| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
This needs to test for nonzero retval. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
Sashiko pointed out that there are a few lockless RCU readers
using test_bit() which is a relaxed atomic operation and
provides no memory barrier guarantees. Use test_bit_acquire()
instead where the operation may run parallel with add/del/gc,
i.e. is not one from the next cases
- protected by region lock
- in a set destroy phase
- in a new/temporary set creation phase |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit
1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing. |
| IBM Tivoli System Automation Application Manager 4.1 and IBM WebSphere Application Server is affected by cross-site scripting in the Administrative Console. |
| IBM Tivoli System Automation Application Manager 4.1 and IBM WebSphere Application Server is affected by a cross-site scripting vulnerability in the administrative console login page. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix RxGK token loading to check bounds
rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length
from the XDR token as u32 values and passes each through round_up(x, 4)
before using the rounded value for validation and allocation. When the raw
length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and
kzalloc both use 0 while the subsequent memcpy still copies the original
~4 GiB value, producing a heap buffer overflow reachable from an
unprivileged add_key() call.
Fix this by:
(1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket
lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with
the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX.
(2) Sizing the flexible-array allocation from the validated raw key
length via struct_size_t() instead of the rounded value.
(3) Caching the raw lengths so that the later field assignments and
memcpy calls do not re-read from the token, eliminating a class of
TOCTOU re-parse.
The control path (valid token with lengths within bounds) is unaffected. |
| IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.0.0 through 6.0.1.0 Secrets may be disclosed in log files in IBM Storage Scale Management GUI The admin password is logged into the GUI log of IBM Storage Scale Systems Deploy and Upgrade from GUI. Secrets may be disclosed in information related to exceptions in IBM Storage Scale Management GUI. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: fix NULL pointer dereference for a console without vc_data
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: add bounds check before accessing EA entries
in ntfs_ea_lookup and ntfs_listxattr, this verifies that there is enough
space in the EA entry before accessing the next_entry_offset field of
the EA entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: not change 0-byte $DATA attribute to non-resident
When ntfs_resident_attr_resize() cannot grow a resident attribute in
place, it retries after converting other resident attributes to
non-resident to free space in the MFT recrord.
Do not select zero-length resident $DATA attributes for this conversion.
fsck treats 0-byte non-resident $DATA attribute as corruptions. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index entries on reading
Validate index entries immediately after reading an index root or index
block from disk. This eliminates repeated checks in lookup and readdir,
and reduce the risk of missing checks in those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed
Creating a child cpuset where cpuset.mems is never set leads to a div/0
when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a
CPU hotplug event.
Reproduction steps:
1) Create a cgroup w/ cpuset controls (do not set cpuset.mems)
2) Move the task into the child cpuset
3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES
4) unplug and hotplug a cpu
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online
5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the
call to __nodes_fold()
The cpuset code passes (cs->mems_allowed) which is not guaranteed to have
nodes to the rebind routine. Use cs->effective_mems instead, which is
guaranteed to have a non-empty nodemask once we reach that code path.
[ david: add a comment, slightly rephrase description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
'level' is user space controlled and used to read from an array. Add the
missing array_index_nospec() call to prevent speculative execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation. |
