| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Sterling B2B Integrator 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.2.2.0 through 6.2.2.0_1 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: rtc: tear down old virtqueues before restore
virtio_device_restore() resets the device and restores the negotiated
features before calling ->restore(). viortc_freeze() intentionally
leaves the existing virtqueues in place so the alarm queue can still
wake the system, but viortc_restore() immediately calls
viortc_init_vqs() without first deleting those old queues.
If virtqueue reinitialization fails on virtio-pci, the transport error
path can run vp_del_vqs() against a newly allocated vp_dev->vqs array
while vdev->vqs still contains the old virtqueues. vp_del_vqs() then
looks up queue state through the new array and can dereference a NULL
info pointer in vp_del_vq(), crashing the guest kernel during restore.
This can also happen during a non-faulty reinitialization, when one of
the vp_find_vqs_msix() attempts is unsuccessful before a later attempt
would succeed.
Delete the stale virtqueues before rebuilding them. If restore fails
before virtio_device_ready(), reuse the remove path to stop the device.
Once the device is ready, return errors directly instead of deleting the
virtqueues again. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix heap overflow from oversized firmware HAL response
The firmware response dispatcher copies all synchronous HAL responses
into the 4096-byte hal_buf without validating the response length. A
response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow
with firmware-controlled content.
Add a bounds check on the response length. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes
snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD
and returns early when the flag is already set, but the flag is never
cleared again. A completed close ends in remove_slave_links(), which
leaves timeri->timer NULL, so a second close is already harmless through
the timer == NULL path; the early return can only be reached by an
instance that was opened again in between. For such an instance the
close unlinks nothing, so snd_timer_instance_free() frees an object that
is still on timer->open_list_head, still on snd_timer_master_list if it
was opened with a slave key, still owns any adopted slaves, and still
holds its timer and module references.
snd_seq_timer_open() reopens an instance exactly like that: it retries
its fallback open on the same object after a failure that has already
run snd_timer_close_locked() internally. An unprivileged user with
access to /dev/snd/timer and /dev/snd/seq can force that failure, since
snd_timer_check_master() returns -EBUSY when a pending slave matches the
new master's (slave_class, slave_id) key and the target timer has
reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class =
SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a
sequencer queue's key can be forged. The freed instance is afterwards
dereferenced by any further snd_timer_open() on that timer, by
snd_timer_check_slave(), and by /proc/asound/timers, which faults on the
stale ti->owner pointer.
The flag only has to be visible while the close is in progress, which is
all its other users need. Clear it in remove_slave_links(), under the
same timer->lock that sets it, once the instance is off every list. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync(). |
| IBM Sterling B2B Integrator 6.1.2.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.1.2.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 Ebics server component is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject exclusive maps as inner maps in map-in-map
An exclusive map (created with excl_prog_hash) is bound to a single
program by hash: check_map_prog_compatibility() refuses to load any
program whose digest does not match map->excl_prog_sha. That check
only runs for maps a program references directly, i.e. its used_maps.
A map reached at runtime through a map-of-maps is never in used_maps,
and bpf_map_meta_equal() does not consider excl_prog_sha, so an
exclusive map can be inserted into a non-exclusive outer map and
then looked up and mutated by an unrelated program, bypassing the
exclusivity guarantee.
For the signed loader this defeats the metadata map exclusivity check
added in the signed loader: the cached map->sha[] is validated against
the signed hash while another program on a hostile host rewrites the
frozen map's contents through the outer map. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: handle CB.InitCallBackState3 requests without a server record
The cache manager callback path now attaches the server record to an
incoming call through the rxrpc peer's app data. That association is
not guaranteed to exist for every callback request, and most callback
handlers already tolerate that case.
Make CB.InitCallBackState3 follow the same pattern by checking whether a
server record was attached before using it. If the peer is not mapped
to a server record, trace the request and ignore it, matching the
existing behaviour for other unmatched callback requests.
This keeps the callback handler consistent with the rest of the cache
manager service and avoids depending on peer state that may not be
available for a given request. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where a user could cause files outside the model repository to be read, written to, or modified by providing a path in the model name to the Triton MLflow plugin. A successful exploit of this vulnerability might lead to denial of service and information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will
be executed even though codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a wild
memory access when qfq has codel as a child:
[ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full)
[ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216
[ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000
[ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000
[ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024
[ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000
[ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578
[ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000
[ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0
[ 36.344359][ T370] PKRU: 55555554
[ 36.344481][ T370] Call Trace:
...
[ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057)
[ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump
The ring content dump in amdgpu_coredump() uses two separate loops over
adev->rings[]: the first counts rings with unsignalled fences to size
the allocation, and the second copies ring data into the allocated
buffers.
