| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate logical CPU id and clos id
Validate max CLOS ID and logical CPU ID for core power feature.
Reject any clos level or logical CPU number greater than the
supported maximum. These are used to calculate MMIO offset. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Bound the EC-reported sensor number
Each EC FIFO event carries an 8-bit sensor number (in->sensor_num).
cros_ec_sensorhub_ring_handler() validates the FIFO event count, the
per-read count and the ring bound, but not the sensor number, which
cros_ec_sensor_ring_process_event() then uses unchecked to index
sensorhub->batch_state[] - allocated with only sensorhub->sensor_num
entries. A sensor number of sensor_num or larger is an out-of-bounds
read and write of batch_state[].
Validate the sensor number in the ring handler, where each event is read
from the EC, and drop a malformed event before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Fail TX enqueue when the QP link is down
Commit f195a1a6fe41 ("ntb: Drop packets when qp link is down") meant to
make ntb_transport_tx_enqueue() drop packets submitted while the QP link
is down, but it only returns 0 without consuming the packet. Zero means
success by this function's contract, so ntb_netdev reports NETDEV_TX_OK
and forgets the skb: nothing queued it, nothing frees it, and it leaks,
one skb for every transmit racing a link-down.
Return -ENOLINK instead, restoring the contract that a non-zero return
leaves the buffer owned by the caller. With the preceding patch,
ntb_netdev frees the skb on non-retryable enqueue failures and returns
NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking
or entering a busy retry loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mts64: Check card index validity at probe
Although mts64 driver has a check of the given devptr->id value, it
doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: bound IBI payload to the requested max_payload_len
svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into
the IBI slot. The loop is bounded by the hardware FIFO size
(SVC_I3C_FIFO_SIZE), not by the slot size.
slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool()
sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only
rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can
request a smaller one. mctp-i3c requests 1. Each readsb() then copies the
controller RXCOUNT bytes (up to 31) with no check against the slot size.
A device that sends more bytes than the slot holds writes past
slot->data, an out-of-bounds write into the IBI pool.
Bound the loop by dev->ibi->max_payload_len and clamp each read to the
space left in the slot, the same way dw-i3c does. A device can still send
more than the requested payload. Flush the leftover bytes from the RX FIFO
so they do not leak into the next transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
The memory allocated for buf is not freed in some of the error paths in
brcmf_sdio_read_control(). Fix that by adding vfree() calls.
[arend: rework as suggested by Johannes] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb()
The skb passed to the rtw_hci_tx_write() is expected to be freed when
the function fails, but the error path in rtw_txq_push_skb() does not
free the skb before returning. This can lead to a memory leak in
rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb(). |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the
interrupt handler to report a status change. If the wait times out, or is
interrupted before the handler runs, the function returns without
balancing the enable_irq() call.
Disable the IRQ before leaving the failed wait path. Also preserve an
interrupted wait's original error code instead of converting it to
-ETIMEDOUT inside the helper. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: drop dma_buf reference on foreign-fd prime import
ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's
dma_buf->ops do not match the ttm_object_device's ops, but does so
without releasing the reference acquired by dma_buf_get(). Any
unprivileged renderD client passing a non-vmwgfx prime fd through the
DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per
call and indefinitely pins the foreign exporter's GEM resources.
Funnel the error path through the existing dma_buf_put() so the
reference is always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix leak of ungot volume
Fix afs_lookup_volume_rcu() so that it doesn't leak a dying volume if
afs_try_get_volume() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| Parallels Desktop runs prl_disp_service as root. Local clients reach it on the world-writable socket /var/run/prl_disp_service.socket. PrlSrv_LoginLocal accepts peer credentials. No Parallels signature. No admin group.
After login, PrlSrv_InstallAppliance lets you pick the appliance folder (sVmParentPath). The daemon unpacks with one string, tar -xf "%1" -C "%2", then Qt QProcess::splitCommand chops that string into words. A quote in the folder name closes early. The leftover text becomes extra tar flags. macOS tar --use-compress-program= runs the named program as root. |
| A weakness has been identified in D-Link DWR-M920 1.1.7. This issue affects the function sub_41E60C of the file /boafrm/formPinManageSetup. This manipulation of the argument newPin causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability has been found in SourceCodester Inventory Management System 1.0. Affected is an unknown function of the file /api/customers_handler.php of the component Customer Management Module. Such manipulation of the argument Customer_Name leads to cross site scripting. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. |
| Joomla Extension - regularlabs.com - Privileged stored XSS via url option in Snippets Free extension for Joomla < 7.0.0, Snippets Pro extension for Joomla < 11.0.0 - Snippets substitutes variable values supplied by an article tag into saved Snippet content. The affected versions do not consider the article author's trust level. A lower-privileged author can therefore place an unsafe value into a security-sensitive position chosen by the trusted Snippet author. |
| Affected versions of MISP permit unauthenticated or weakly constrained request paths to perform persistent work without adequate input bounds or rate limiting.
The users/forgot password-reset endpoint accepted an attacker-controlled email value without first imposing a reasonable length bound or validating its format. That value was then used to create an audit log entry and queue a password-reset job, causing the supplied value to be persisted more than once per request. The commit explicitly states that an unbounded unauthenticated request field was stored twice per call with no throttle.
The fix adds:
- a maximum email input length of 1024 bytes;
- email-format validation before persistent work;
- a per-source pre-authentication request budget;
- HTTP 429 responses when that budget is exceeded;
- a 15-minute cooldown for API-access request emails;
- POST-only handling and CSRF protection for the API-access request endpoint.
The new flood filter is specifically intended to limit persistent storage costs from anonymous requests such as password resets, registrations, and failed REST authentication attempts.
Version affected: ≤2.5.45 |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| HTML::FormHandler versions before 0.410002 for Perl render some error messages into HTML without escaping.
The Table form layout and the Bootstrap 2 and 3 wrappers splice each error string straight into the surrounding markup. Version 0.410000, the fix for CVE-2026-19872, escaped the equivalent values in the other layouts and wrappers, and 0.410002 extended that to these three.
Error messages that contain attacker-influenced content such as rejected field values could embed JavaScript in rendered pages. |
| HTML::FormHandler versions before 0.410002 for Perl render field attributes into HTML without escaping using the process_attrs method.
Any application with fields or field labels where some attributes are built from data rather than literals allows attacker-influenced text in an attribute value that can override the field attributes or embed JavaScript in rendered pages.
For example, the RadioGroup widget uses the process_attrs method via the render_option and wrap_radio methods. |
