| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, Max-Age processing can overflow and skip closing a connection. An attacker can consequently exhaust the connection pool temporarily until garbage collection resolves the connections. This issue is fixed in version 3.14.4. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: reject data replies with an out-of-range payload size
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required. |
| Gitea resolved the principals of an SSH certificate by searching the content of all stored public keys instead of only principal keys. When Gitea trusts a user certificate authority (`SSH_TRUSTED_USER_CA_KEYS`) and accepts arbitrary principals (`SSH_AUTHORIZED_PRINCIPALS_ALLOW=anything`), a user could register another user's public key line as their own principal, or a holder of a certificate signed by that authority could list it, and then authenticate as the owner of that key through the HTTP signature API and the built-in SSH server. Instances that do not trust a user certificate authority are not affected. |
| The Gitea web handlers for adding and removing reactions on issues and comments did not refuse locked issues for users without write access, although the API did. A signed-in user who could read an issue could therefore add or remove reactions on a locked issue and its comments, bypassing the interaction restriction of the lock. Only reactions were affected; no content could be changed. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
The channel path registry entry associated with a CHPID may be removed
while the subchannel's PMCW still references that CHPID. In this case,
chpid_to_chp() can return NULL, leading to a NULL pointer dereference.
Add the missing NULL check before dereferencing the returned pointer. |
| The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting several critical IP address ranges. Specifically, the following ranges were not blocked: 0.0.0.0/8 (unspecified, which routes to loopback on Linux), 100.64.0.0/10 (carrier-grade NAT per RFC 6598), ::/128 (IPv6 unspecified), fc00::/7 (IPv6 Unique Local Addresses), and fe80::/10 (IPv6 link-local). The existing list only covered IPv4 loopback (127.0.0.0/8), RFC 1918 private ranges, IPv4 link-local (169.254.0.0/16), and IPv6 loopback (::1/128).
An authenticated user with the ability to create or modify MISP attributes that trigger the html_to_markdown expansion module could supply URLs pointing to these unblocked internal address ranges. Because the module fetches the URL server-side to convert HTML content to Markdown, the request is made from the MISP server's network context. This allows an attacker to probe and read responses from internal services, carrier-grade NAT infrastructure, or link-local endpoints that would otherwise be unreachable from external networks. IPv4-mapped IPv6 forms (e.g., [::ffff:0.0.0.0]) also bypassed the existing checks.
The security impact is primarily confidentiality: an attacker can read data served by internal services reachable from the MISP server. The MISP instance itself is not compromised, but it is abused as a proxy to access otherwise restricted network resources. |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions before 2.4.8, from 3.0.0 through 3.1.8, and from 4.0.0 through 4.2.2, fast-uri percent-decodes the scheme component with the legacy global unescape() function before validating it, so an input whose decoded scheme is a dangerous token is emitted as a live scheme even though RFC 3986 does not allow percent-encoding in a scheme and no other parser accepts it. An application that screens dangerous schemes on the raw input and then stores or renders the normalized or resolved result can turn an inert string into an executable javascript, data, or vbscript URL, producing a stored or reflected cross-site scripting vector, and the equal() comparison treats an encoded and a plain scheme as the same, which can bypass equality-based allowlists. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject input whose scheme part contains a percent sign, or check the parsed scheme against an allowlist after normalization and use that same parsed result rather than the raw string. |
| A race condition vulnerability in the SessionManager of CNCF: Cloud Native Computing Foundation Argo CD v3.0.6 allows attackers to bypass rate limiting and perform a brute force attack via repeated crafted requests. |
| The issue was addressed with additional app bundle integrity checks. This issue is fixed in macOS Golden Gate 27. A maliciously modified app may not be prevented from launching. |
| An incorrect authorization vulnerability in the Data Access Layer (DAL) of Zyxel EX3501-T0 firmware versions through 5.44(ACHR.6)C0 could allow an authenticated attacker to escalate privileges by modifying the login_privilege data on an affected device. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nfcmrvl: validate helper command length before pull
The firmware download receive path removes the NCI data header and
reads the helper command before validating the remaining packet length.
A short frame can therefore reach the data access before the malformed
packet is rejected.
