DFS.
For example, the graph below has two back edges from B to A
and from C to B.
A --> B --> C
^ | ^ |
`----' `----'
If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A),
each index and scc_index will be updated as follows.
A --> B --> C C = (3, 3) (index, scc_index)
B = (2, 2)
A = (1, 1)
A ... B ... C C = (3, 2)<-.
^ | B = (2, 2) -'
`----' A = (1, 1)
A ... B ... C C = (3, 2)
^ | . . B = (2, 1)<-.
`----' .... A = (1, 1) -'
Then, unix_vertex_dead() thinks that B is passed to another
SCC with scc_index 2, and the SCC is not garbage-collected.
This does not happen if DFS walks in a different order below
or starts from B.
1 3
A --> B --> C
^ | ^ |
`----' `----'
2 4
Let's unify scc_index across the SCC when finalising it.
Note that updating v->index was previously done in unix_scc_dead(),
when called from __unix_walk_scc(), just to save one loop. Since
__unix_walk_scc() now iterates over the SCC anyway, the update is
moved back to __unix_walk_scc() and 'fast' argument is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: only operate on TDLS peers in the TDLS code
ieee80211_tdls_oper() can operate on the AP station, which then
yields various warnings when the AP station is removed then or
at a later point in time after being confused for a TDLS peer.
Always check that the station is a TDLS peer. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted
The client borrows shared CQ credits in the ADDR_RESOLVED handler via
ib_cq_pool_get(), before the peer is connected. create_cm() can return
-ERESTARTSYS from wait_event_interruptible_timeout() without destroying
the CM ID. The init_conns() and stop-and-destroy paths then call
destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards
rdma_destroy_id().
CMA serializes the handler against rdma_destroy_id() with handler_mutex,
but that does not order the GET against destroy_con_cq_qp(). If
ADDR_RESOLVED has already passed the DESTROYING check, it can take
con_mutex, GET credits, and then lose the con to kfree. Device
unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup().
Set a per-connection flag under con_mutex before CQ/QP teardown so a
racing ADDR_RESOLVED cannot borrow credits after teardown has begun. |
| A flaw has been found in itsourcecode Online Admission System 1.0. This impacts an unknown function of the file /new.php. Executing a manipulation of the argument schedid can lead to sql injection. The attack can be launched remotely. The exploit has been published and may be used. |