Both loops use the same condition to skip rings:
atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq
Because last_seq is an atomic that is updated concurrently by the fence
signalling path, additional rings may appear unsignalled in the second
loop that were signalled during the first. When this happens, idx
exceeds the allocated ring_count and the store to coredump->rings[idx]
writes past the end of the kcalloc-ed buffer.
This was found during IGT stressful test amd_queue_reset which
triggers random GPU resets. The OVERSIZE subtest
(CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes
a ring timeout and subsequent coredump, which hits the race between
the counting and copying loops. The failure is non-deterministic and
depends on fence signalling timing during the reset.
KASAN log:
BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu]
Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625
CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35
Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched]
Call Trace:
<TASK>
dump_stack_lvl+0xa5/0x110
print_report+0xd1/0x660
kasan_report+0xf3/0x130
__asan_report_store4_noabort+0x17/0x30
amdgpu_coredump+0x1274/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
drm_sched_job_timedout+0x194/0x5c0 [gpu_sched]
process_one_work+0x84b/0x1990
worker_thread+0x6b8/0x11b0
</TASK>
Allocated by task 23625:
kasan_save_stack+0x39/0x70
__kasan_kmalloc+0xc3/0xd0
__kmalloc_noprof+0x2ec/0x910
amdgpu_coredump+0x5c5/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
The buggy address belongs to the object at ffff888106154200
which belongs to the cache kmalloc-rnd-09-96 of size 96
The buggy address is located 16 bytes to the right of
allocated 72-byte region [ffff888106154200, ffff888106154248)
72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3
but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes
past the allocation.
Fix by adding an idx < ring_count guard to the copy loop so it cannot
exceed the allocated count even when the fence state changes between
the two passes. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-legacy: Bound DAI link iteration
create_sdw_dailinks() walks soc_dais until it finds an entry with
initialised cleared, but soc_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
This was reported by KASAN:
BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach]
Read of size 1
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: reject firmware sections with oversized data
In panthor_fw_load_section_entry(), the data size to copy is calculated
without validating it against the allocated section_size:
section->data.size = hdr.data.end - hdr.data.start;
If a crafted firmware sets data.size larger than the allocated memory,
this could cause a heap buffer overflow in panthor_fw_init_section_mem()
memcpy(section->mem->kmap, section->data.buf, section->data.size);
Additionally, if the section->data.size exceeds the BO size, could this
memset underflow the size calculation, leading to a massive out-of-bounds
zeroing of kernel memory?
memset(section->mem->kmap + section->data.size, 0,
panthor_kernel_bo_size(section->mem) - section->data.size);
Reject section entries whose initial data is larger than the section size. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: validate firmware interface structure sizes
iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual
address points inside the shared section. The returned pointer is later
used as a full firmware interface structure, so accepting an address near
the end of the shared section can still lead to out-of-bounds accesses.
Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges
that do not fit entirely in the shared section. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: harden runlist realloc size calculations
Add a shared helper to safely convert runlist element counts to byte sizes
using overflow checks, and use it in both ntfs_rl_realloc() and
ntfs_rl_realloc_nofail(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-sof: Bound DAI link iteration
create_sdw_dailinks() walks sof_dais until it finds an entry with
initialised cleared, but sof_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the reception of a reply packet before data transmission
Fix rxrpc_receiving_reply() to handle the reception of an apparent reply
DATA packet before rxrpc has had a chance to send any request DATA packets
on a client call by checking to see if the call has been exposed yet by
sending the first packet.
Without this, rxrpc_rotate_tx_window() might oops.
Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by
changing the do...while loop into a while loop, just in case a call is
abnormally terminated by an early reply before the last request packet is
transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix ACKALL packet handling
rxrpc_input_ackall() accepts ACKALL packets without checking whether the
call is in a state that can legitimately have outstanding transmit buffers.
A forged ACKALL can therefore reach a new service call in
RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued.
In that state call->tx_top is zero and call->tx_queue is NULL, so
rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a
null-pointer dereference.
Fix the handling of ACKALL packets by the following means:
(1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates
that the client call is connected, but nothing has been transmitted as
yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything
has been transmitted at least once, but we're now waiting for the
stuff remaining in the Tx buffer to be ACK'd (retransmissions may
still happen).
The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned
a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the
first packet is transmitted.
RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate
that all Tx packets have been ACK'd and we're now waiting for the
reply to be received.
(2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks
that the call state is one in which there might be stuff in the Tx
buffer to ACK, but now this includes AWAIT_ACK rather than
AWAIT_REPLY. ACKALL packets are ignored if received in the wrong
state.
Note that unlike Wyatt Feng's patch, it's no longer necessary to check
to see if the Tx buffer exists as this the state set now covers this.
(3) Make the ACKALL handler use call->tx_transmitted rather than
call->tx_top as the former is explicitly the highest packet seq number
transmitted, whereas the latter has a looser definition.
Thanks to Jeffrey Altman for a description of the history of the ACKALL
packet[1]. |