Validate the complete helper command length before stripping the NCI
data header. |
| Pillow is a Python imaging library. From 5.3.0 until 13.0.0, Pillow can return uninitialized memory as pixels when libtiff performs a short decode of JPEG-compressed or Group 4 fax TIFF data. The _decodeStrip and _decodeTile buffers can be larger than the bytes written by libtiff, but Pillow converts the expected rows without clearing the unwritten tail. The tile path is affected from 5.3.0 and the strip path from 6.0.0. An attacker can supply a crafted TIFF to an application that loads and returns or re-encodes its pixels. This can disclose stale heap contents without memory corruption or a process crash. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, and the conversion path emits those bytes as output pixel indices. An attacker who controls the palette image can obtain stack contents from a returned PNG or GIF. This can disclose addresses and stack-canary data without an out-of-bounds access, memory corruption, or process crash. This issue is fixed in version 13.0.0. |
| Deserialization of Untrusted Data vulnerability in VillaTheme AFFI – Affiliate Marketing for WooCommerce affi-affiliate-marketing-for-woo allows Object Injection.This issue affects AFFI – Affiliate Marketing for WooCommerce: from n/a through 1.0.10. |
| phpMyFAQ from 4.1.0 before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in the admin dashboard that allows authenticated users without admin rights to view restricted data. Attackers with any activated account can request /admin/index.php/ to read unpublished FAQ questions, admin edit URLs, recent user identities, and site statistics. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: bound the ATA passthru sense descriptor writes
When an ATA PASS-THROUGH command to an ATAPI device fails, the sense
buffer holds the device's REQUEST SENSE reply, and
ata_scsi_set_passthru_sense_fields() trusts its additional length
byte, sb[7], when adding the ATA Status Return descriptor. A faulty
or malicious device can use that to make the kernel read and write
past the 96-byte buffer in three ways:
- scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so
its clamp against sb[7] does nothing and the walk runs off the end.
- A type-9 descriptor found near the end is filled in unchecked.
- A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14,
so len 75..82 writes up to 8 bytes past the end.
Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE
reply patched:
BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210
BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50
Both are gone with this patch, and a valid descriptor is still filled
in. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: fix integer overflow in prb_calc_retire_blk_tmo()
prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic:
mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
If I'm reading the validation right, tp_block_size is user
controlled and packet_set_ring() only rejects values that are <= 0
as int or not page aligned, so a 256MiB block goes right through
(and alloc_one_pg_vec_page() even has a vzalloc fallback for it).
0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps
(div == 1) the function ends up returning -2047.
The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1,
so the trigger set is [256,512), [768,1024), [1280,1536) and
[1792,2048) MiB. Other sizes wrap to non-negative values and faster
links divide the unsigned value back below 2^31, which is why this
doesn't blow up for everyone.
What makes it fatal is what happens next in init_prb_bdqc():
p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...));
hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime,
HRTIMER_MODE_REL_SOFT);
A negative relative timeout expires immediately. The callback
unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns
the negative interval into hrtimer_resolution:
if (interval < hrtimer_resolution)
interval = hrtimer_resolution;
So the SOFT timer re-fires at the maximum rate forever, holding
sk_receive_queue.lock each pass. One CPU spins in softirq until the
socket is closed. Repeat with more rings and the machine is gone.
The overflow itself is ancient - it was introduced together with
TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer
implementation."). Its effect prior to f7460d2989fa ("net:
af_packet: Use hrtimer to do the retire operation", v6.18) was not
as clear-cut, though: the return value was stored into an unsigned
short retire_blk_tov, so a negative result was truncated, and a
0-jiffy delay loop could be programmed as well. Neither is nearly
as detrimental as the immediate maximum-rate spin the hrtimer
conversion turned it into.
(Unrelated to CVE-2019-20812 - that one was the ethtool failure path
returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.)
Reproducer, needs CAP_NET_RAW (a --network host container has it by
default) and a 1 Gbps NIC (QEMU e1000 works):
int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
bind(fd, ...);
int v = TPACKET_V3;
setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
struct tpacket_req3 req = {
.tp_block_size = 0x10000000,
.tp_block_nr = 1,
.tp_frame_size = 2048,
.tp_frame_nr = 0x10000000 / 2048,
.tp_retire_blk_tov = 0,
};
setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req));
Compute in 64 bits instead. The operands are already bounded by the
existing validation, so nothing else changes. If you'd prefer a
different fix, just say so and I'll respin. |
| Double free in Windows Internet Information Services allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix races in Tx timestamp handling
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one. |
